• Journal of KIISE
• /
• v.43 no.12
• /
• pp.1342-1350
• /
• 2016

Induction and coinduction are well-established proof principles, which are widely used in mathematics and computer science. In particular, induction is taught in most undergraduate programs and well understood in the field of computer science. In contrast, coinduction is not as widespread or well understood as induction. In this paper, we introduce coinduction by defining a subtype system for recursive and union types and proving the transitivity property of the system. This paper will help to promote familiarity with coinduction and provides a basis for a subtype system for recursive types with other advanced type constructors and connectives.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1977-1983
• /
• 2009

This paper described partial discharge(PD) patterns depending on types of insulation defects in CNCO-W cable(Concentric Neutral Closs-linked Polyethylene Insulated Polyolefin-Water Proof Sheathed Power Cable). The PD measurement system consists of a coupling network, a detection impedance, and a low noise amplifier. A 16 bit, 250 MS/s data acquisition system was used to analyze PD patterns. To simulate insulation defects in a power cable, a needle with the curvature radius of $10{\mu}m$ was inserted into the insulation part. We measured phase ($\Phi$), magnitude (q), and counts (n) of PD pulse for the defects, and classified PD patterns using the PRPD (phase Resolved Partial Discharge) method. From the analysis of acquired PD signals, we could find that a unique PD pattern is formed according to the types of defect.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1394-1397
• /
• 1995

In the hazardous areas where explosive gases, vapor or mists exist, electrical apparatus and installations must be of explosion-proof construction to prevent or limit the danger of the ignition of potentially explosive atmosphere. In Korea, nine types of protection have been specified in the government regulations at present: flameproof enclosure, pressurization, oil immersion, increased safety, intrinsic safety, non-incendive, sand filling, encapsulation, and special types. Among these types, the intrinsic safety has the construction which limit or by-pass igniting the electric energy using electronic devices. This type has lots of merits but at the same time requires a high-degree of technology. In this paper, we investigated several dominating factors which affect the minimum ignition energy: this energy plays a very important role in design and evaluation of the intrinsic safety type electrical apparatus. Eletrode material, which is one of the most important factors, was intensively studied for the five sorts of material(Al, Cd, Mg, Sn, and Zn) with performing experiment in a low-voltage inductive circuit using IEC-type spark apparatus. The experimental results show that the minimum ignition energy of electrode material is varied: highest in Cd and lowest in Sn. We also confirmed the effect of eletrode make-and-break speed and magnetic field magnitude.

• Journal of the Korean Society of Safety
• /
• v.27 no.3
• /
• pp.63-70
• /
• 2012

In the hazardous areas where explosive gases, vapor or mists exist, electrical apparatus and installations must be the explosion-proof construction to prevent or limit the danger of the ignition of potentially explosive atmosphere. In Korea, nine types of protection have been specified in the government regulations at present: flameproof enclosure, pressurization, oil immersion, increased safety, intrinsic safety, non-incendive, powder filling, encapsulation, and special types. Among these types, the intrinsic safety has the construction which limit or by-pass igniting the electric energy using electronic devices. This type has lots of merits but at the same time requires a high-degree of technology. In this paper, we investigated several dominating factors which affect the minimum ignition energy; this energy plays a very important role in design and evaluation of the intrinsic safety type electrical apparatus. Electrode material, which is one of the most important factors, was intensively studied for the five sorts of material(Al, Cd, Mg, Sn, and Zn) with performing experiment in a low-voltage inductive circuit using IEC-type(International Electro-technical Commission) spark apparatus. The experimental results show that the minimum ignition energy of electrode material is varied: highest in Cd and lowest in Sn. We also confirmed the effect of electrode make-and-break speed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.4
• /
• pp.370-377
• /
• 2009

A simple preliminary analysis is often useful to check a validity of design alternatives before the detailed analysis phase in the viewpoint of efficiency. This paper describes a preliminary analysis procedure for the selection among basket design candidates for the spent fuel shipping cask of Korean standard nuclear power plant. As the cask should maintain the structural integrity in hypothetical accident condition, the case of 9 m drop is significantly considered as the worst scenario among the accident conditions in structural design viewpoint in this paper. As basket design options, totally four different types are considered and analyzed in the point of structural integrity at drop impact and weldability for fabrication. As a result, an insertion round plate type with densely spaced supports turns out to be the best in both of the viewpoints, though the weld plate type shows a bit more design margin.

• Electronics and Telecommunications Trends
• /
• v.33 no.1
• /
• pp.45-56
• /
• 2018

A Blockchain is a type of distributed ledger system that consists of a large number of nodes. A block is a container in which transactions are included, and the transactions can be recorded in chronological order by chaining blocks. To work properly, it is essential that the nodes in the Blockchain system have the same image of the chained-blocks. Blockchain systems use various types of consensus algorithms to achieve the same states among the nodes, and the fundamental elements in these algorithms are proof of work and the main chain selection policy, particularly in permissionless Blockchain systems. However, consensus algorithms for permissioned Blockchain systems can be completely different from those of permissionless blockchain systems. In this paper, we overview the basic working mechanism of consensus algorithms, and briefly introduce a few that are currently being applied.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.438-441
• /
• 1996

The objective of this study is to select reward measure of improved business results. Grain sharing is defined as a compensation system that is designed to provide for variable compensation and to support an employee involvement process by rewarding the members of a group or organization for improvements in organizational performance. Gains, as measured by a predetermined formula, are shared with all eligible employees, typically through the payment of cash bonuses. Generally sales, profit, value-added, cost reduction portion and otherthings have been used as gains, otherwise improved business results, without any proof which is correlated to productivity improvement. This paper suggests which business result is fit reward measure for each business types and sizes.

• Bulletin of the Korean Mathematical Society
• /
• v.50 no.3
• /
• pp.731-745
• /
• 2013

In this paper, we investigate uniqueness problems of certain types of $q$-difference polynomials, which improve some results in [20]. However, our proof is different from that in [20]. Moreover, we obtain a uniqueness result in the case where $q$-differences of two entire functions share values as well. This research also shows that there exist two sets, such that for a zero-order non-constant meromorphic function $f$ and a non-zero complex constant $q$, $E(S_j,f)=E(S_j,{\Delta}_qf)$ for $j=1,2$ imply $f(z)=t{\Delta}_qf$, where $t^n=1$. This gives a partial answer to a question of Gross concerning a zero order meromorphic function $f(z)$ and $t{\Delta}_qf$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.2219-2236
• /
• 2017

With cloud storage services, users can handle an enormous amount of data in an efficient manner. However, due to the widespread popularization of cloud storage, users have raised concerns about the integrity of outsourced data, since they no longer possess the data locally. To address these concerns, many auditing schemes have been proposed that allow users to check the integrity of their outsourced data without retrieving it in full. Yuan and Yu proposed a public auditing scheme with a deduplication property where the cloud server does not store the duplicated data between users. In this paper, we analyze the weakness of the Yuan and Yu's scheme as well as present modifications which could improve the security of the scheme. We also define two types of adversaries and prove that our proposed scheme is secure against these adversaries under formal security models.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.37
• /
• pp.117-125
• /
• 1996

The objective of this study is to select reward measure of improved business results. Ga-in sharing is defined as a compensation system that is designed In provide for variable compensation and to support an employee involvement process by rewarding the members of a group or organization for improvements in organizational performance. Gains, as measured by a predetermined formula, are shared with all eligible employees, typically through the payment of cash bonuses. Generally sales, profit value-added, cost reduction portion and otherthings have been used as gains, otherwise improved business results, without any proof which is correlated to productivity improvement. This paper suggests which business result is fit reward measure for each business types and sizes.