• 대한조선학회논문집
• /
• 제43권3호
• /
• pp.294-303
• /
• 2006

A surface piercing propeller (SPP) in tunnel has been proposed recently as a new propulsion system for a high speed air cavity ship. The purpose of the present study is to investigate the characteristics of the SPP in tunnel through a series of model tests. A model propulsion system is placed on a dummy body made of Acrylics. The tunnel is divided into two regions by a guide vane extending from the inlet to the center of the propeller shaft. Air has been supplied from an air nozzle placed at the bottom of the dummy body and the changes in propeller performances caused by the air flow are investigated. The measurements are done for open water and in-tunnel conditions, both for fully and partially submerged propeller. The influence of the guide vane configurations on the propeller performance is also studied. The experiments are performed at the variable pressure circulation water channel of Inha University

• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.107-117
• /
• 2007

A surface piercing propeller (SPP) in tunnel has been proposed recently as a new propulsion system for a high speed air cavity ship. The purpose of the present study is to investigate the characteristics of the SPP in tunnel through a series of model tests. A model propulsion system is placed on a dummy body made of Acrylics. The tunnel is divided into two regions by a guide vane extending from the inlet to the center of the propeller shaft. Air has been supplied from an air nozzle placed at the bottom of the dummy body and the changes in propeller performances caused by the air flow are investigated. The measurements are done for open water and in-tunnel conditions, both for fully and partially submerged propeller. The influence of the guide vane configurations on the propeller performance is also studied. The experiments are performed at the variable pressure circulation water channel of Inha University.

• 한국해양공학회지
• /
• 제33권2호
• /
• pp.196-202
• /
• 2019

In this study, the excessive noise and vibration phenomena of a high-speed Ro/Ro passenger ship were analyzed, and a countermeasure was taken based on them. This ship was granted a comfort class notation by the classification society, which was COMFORT-VIBRATION-II and COMFORT-NOISE-CREW-II. However, unfortunately, excessive noise and vibration in the aft part of the ship were delivered from the twin shaft propellers, and therefore the Class Requirement was not satisfied before delivery. In order to obtain the class notation, all of the concerned parties came to an agreement to reduce the noise and vibration level during operation after delivery because a seasonal ferry service was already scheduled and the cabin was fully booked. The root cause of the massive amount of noise and vibration was mainly the propeller-induced excitation pulse and beating that occurred from the mismatch of the rotating speeds of the two shaft lines. A 1st order vibrating force and beating phenomena existed in the propeller. Thus, a reduction of the excitation force, elimination of the beating phenomena, and decrease of the noise level at the aft area cabins and public spaces were required. In addition, structural reinforcements were conducted using pillars and additional girders at the aft part of the decks.

• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.74-79
• /
• 2008

The fracture strength of cross groove type constant velocity joint is largely determined by the fracture strength of the cage having window-like pockets for retaining the torque transmitting balls. A stress distribution acting on the cage is influenced by rigidities of the rim portion and of the column members, therefore requires a calculation such as FEA. To analyze fracture strength of cage, a 3-D elasto-plastic finite element analysis and a submodeling technique are used to achieve both computational efficiency and accuracy. The results are in reasonably good agreement with experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권2호
• /
• pp.36-46
• /
• 1995

In this paper, fatigue crack propagation behaviors were investigated experimentally for the materials, carbon steel forgings (SF45A, SF50A, SF60A) which are used in the marine propeller shaft. The results obtained are as follows: The number of cycles required to grow crack length 1.30mm from microcrack initiation was about 60% of the total fatigue life. Fatigue crack propagation rate was expressed by the equation d(2a)/dN_B 2a/$N_f$ and the result was agreed well with the experimented data. And the equation d(2a)/dN=$C{\sigma}_a^m(2a)^n$ was evaluated also. Obtained material property m and n are 3~5 and 1-1.5 respectably, and the result was reasonably agreed to the data obtained from experiments.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1997년도 제9회 학술강연회논문집
• /
• pp.31-31
• /
• 1997

우수한 비강성과 비강도를 지닌 복합재료를 이용한 자동차용 추진축(Propeller Shaft)의 사용은 자동차의 구조정량화, 소음/진동 감소, 승차감 향상 측면에서 개선된 효과를 기대할 수 있다. 본 연구에서는 탄소섬유/에폭시 필라멘트 와인딩(Filament Winding) 공빔을 적용한 복합재료 튜브와 금속재 플랜지 그리고 유니버셜 조인트로 구성된 상용 차의 추진축 개발과정 중 축의 진동특성에 대한 적합한 형상과 물성을 찾기 위해 유한요소법을 적용한 자유진동 해석과 FFT 해석장비를 이용한 진동실험 그리고 축을 운용속도까지 회전시켜 공진(Resonance) 현상 발생 유무를 소음량의 측정으로 판단하는 시험이 수행되었다. 그 결과 요구조건에 적합한 진동특성을 나타내는 추진축의 형상을 결정할 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 지능정보 및 응용 학술대회
• /
• pp.149-150
• /
• 2008

일반적으로, 소나 표적의 식별을 위한 PSR(Propeller Shaft Rate) 추정 알고리즘은 다음의 문제점들을 가지고 있다. 즉, 주파수 스펙트럼으로부터 하모닉군을 구별하는 것은 필수적이면서도 어렵기 때문에 정확하고 효율적인 구별법을 요구한다. 나아가, 구조와 파라메터에 있어서 용이한 설계 절차를 요구한다. 이 문제들을 해결하기 위해서 전문가 지식 및 진화 전략(ES : Evolution Strategy)을 이용하는 진화적인 PSR 추정기가 제안되었다. 시뮬레이션 결과는 제안된 알고리즘이 그 문제점들을 효과적으로 해결할 수 있음을 보여준다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.61-66
• /
• 2008

Impact behavior of large SF590A (Fe-0.65C-1.5Mn-0.035P-0.035S-0.3Cr-0.15Mo-0.4Ni-0.3Cu) forged propeller shaft was studied in this study. Charpy impact specimens were prepared from the forged product with different heat number. The impact value of each specimen with different heat number tends to vary greatly depending on the prior austenite grain size and, less significantly, on the amount of sulfur. The dominant metallurgical factors affecting impact behavior of SF590A forged product are discussed based on fractographic and metallographic observations.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.206-210
• /
• 2005

As design trends has changed to have flexible aft hull structure, increased power output and stiffer shafting system, owners and classification societies have more concerned about shaft alignment. In the shaft alignment analysis, there are many uncertainties which are related in propeller generated force, bearing stiffness, crank shaft model and etc. in this study, it is focused on the effect of crankshaft model by comparing between equivalent model and actual crankshaft model.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권4호
• /
• pp.310-315
• /
• 2017

최근 건조되는 선박은 연료소비량을 절감하고 안락한 운항을 위해서 고효율 프로펠러를 부착하고 있다. 이와 같이 고효율 프로펠러가 탑재됨에 따라 이전의 프로펠러 특성을 고려한 프로펠러 감쇠방법을 이용하여 해당 축계의 비틀림진동 해석을 할 경우에는 해석 오차가 많이 발생되고 있다. 이러한 오차는 고효율 프로펠러의 개발이 지속됨에 따라 더욱 커질 것으로 예상된다. 본 논문에서는 비틀림진동 해석에 적용되고 있는 각종 프로펠러 감쇠 적용방법들에 따른 해석 편차를 검토하였다. 또한 고효율 직결식 10MW급 프로펠러를 적용한 선박들을 대상으로 프로펠러 감쇠 적용방법에 따른 해석치와 계측 결과를 비교 검토하여 현 시점에서 사용상 적절한 프로펠러 감쇠방법을 제시하였다.