• 대한방사선기술학회지:방사선기술과학
• /
• 제19권2호
• /
• pp.59-65
• /
• 1996

We studied exposure techniques and exposure dose for simple abdomen A-P projection for 41 medical facilities that are located in Seoul area. 1. The range of tube voltage used was 60 to 84 kVp, the average tube voltage used was 74 kVp 2. Only 17% of added filter was used. 3. Tube current mostly used was 200 mA, some of them used 400 mA. 4. The grid ratio mostly was used 10 : 1, 54 % of the rare earth screen was used in most facilities. 5. The average skin entrance dose was 4.15 mSv and the dose range was 1.05 mSv to 11.0 mSv.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1804_1805
• /
• 2009

최근 여러 산업 분야에서는 품질의 향상과 생산성을 높이기 위해 자동화 검사 장치 개발이 활발하게 연구 되고 있다. 본 연구에서는 비전을 이용한 신뢰도 높은 슬라브(Slab) 표면 검사 자동화 알고리즘의 전처리 단계인 오실레이션 마크(Oscillation mark) 검출을 목표로 한다. 슬라브 영상의 경우 조업시에 발생하는 산화 물질인 스케일(Scale)이 영상 전체에 분포하고 있으며, 이러한 스케일은 형태적 특징 및 밝기 특징이 일정치 않기 때문에 오실레이션 마크 검출 성능을 저하 시킨다. 따라서 스케일의 영향을 최소화 하고 효과적으로 오실레이션 마크를 검출하기 위해 가버 필터(Gabor filter)와 수직 투영 프로파일(Vertical projection profile)을 이용한 노이즈 제거 방법을 사용한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.864-869
• /
• 1993

This paper presents the problem of automatically recognizing embossed or molded characters which are raised from the side wall on rubber tire. In the tire image objects have approximately the same gray-value as the background and because of the tire geometry, illumination of the surface is nonhomogenous. Therefore it is difficult to recognize the raised tire character. In this paper, for describing the process of processing three steps have been proposed: 1) MIN & MAX smoothing operation filter, 2) edge detection algorithm using modified laplacian operator, 3) noise rejection. Afterwards, segmentation is done to attain characters from tire image by projection method. The recognition of the characters in the segmented image is carried out by using multilayered neural network, which is insensitive to the noise.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.70-72
• /
• 2009

In this paper, nonlinear active noise control(ANC) of a 3rd-order Volterra system, which is robust to background noise variation, is proposed along with a variable step-size Gauss-Seidel pseudo affine projection(VSSGS-PAP) algorithm. Simulation results demonstrate that the proposed approach yields better nonlinear ANC performance in a background noise variation environment, compared with the conventional methods for the nonlinear ANC.

• 한국컴퓨터정보학회논문지
• /
• 제22권11호
• /
• pp.25-30
• /
• 2017

In this paper, We proposed an effective demosaicking method for single chip RGB-NIR sensors to recover RGB and NIR images. As the method operates in the spatial frequency domain, the frequency domain characteristics of the sampled CFA data are investigated. Using the luminance signal in the frequency domain and the chrominance signals are processed separately with different filters. The simulated images using the real images are compared with other state-of-art methods. As a result, the proposed demosaicking method resulted an effective calculation by a single processing which the existing alternating projection method requires repeated calculation.

• 한국음향학회지
• /
• 제17권8호
• /
• pp.25-33
• /
• 1998

본 논문에서는 한 쌍의 센서를 이용하여 미지의 수중 음향 신호의 시간지연의 차 (Time Delay Difference)를 추정하고 탐지하는 알고리즘을 다루고 있다. 전형적인 시간지연 차의 최적화 추정 기법은 두 신호의 상관관계(Cross Correlation)에 의한 ML(Maximum likelihood)추정으로 구할 수 있지만, 실제 수중 음향 환경 하에서 시간 지연뿐만 아니라 표 적의 이동에 의하여 발생하는 도플러 효과로 신호의 주파수도 변하게 된다. 이러한 신호 주 파수의 올바른 고려 없이 단순히 두 신호의 시간지연만을 추정하는 방법은 불가피한 에러를 생성하게 된다. 본 논문에서는 시시각각 변하는 시간지연의 차를 구하기 위한 준 최적화 기 법인 확률분포 함수의 Recursive Filter에 시간 지연 차와 도플러효과의 2차원 확률분포 함 수를 적용한 추정 알고리즘을 제안한다. 관측된 신호의 리샘플링(Resampling)을 통하여 도 플러 효과를 보상한 후 2차원 Conditional likelihood를 구하고 Projection과 Correction 과정 을 통하여 시간지연과 도플러 효과에 대한 사후확률을 구한다. 그리고 이러한 알고리즘을 가상 시나리오에 대한 모의실험을 통하여 평가한다.

• 한국광학회지
• /
• 제1권2호
• /
• pp.130-134
• /
• 1990

본 논문에서는 클래스 판별(interclass discrimination) 광패턴 인식을 위해 pSDF(projection synthetic discriminant function)를 기반으로 한 이미지를 구현하고, 비선형 상관기인 이진결합변환 상관기를 이용하였다. 비선형 상관기의 공간 주파수 영역에서 이진위상필터(binary phase only filter) 합성법을 도입하여 실시간 입력이 가능한 액정 표시 소자(liquid crystal device)를 사용하였다. 광패턴 인식 실험결과, 두 클래스간의 상관 첨두치 세기가 2배 차이가 나서 판별 능력이 우수함을 알 수 있었다.

• Current Optics and Photonics
• /
• 제5권5호
• /
• pp.562-575
• /
• 2021

As a new type of spectrometer, that based on filters with different transmittance features attracts a lot of attention for its advantages such as small-size, low cost, and simple optical structure. It uses post-processing algorithms to achieve target spectrum reconstruction; therefore, the performance of the spectrometer is severely affected by noise. The influence of noise on the spectral reconstruction results is studied in this paper, and suggestions for solving the spectral reconstruction problem under noisy conditions are given. We first list different spectral reconstruction methods, and through simulations demonstrate that these methods show unsatisfactory performance under noisy conditions. Then we propose to apply the gradient projection for sparse reconstruction (GRSR) algorithm to the spectral reconstruction method. Simulation results show that the proposed method can significantly reduce the influence of noise on the spectral reconstruction process. Meanwhile, the accuracy of the spectral reconstruction results is dramatically improved. Therefore, the practicality of the filter-based spectrometer will be enhanced.

• International journal of advanced smart convergence
• /
• 제8권1호
• /
• pp.18-23
• /
• 2019

The image projected onto the screen of the floating hologram is no more than a two-dimensional image. Although it creates an illusion that an object appears to float in space as it moves around while showing its different parts. This paper has proposed a novel method of floating 3D hologram display to view stereoscopic three-dimensional images without putting on glasses. The system is comprised of a sharkstooth scrim screen, projector, polarizing filter for the projector, and a polarizing film to block the image projected from the sham screen. As part of the polarization characteristics, the background image and the front object have completely been separated from each other with the stereoscopic 3D effect successfully implemented by the binocular disparity caused by the distance between the two screens.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.228-230
• /
• 2002

The relative electron density resolution was discussed by the noise power spectrum (NPS) in the heavy ion CT image. The heavy ion beam $\^$12/C accelerated up to 400MeV/u by RIMAC was used in this study. The two-dimensional (2-D) NPS in the CT image was obtained from the one-dimensional (1-D) NPS of the measured residual range distribution of water phantom for single projection, and the noise variance in the CT image was calculated from 2-D NPS. The technique used in the reconstruction was the filtered back-projection method with Shepp-Logan filter. The calculated value suggests the result of our previous works using the density resolution phantom, assuming that the relative electron density resolution is twice the standard deviation. Therefore, the estimation of the noise in CT images by 2-D NPS obtained the measured residual range distribution is the useful method.