• Applied Biological Chemistry
• /
• v.38 no.4
• /
• pp.364-369
• /
• 1995

Anticarcinogenic activity of Moutan radix for mouse ascites cancer induced by mouse Sarcoma 180 (S-180) cells was investigated. Methanol extract of Moutan radix including other folk medicinal plants (Taxus cuspidata, Curcuma longa, Artemisia capillaris, Ligrstri fructus, and Liriope platyphylla) used to remedy or cure many chronic human diseases like cancer was fractionated into hexane, chloroform ($CHCl_3$), ethylacetate (EtOAc), and butanol (BuOH) fractions. Anticarcinogenic activity of the fractions, exhibited a strong cytotoxicity for L1210 and S-180 cells, was examined for mouse ascites cancer induced by S-180 cells. Male ICR mice (7 mice/treatment, $5{\sim}6$ weeks of age, $23{\pm}1\;g$ were injected i.p. with S-180 cells ($1{\times}10^{7}\;cell/1\;ml$ PBS). One day later, each mouse was given 0.1 ml of 10% DMSO containing sample ($30\;{\mu}g/g$ body weight) every day for 10 consecutive days. Control mice were only given 0.1ml S-180 cells and 0.1 ml 10% DMSO. Mice treated with EtOAc fraction of Moutan radix showed 28.7 days of life, which is 167% of control mice's life. Based on the dose-dependant experiment mice treated with $30\;{\mu}g$ showed longer life relative to mice treated with ootherr doses (5, 15, $60\;{\mu}g$), and mice treated with $60\;{\mu}g$ exhibited toxic symptoms. Body weight of mice treated with Moutan radix was significantly reduced relative to that of control mice (p<0.05). GC-MS analysis in conjunction with silica-gel column chromatography revealed that the EtOAc fraction contained 2-methoxylphenol, benzoic acid, 1-(4-hydroxy-3-methoxyphenyl)ethanone, 8-methyl-2,4(1H,3H)pteridinedione and 2,5-furan-dicarboxylic dimethyl ester as regards to the anticarcinogenic property of the EtOAc fraction. These results suggest that Moutan radix might be included as an anticarcinogenic medicinal plant for treatment of ascites cancer.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.277-283
• /
• 2011

In this study, engineering grade and high intensity reflective sheets were prepared with glass beads and their reflection performance and physical properties were investigated. The reflective sheets prepared by using glass beads are divided into enclosed or encapsulated lens type, depending on whether the glass beads are open in air or not. Because of an extra layer on the glass bead surface, the enclosed lens type reflective sheets show very little change in the properties by bad weather conditions, compared to encapsulated lens type reflective sheets. Optimization of the amount of glass beads on the surface was carried out, which determines the retroreflective properties. Enclosed and encapsulated lens type reflective sheets with various colors were prepared and their coefficients of retroreflection were determined. The encapsulated type reflective sheet with white color shows a coefficient of retroreflection of $210.4cd/1x{\cdot}m^2$, which is higher than the enclosed type ($74cd/1x{\cdot}m^2$). Effect of washing on the reflective property and adhesive power of the reflective sheets was investigated, and it is found that the number of glass beads decreased with washing and the aluminum layer deposited was damaged extensively in the encapsulated lens type reflective sheets.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.400-409
• /
• 2015

This study examined the plant growth and development characteristics of leafy vegetables on the hydroponic substrates of waste wood chips, radiate pine chips, and mat type of waste wood chips. The bulk density of waste wood chips and radiata pine chips were $0.2g/cm^3$ and $0.16g/cm^3$, respectively. The moisture retention properties of both the radiata pine chips and waste wood chips were found to be similar but not better than those of the control rock wool and coco peat hydroponic substrates. The moisture retention property of the mat type was found to be the lowest. The chemical analysis of waste wood hydroponic substrates (w/v) was as follows.; The pH was 6.59, electric conductivity was 6.76 dS/m, total nitrogen content was 0.5%, C/N ratio was 113%, phosphorus was 10.1 ppm, potassium was 77 ppm, calcium was 531 ppm, magnesium was 49 ppm, and sodium was 96 ppm. The results from the radiata pine chemical analysis showed that it had a pH of 5.29, electric conductivity of 4.49 dS/m, total nitrogen content of 0.32%, C/N ratio of 180%, phosphorus of 6.4 ppm, potassium of 83 ppm, calcium of 97 ppm, magnesium of 29 ppm, and sodium of 59 ppm. Except for the plants grown in mat type, the developmental characteristics of the plants grown in rock wool and coco peat hydroponic substrates were similar. Based on the results of the experiment, waste wood resources may possibly be used as an organic solid medium in place of the existing rock wool and coco peat medium.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.10
• /
• pp.1448-1453
• /
• 2012

Fried fish pastes containing different size and amounts of red ginseng powder (RGP) were manufactured, and their physico-chemical and biological properties, including color changes, preservation, weight loss after heating, lipid oxidation, and total colony count were analyzed to improve fish paste quality. Sensory evaluation of fish pastes containing RGP was carried out, and the results showed that 1% and 850 ${\mu}m$ sized RGP additives were most preferred. In the color change test, decreased $L^*$ (lightness), increased $a^*$ (redness), and increased $b^*$ (yellowness) values were observed, which was similar to other additive-containing commercial fish pastes. In the physical properties test, hardness and chewiness significantly increased in the 90 ${\mu}m$ sized RGP group. Weight loss of fish pastes containing RGP after heating was attenuated compared to commercial fish pastes. Fish paste containing RGP showed an inhibitory effect on lipid oxidation. Especially, the 10 ${\mu}m$ sized RGP group showed the most significant inhibitory effect on lipid oxidation and reduced total microbes during storage. Therefore, 1% addition of RGP can give rise to high quality fish pastes through improvement of sensory evaluation and physico-chemical properties. Moreover, functionally and physiologically improved fish pastes can be produced by adding different amounts of RGP.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.111-115
• /
• 2013

The optimum synthetic conditions of poly(p-phenylphenol) by horseradish peroxidase in dioxane:water (80:20 v/v) mixtures were studied. The stability against thermal degradation and structural properties of the synthesized phenolic resins were investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), respectively. The synthetic yield of poly(p-phenylphenol) increased upon the increase of the amount of enzyme up to 0.25 mg HRP/mL, then leveled off for further increase of the enzyme usage. When sodium acetate (100 mM, pH 4~6) and sodium phosphate (100 mM, pH 7~9) were used as the buffering salts for the aqueous component (20% v/v), the synthetic yield of the resin increased at higher pH of the aqueous buffer. But when the pHs of the aqueous buffer were 6 and 9, the synthetic yield strongly depended on the types of the buffering salts; if sodium phosphate was used instead of sodium acetate at pH 6, the yield decreased by about 15% and if sodium bicarbonate was used instead of sodium phosphate, the yield decreased by almost 20%. When the pH range of the aqueous buffer was from 4 to 7, the addition of a radical mediator, 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonate) (ABTS), up to 2 mM improved the synthetic yield of the resin by about 10%. TGA experiments revealed that the thermal stability of the resin synthesized in dioxane:water (100 mM sodium phosphate, pH 9) (80:20 v/v) was high having the char yield of 47% upon the heating at $800^{\circ}C$. DCS results showed that the structures of the polymers synthesized in acidic aqueous buffers were different from those of the polymers synthesized in the basic aqueous buffers. However, all the synthesized resins were found to have the property of the thermosetting resins.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.67-73
• /
• 2014

Purpose: The purpose of present study is to compare mechanical properties and microstructural characteristics of fractured surface for cast, 3-D printing laser sintered and CAD/CAM milled cobalt-chromium (Co-Cr) alloy specimens and to investigate whether laser sintered technique is adequate for dental applications. Materials and methods: Thirty six flat disc shape Co-Cr alloy specimens were fabricated for surface hardness test and divided into three groups according to the manufacturing methods; 12 specimens for casting (n=12), 12 specimens for laser sintered technology (n=12) and 12 specimens for milled technology (n=12). Twelve dumbbell shape specimens for each group were also fabricated for a tensile test. Statistical comparisons of the mechanical properties for the alloys were performed by Kruskal-Wallis test followed by Mann-Whitney and Bonferroni test. The microstructural characteristics of fractured surfaces were examined using SEM. Results: There were significant differences in the mean Vickers hardness values between all groups and the cast specimen showed the highest (455.88 Hv) while the CAD/CAM milled specimen showed the lowest (243.40 Hv). Significant differences were found among the three groups for ultimate tensile strength, 0.2% yield stress, elongation, and elastic modulus. The highest ultimate tensile strength value (1442.94 MPa) was shown in the milled group and the highest 0.2% yield strength (1136.15 MPa) was shown in the laser sintered group. Conclusion: Different manufacturing methods influence the mechanical properties and microstructure of the fractured surfaces in Co-Cr alloys. The cast Co-Cr alloy specimens showed the highest Vickers hardness, and the CAD/CAM milled specimens revealed the highest tensile strength value. All alloys represent adequate mechanical properties satisfying the ISO standards of dental alloy.

• Neonatal Medicine
• /
• v.17 no.2
• /
• pp.181-192
• /
• 2010

Purpose: Current studies have demonstrated the neuroprotective effects of dizocilpine (MK-801) in many animal models of brain injury, including hypoxic-ischemic (HI) encephlopathy, trauma and excitotoxicity, but limited data are available for those during the neonatal periods. Here we investigated whether dizocilpine can protect the developing rat brain from HI injury via anti-apoptosis. Methods: In an in vitro model, embryonic cortical neuronal cell culture of Sprague-Dawley (SD) rats at 18-day gestation was done. The cultured cells were divided into three groups: normoxia (N), hypoxia (H), and hypoxia treated with dizocilpine (HD). The N group was prepared in 5% $CO_2$ incubators and the other groups were placed in 1% $O_2$ incubators (94% N2, 5% $CO_2$) for 16 hours. In an in vivo model, left carotid artery ligation was done in 7-day-old SD rat pups. The animals were divided into six groups; hypoxia (N), hypoxia (H), hypoxia with sham-operation (HS), hypoxia with operation (HO), HO treated with vehicle (HV), and HO treated with dizocilpine (HD). Hypoxia was made by exposure to a 2 hour period of hypoxic incubator (92% N2, 8% $O_2$). Results: In the in vitvo and in vivo models, the expressions of Bcl-2 in the hypoxia groups were reduced compared to the normoxia group. whereas those in the dizocilpine-treated group were increased compared to the hypoxia group. However. the expressions of Bax and caspase-3 and the ratio of Bax/Bcl-2 were revealed reversely. Conclusion: Dizocilpine has neuroprotective property over perinatal HI brain injury via anti-apoptosis.

• Korean journal of food and cookery science
• /
• v.24 no.6
• /
• pp.905-911
• /
• 2008

Dried and roasted Gugija (Lycii fructus) were extracted with water, 50% ethanol and 100% ethanol, after which the physico-chemical properties of the extracts were evaluated. The extraction yield was higher when using water for the extraction solvent than when the other solvents were used, while the water extract of roasted Gugija had the highest yield. Furthermore the pH of the extracts increased as the ethanol concentration increased, and the pH of dried Gugija was higher than that of roasted Gugija when extracted using the same extraction solvent. The sugar concentrations of the extracts from dried and roasted Gugija were $15.0{\sim}20.1\;%Brix$ and $18.0{\sim}21.2\;%Brix$, respectively. The total polyphenol contents of the extracts from the dried and roasted Gugija were $6.9{\sim}19.0\;mg/g$ and $12.4{\sim}15.8\;mg/g$, respectively. Dried Gugija extract with water had a higher the total polyphenol contents than the other extract. The total polyphenol contents of roasted Gugija extracts were higher than those of dried Gugija, when using 50% or 100% ethanol for extraction solvent. The electron donating ability and total antioxidant activity of dried Gugija were $67.6{\sim}87.7%$ and $58.6{\sim}85.0%$, respectively, whereas those of roasted Gugija were $84.7{\sim}89.8%$ and $80.6{\sim}83.7%$, respectively. Dried and roasted Gugija extracts were higher electron donating ability and total antioxidant activity, when using water, and 50% or 100% ethanol, respectively. The predominant amino acid in all extracts was threonine. The essential amino acids constituted approximately $44.9{\sim}63.6%$ and $45.4{\sim}59.0%$ of the total amino acids of extracts from the dried and roasted Gugija, respectively. Finally, the total polyphenol contents and antioxidant activities showed that optimal extraction solvent would be water, and 50% or 100% ethanol for dried and roasted Gugija, respectively.

• Journal of the Society of Disaster Information
• /
• v.10 no.4
• /
• pp.583-597
• /
• 2014

Fire caused by heater has various causes as many as the types of heater. also, lots of damage of human life and property loss are caused, since annually continuous fire accident by heater in traditional market is frequently occurring. There are not many cases of fire due to heater in most of residential facilities such as general house, apartments, etc., because they are supplied with heating boiler, however the restaurant, store and office of the market, sports center, factory, workplace, etc. still use heater, e.g. oilstove, electric heater, etc., so that they are exposed to fire hazard. Also, when investigating the number of fire due to heater, it was analyzed to occur in order of home boiler, charcoal stove, oilstove, gas heater/stove, electric stove/heater, the number of fire per human life damage was analyzed in order of gas heater/stove, oil heater/stove, electric heater/stove, briquette/coal heater. Also, gas and oil related heater were analyzed to have low frequency, however, with high fire intensity. Therefore, this research aimed at considering more scientific fire inspection and identification approach by reenacting and reviewing fire outbreak possibility caused by combustibles' contact and conductivity under the normal condition and abnormal condition in respect of ignition hazard, i.e. minimum ignition temperature, carbonization degree and heat flux along with it, due to oilstove and electric stove, which are still frequently used in public use facility, traditional market, and, of which actual fire occurrence is the most frequent. As the result of reenact test, ignition hazard appeared very small, as long as enough heat storage condition is not made in both test objects(oilstove/electric stove), however carbonization condition was analyzed to be proceeded per each part respectively. Eventually, transition to fire is the ignition due to heat storage, so that it was analyzed to ignite when minimum heat storage temperature condition of fire place is over $500^{\circ}C$. Particularly, in case of quartz pipe, the heating element of electric stove, it is rapidly heated over the temperature of $600^{\circ}C$ within the shortest time(10sec), so that the heat flux of this appears 6.26kW/m2, which was analyzed to result in damage of thermal PVC cable and second-degree burn in human body. Also, the researcher recognized that the temperature change along with Geometric View Factor and Fire Load, which display decrease of heat, are also important variables to be considered, along with distance change besides temperature condition. Therefore, the researcher considers that a manual of careful fire inspection and identification on this is necessary, also, expects that scientific and rational efforts of this research can contribute to establish manual composition and theoretical basis on henceforth fire inspection and identification.