• 한국농림기상학회지
• /
• 제10권4호
• /
• pp.121-131
• /
• 2008

본 연구에서는 국가표준 시나리오 A1B와 A2 조건에서 예상되는 2071-2100 평년의 최저기온 예상도와, 휴면심도로부터 추정한 단기내동성 분포도에 근거하여, 남한 전역에 대해 사방 270m 간격으로 경관규모의 국지적인 동해위험 정도를 분석함으로써 현재 평년(1971-2000)에 비해 어떤 결과를 보일지 예측하고자 하였다. 실험에 필요한 270m 해상도의 일별 기온자료와 1월 최저기온자료는 농림수산식품부의 전자기후도 및 그 파생산물, 그리고 국립기상연구소의 기후시나리오자료를 이용하여 준비하였다. 대상작물로서 'Campbell Early' 포도를 선정하고 현재와 미래 평년에 대해 각각 휴면심도를 계산하여 비교한 결과, 단기내동성 유지면적(휴면심도 -150 이하)과 저온내습지역($-15^{\circ}$ 이하)은 두 가지 시나리오 모두 미래기후 조건에서 동시에 줄어들었다. 기온과 휴면심도 두 요인을 종합해 분석해보면 현재 평년에 비해 100년 후 미래 평년에 동해위험이 감소하는 지역은 증가하는 지역보다 더 늘어나므로 포도재배에 있어서 저온피해의 위협은 감소할 것이다. 하지만 피해율 30% 이하의 월동 안전지역의 면적이 현재 평년의 59%에서 미래에는 55% (A1B)${\sim}$63% (A2)로서 뚜렷이 증가하지 않으며, 피해율 70% 이상의 월동 위험지역의 면적은 오히려 현재 평년의 13%에서 미래에는 23% (A1B)${\sim}$25% (A2)로 크게 증가할 것으로 예측되었다. 본 연구에서 사용된 전자기후도에 근거한 동해위험도 분석기술은 국내 주요 과수품종에 적용할 수 있으므로 재배적지의 재배치 등 기후변화대과 수산업분야 적응전략 마련에 유용하게 쓰일 수 있을 것이다.

• Geomechanics and Engineering
• /
• 제10권4호
• /
• pp.547-563
• /
• 2016

This paper describes a geotechnical field investigation in Giresun hazelnut licenced warehause and spot exchange during twelve months to determine the soil profile and static project applicability. It is also aimed to determine the superstructure loads and evaluate the relevance of foundation filling materials of the main, laboratory, package and admin buildings. The main building has $88.50{\times}63.20(5593.2)m^2$ site area. It has a big raft foundation. Eleven geotechnical reports were prepared between 2 December 2014 and 25 May 2015. Maximum settlements and safe bearing capacities were calculated to decide to be able to proceed to the next step. Also, the detail observations and evaluations were presented from October 2014 to December 2014. It has been seen that the foundation is designed as a single foundation one. But, in the light of observations, it has been evaluated that the foundation project for package building is not adequate, and after these excavations it must be revised as a raft foundation. The thickness of foundation and structural details should be defined/drawn after analyzing the details by using a special software. Construction joints should be designed between different buildings interfaces to avoid damages and cracks with in different settlements. The environmental drainage must be projected and applied to avoid the probable damage of surface waters on foundations.

• 복식문화연구
• /
• 제20권6호
• /
• pp.923-936
• /
• 2012

Apparel companies define their target customers to integrate consumers' needs into their product development processes. The sizing standards play a significant role in ready-to-wear garment business. Consumers' body build and sizes are different according to gender, age, and body type. The consumers' morphological feature of the one geographical area has changed with immigration, aging, and lifestyle change. In this study the way of defining body types in the standard garment sizing systems published in USA., UK, Germany, Japan, and Korea were compared. The results of this study show that most of the systems classified the body types by the index value. The chest-waist drop value was used for men's body type classification. Women's body types were defined by hip proportion. The hip-bust drop value was used for it. German and European garment sizing systems provide a wide range of men's body types. US men's garment sizes are developed for very conservative body type. US women's garment sizing system has had clearly defined women's body types. The Misses body types projected in the US garment sizing system had changed as women's waist girth got bigger compared to the past. In 2011 the US Misses sizes were divided into Curvy Misses size and Straight Misses size by the hip-waist drop value. The Curvy Misses sizes have smaller waist girth and larger hip girth than the Straight Misses sizes.

• 한국수소및신에너지학회논문집
• /
• 제25권6호
• /
• pp.643-647
• /
• 2014

Two types of fuel supply method ar used in CNG vehicles. One is premixed ignition and the other is gas-jet ignition. In premixed ignition, the fuel is introduced with intake air so that homogeneous air-fuel mixture may form. The ignitability of this method depends on the global equivalence ratio. In gas-jet ignition, CNG is introduced directly into the engine combustion chamber. The overall mixture is stratified by retarded fuel injection. In this study, a visualization technique was employed to obtain fundamental properties regarding overall mixture formation of direct injected CNG fuel inside a constant volume chamber. Jet angles, penetrations and projected jet area with respect to ambient pressure are investigated. The penetration decreases apparently and the time reaching the CVC wall was delayed as the chamber pressure increases. This is caused by the higher inertia of the fluid elements that the injected fluid must accelerate and push aside. It is same to liquid fuel such as diesel and gasoline, but this phenomenon is far more prominent for the gaseous fuel.

• 대한방사선기술학회지:방사선기술과학
• /
• 제2권1호
• /
• pp.59-69
• /
• 1979

For the clearer visualization of the lung apices in the routine chest P-A view, we have analysed the films at the different positions and different directions of the central X-ray beams. The brief results are as the follows. 1. Best visualization of the lung apices are made with the following position of the patient and central ray. Central ray is directed to the median sagittal plane at the level of the 5th thoracic vertebra with the palms of the hands placing at the greater trochanteric area of the both femurs. 2. The position of the sterno-clavicular joint shows no alteration between the radiographs with the central beam to the film center and to the 5th thoracic vertebra, and position of the hands at the greater trochanters or iliac crests. 3. No relationship exists between the center of the film and the position of the hand. The central beam is projected more inferiorly when the beam is centered to the film center than to the 5th thoracic vertebra. 4. The scapulae are rotated sufficiently anteriorly and more inferiorly, with placing the palms at the greater trochanters, directing central ray to the 5th thoracic vertebra, and with close contact the lung apices to the cassette.

• 한국환경복원기술학회지
• /
• 제9권6호
• /
• pp.162-167
• /
• 2006

The urban stream includes the channel and sandbars. The sandbar plays a key role in the riparian ecosystem. For birds and insects the sandbar offers a small strip of habitat and fish and other fauna feed in the boundary of sandbar where eddies occur. So, it is important habitat and source for the flow of energy, matter and organisms through the landscape and act as ecotone between the terrestrial and stream corridors. However, the sandbar changes continuously by the natural process. Thus, it is necessary to measure the shape and area of the sandbar accurately for the efficient urban stream management for the amenity of urban residents and stream protection. The study site is Yangjae Stream where the first natural-style urban stream restoration projected was impelemented by the support of Ministry of Education in Korea. The measurement was taken by the beacon Differential Global Positioning System (DGPS) and the data were stored and analyzed using ArcView Geographic Information System (GIS) program. Therefore, the purpose of this study is to measure the change of sandbars in the urban stream after concentrated stormwater during summer.

• 펄프종이기술
• /
• 제41권4호
• /
• pp.25-32
• /
• 2009

Forest biomass can be used as various types of raw materials such as pulp, wood pellets, solid charcoals and so on. This paper estimates the nation wide amount of forest biomass based on the projection of forest areas for its effective and economic use. Several trend equations are used in projecting the forest areas. In 2009, the forest biomass arising from thinning is estimated be 6,591,575 $m^3$. The estimates of forest biomass in 2015 and 2018 are 6,375,627 $m^3$ and 6,284,779 $m^3$, respectively. Since the forest areas are projected to be declining, the biomass generated by thinning will decrease. This implies that the new alternatives for supplying raw materials for biofuels must be prepared before then.

• 수산해양기술연구
• /
• 제45권1호
• /
• pp.34-45
• /
• 2009

In this study, the hydrodynamic coefficients were measured using various nettings to analyze the change of drag coefficients and lift coefficients as a basic study for deriving hydrodynamic coefficients. The data on hydrodynamic force obtained from the flume tank tests were used to compare and analyze the hydrodynamic coefficients based on Reynolds number. Standardized hydrodynamic coefficients were then assumed during the analysis procedures. The hydrodynamic coefficients were measured using the 9 kinds of nettings in which had the same total projected area with different diameters and mesh-grouping ratio. These different netting systems : mesh-grouping ratio. The results of the test of nettings were as follows; First, the drag coefficients of nettings increased when the higher attack angles applied, and decreased with the increased flow speed and netting twine diameter. Second, the lift coefficients of nettings showed the increased values until the attack angle 30 degree, but decreased for the attack angle over 40 degree. Third, the hydrodynamic coefficients of netting decreased as the Reynolds number increased, and reach at slightly states in the highest numbers. Fourth, the hydrodynamic coefficients were derived from a functional formula considering attack angles and Reynolds number, and presented in the three dimensional space.

• 한국음향학회지
• /
• 제19권6호
• /
• pp.10-16
• /
• 2000

휴대용 방광 용적 측정시스템을 위한 새로운 추정 알고리듬을 제안하였다. 먼저 주어진 화상 데이터로부터 방광벽과 소변의 경계 끝점을 추출하고, 이로부터 축의 길이를 계산한 후 필터링하여 단면을 얻는다. 방광의 모양의 불규칙성을 고려하여 종단면과 횡단면 두 개의 데이터로부터 단면을 얻은 후 종단면으로 면적을 구하고 이를 횡단면에 적용하여 부피를 계산한다. 반대의 과정을 거쳐 또 하나의 부피 추정치를 얻고 이를 평균하여 실제 부피를 추정하였다. 제안된 알고리듬과 기존의 추정방법을 비교한 결과 제안된 방법에서 좋은 결과를 얻었다.

• 한국대기환경학회지
• /
• 제15권5호
• /
• pp.599-611
• /
• 1999

Now that the plume of point source was suspected to have strong impact on visibility impairment in Pusan, we evaluated visibility impairment impact of the pulme from Pusan Thermo Electric Power Plant in Pusan. Level-1 and-2 analyses were carried out using VISCREEN(Visual Impact Screen model). The emission rates for this Pusan Thermo Electric Power Plant was projected to be 116g/s of nitrogen oxides(as $NO_2$). The source fails the level-1 test with a Plume perceptibility(ΔE) of 30, nearly 15 times the screeing threshold. To characterize worstcase meteorological conditions for level-2 screening, we obtained meteorological data from Mar., 1996 to Feb., 1997 of Pusan Thermo Electric Power Plant. The source fails the level-2 test with a ΔE of 17, nearly 8.5 times the screening threshold. These analyses indicated that adverse visibility impairment could not be ruled out. Therefore a Level-3 analysis was performed using PLUVUE II(Plume Visibility model). As a result, maximum reduction of visual range for 0900LST in winter was 0.9%. Visual impact of the plume from vast point source was judged to be considerable in terms of background visibility of urban area.