• Korean Journal of Materials Research
• /
• v.17 no.9
• /
• pp.480-483
• /
• 2007

Hydroxyapatites were prepared by the different $SiO_2$ addition at $1450^{\circ}C$ for 2h. With the increase of $SiO_2$ addition, microstructure, bulk density, porosity, mechanical strength of $hydroxyapatite/{\beta}-TCP$ composite were investigated. When the sintered HAp contained 1 wt% $SiO_2$, the each properties of the HAp were increased. But the excess addition of $SiO_2$ content above 1wt% the each property were decreased. This results were due to the ${\beta}-TCP$ phase. The ${\beta}-TCP$ phase appeared at 3 wt% $SiO_2$ addition and the ${\beta}-TCP$ phase was enhanced by the $SiO_2$ increasing.

• Progress in Superconductivity
• /
• v.14 no.1
• /
• pp.11-16
• /
• 2012

Based on fully self-consistent dynamical mean field theory (DMFT) method, we investigate electronic structure and Fermi surface nesting property of LiFeAs and NaFeAs, focusing on the correlation effect of iron 3d orbital. For LiFeAs, good nesting property by density functional theory (DFT) method is much suppressed by DFT+DMFT method due to the orbital-dependent renormalization magnitude. NaFeAs shows a similar behavior, but a better nesting is obtained than LiFeAs from DFT+DMFT Fermi surfaces. Our result is consistent with the observed superconducting (spin density wave) ground state of LiFeAs (NaFeAs).

• Journal of Environmental Science International
• /
• v.20 no.10
• /
• pp.1309-1317
• /
• 2011

This study selected 6 river reach, which have various curved-channel, included in an object of study as making the Nakdong River, which is a real nature river, as a point of an object of study by using SMS RMA-2 model, a 2D numerical analysis model, and applied project flood and analyzed and examined characteristic of hydrological property and super-elevation, which includes characteristic of the velocity of a moving fluid. As a result, in a river reach, whose width is wide, angle of curved-channel has impact on the velocity of a moving fluid of inside of curved-channel and in a river reach, whose width is narrow, the radius of curvature and width of the river have impact on the velocity of a moving fluid of inside of curved-channel. Also it found out that the ratio of reduction in water-level of inside of curved-channel is more bigger than ratio of increasing in water-level of outside of curved-channel when project flood is increasing and angle of curve is increasing. Based on this, this study would be used as a expectation of danger and preliminary data in planning real river or a business, that creates an environment.

• Bulletin of the Korean Mathematical Society
• /
• v.33 no.3
• /
• pp.359-366
• /
• 1996

A linear map T from a Banach algebra A into a Banach algebra B is almost multiplicative if $\left\$\mid$ T(fg) - T(f)T(g) \right\$\mid$ \leq \in\left\$\mid$ f \right\$\mid$\left\$\mid$ g \right\$\mid$(f,g \in A)$ for some small positive $\in$. B.E.Johnson [4,5] studied whether this implies that T is near a multiplicative map in the norm of operators from A into B. K. Jarosz [2,3] raised the conjecture : If T is an almost multiplicative functional on uniform algebra A, there is a linear and multiplicative functional F on A such that $\left\$\mid$ T - F \right\$\mid$ \leq \in', where \in' \to 0$ as $\in \to 0$. B. E. Johnson [4] gave an example of non-uniform commutative Banach algebra which does not have the property described in the above conjecture. He proved also that C(K) algebras and the disc algebra A(D) have this property [5]. We extend this property to a derivation on a Banach algebra.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.911-914
• /
• 2003

The prevention of D-Dos Attack requires to install filters at As border routers. This follows that finding minimum number of filters - VC(Vertex Cover), which is NP-complete problem. So, We propose improved 'Approximate VC' which is more efficient to real AS topology using topology property. Simulation shows that our algorithm, improved 'Approximated VC' enables us to reduce 25% VC nodes in comparison with 'Approximated VC'.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.325-327
• /
• 1998

Disk type single-phase switched reluctance motor which has an advantage of simple robust construction, simple control circuity, and low manufacturing cost has a specific property of axial flux machine and radial flux machine simultaneously. So, this DSPSRM has a complicated magnetic circuit and it is difficult to analyze characteristics of DSPSRM for design. In this paper, we used to analyze the effects of radial flux and axial flux simultaneously by 3D-finite element method. From the results of 3-D FEM, we obtained the approximated torque characteristics of DSPSRM. It's analysis results can be used in optimal design of DSPSRM considering the saturation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.173-176
• /
• 2009

A great emphasis has been placed on the design of heat treatment process to achieve desired microstructure and mechanical property of final product. In this study, finite element analysis was carried out to predict temperature, microstructure and hardness of eutectoid steel after water quenching. Convective heat transfer coefficients were determined by inverse analysis using surface temperatures measured with three different installation methods of thermocouples. Finally, the effect of convective heat transfer coefficients on the prediction of temperature history and hardness was analyzed by comparing experimental and simulation results.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1023-1024
• /
• 2006

Al-8Fe-2Mo-2V-1Zr alloys were prepared by the gas atomization/hot extrusion and the melt spinning/hot extrusion. For the gas atomized and extruded alloy, equiaxed grains with the average size of 400 nm and finely distributed dispersoids with their particle sizes ranging from 50nm to 200nm were observed. For the melt spun and hot extrusion processed alloy, refined microstructural feature consisting of equiaxed grains with the average size of 200nm and fine dispersoids with their particle sizes under 50nm appeared to exhibit a difference in microstructure. Strength of the latter alloy was higher than that for the former alloy up to elevated temperatures.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.486-488
• /
• 2003

Some important properties of the liquid crystal molecules containing fluoro-isothiocyanated molecules have been studied using quantum chemical calculations and the results were correlated with respect to the structure of the molecules. Dielectric anisotropy, birefringence have been predicted for several unknown structures. The Maier-Meier, Vuks equation were used for the dielectric anisotropy and birefringence calculation. The results obtained by empirical approximation showed a good agreement with experiment ones.

• Communications of the Korean Mathematical Society
• /
• v.20 no.1
• /
• pp.135-144
• /
• 2005

We consider the stochastic differential inclusion of the form $dX_t{\in}{\sigma}(t, X_t)dB_t+b(t, X_t)dt$, where ${\sigma}$, b are set-valued maps, B is a standard Brownian motion. We prove that the set of solutions is closed.