• Journal of Soil and Groundwater Environment
• /
• v.23 no.1
• /
• pp.92-105
• /
• 2018

In this study, the projected land use area in 2030 for major crop production was estimated in Jeju Island using land cover map, and corresponding agricultural water demand for 40 sub-regions was quantitatively assessed using the future climate change scenario (RCP 4.5). Estimated basic unit of water demand in 2030 was the highest in the western region, and the lowest in the eastern region. Monthly maximum agricultural water demand analysis revealed that water demand in August of 2030 substantially increased, suggesting the climate of Jeju Island is changing to a subtropical climate in 2030. Agricultural water demand for sub-region in 2030 was calculated by multiplying the target area of the water supply excluding the area not in use in winter season by the basic unit of water demand, and the maximum and minimum values were estimated to be $306,626m^3/day$ at Seogwipo downtown region and $77,967m^3/day$ at Hallim region, respectively. Consequently, total agricultural water demand in Jeju Island in 2030 was estimated to be $1,848,010m^3/day$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_1
• /
• pp.507-516
• /
• 2007

Segmentation and organization of the LiDAR (Light Detection and Ranging) data of the Earth's surface are difficult tasks because the captured LiDAR data are composed of irregularly distributed point clouds with lack of semantic information. The reason for this difficulty in processing LiDAR data is that the data provide huge amount of the spatial coordinates without topological and/or relational information among the points. This study introduces LiDAR data segmentation technique by utilizing histograms of the LiDAR height image data and analyzing roof shape for 3D reconstruction and visualization of the buildings. One of the advantages in utilizing LiDAR height image data is no registration required because the LiDAR data are geo-referenced and ortho-projected data. In consequence, measurements on the image provide absolute reference coordinates. The LiDAR image allows measurement of the initial building boundaries to estimate locations of the side walls and to form the planar surfaces which represent approximate building footprints. LiDAR points close to each side wall were grouped together then the least-square planar surface fitting with the segmented point clouds was performed to determine precise location of each wall of an building. Finally, roof shape analysis was performed by accumulated slopes along the profiles of the roof top. However, simulated LiDAR data were used for analyzing roof shape because buildings with various shapes of the roof do not exist in the test area. The proposed approach has been tested on the heavily built-up urban residential area. 3D digital vector map produced by digitizing complied aerial photographs was used to evaluate accuracy of the results. Experimental results show efficiency of the proposed methodology for 3D building reconstruction and large scale digital mapping especially for the urban area.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.2
• /
• pp.343-363
• /
• 2017

The objective of this work was finding out the most advisable testing conditions for an effective and robust characterization of the tensile strength (TS) of concrete disks. The independent variables were the loading geometry, the angle subtended by the contact area, disk diameter and thickness, maximum aggregate size, and the sample compression strength (CS). The effect of the independent variables was studied in a three groups of experiments using a factorial design with two levels and four factors. The likeliest location where failure beginning was calculated using the equations that account for the stress-strain field developed within the disk. The theoretical outcome shows that for failure beginning at the geometric center of the sample, it is necessary for the contact angle in the loading setup to be larger than or equal to a threshold value. Nevertheless, the measured indirect tensile strength must be adjusted to get a close estimate of the uniaxial TS of the material. The correction depends on the loading geometry, and we got their mathematical expression and cross-validated them with the reported in the literature. The experimental results show that a loading geometry with a curved contact area, uniform load distribution over the contact area, loads projected parallel to one another within the disk, and a contact angle bigger of $12^{\circ}$ is the most advisable and robust setup for implementation of BT on concrete disks. This work provides a description of the BT carries on concrete disks and put forward a characterization technique to study costly samples of cement based material that have been enabled to display new and improved properties with nanomaterials.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.5
• /
• pp.69-80
• /
• 2018

This study investigated climate change influences over crop water requirement (CWR) and irrigation water requirement (IWR) of the wheat-rice cropping system of Upper Chenab Canal (UCC) command in Punjab Province, Pakistan. PRECIS simulated delta-change climate projections under the A1B scenario were used to project future climate during two-time slices: 2030s (2021-2050) and 2060s (2051-2080) against baseline climatology (1980-2010). CROPWAT model was used to simulate future CWRs and IWRs of the crops. Projections suggested that future climate of the study area would be much hotter than the baseline period with minor rainfall increments. The probable temperature rise increased CWRs and IWRs for both the crops. Wheat CWR was more sensitive to climate-induced temperature variations than rice. However, projected winter/wheat seasonal rainfall increments were satisfactorily higher to compensate for the elevated wheat CWRs; but predicted increments in summer/rice seasonal rainfalls were not enough to complement change rate of the rice CWRs. Thus, predicted wheat IWRs displayed a marginal and rice IWRs displayed a substantial rise. This suggested that future wheat production might withstand the climatic influences by end of the 2030s, but would not sustain the 2060s climatic conditions; whereas, the rice might not be able to bear the future climate-change impacts even by end of the 2030s. In conclusion, the temperature during the winter season and rainfall during the summer season were important climate variables controlling water requirements and crop production in the study area.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1070-1075
• /
• 2013

In this research, we describe a security robot system and ongoing research results to control human's wrong direction in order to forbid human to enter security zone. Proposed robot system surveils a security area with equipped laserscanner sensor usually. When it detect walking human who is for the area, robot calculates his velocity vector, plans own path to forestall and interrupts him who want to head restricted area and starts to move along the estimated trajectory. The walking human is assumed to be a point-object and projected onto an scanning plane to form a geometrical constraint equation that provides position data of the human based on the kinematics of the mobile robot. While moving the robot continues these processes for adapting change of situation. After arriving at an opposite position human's walking direction, the robot advises him not to be headed more and change his course. The experimental results of estimating and tracking of the human in the wrong direction with the mobile robot are presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.67-73
• /
• 2005

The paper presents a single-heater microfluid injector, whose ejected droplet volume is adjusted by digital current path control for a single microheater. The previous droplet volume adjustable methods have used the digital current control for multiple heaters or the analog current control for a single heater, while the present method uses the digital current control for a single microheater. Two different microinjectors, having a rectangular heater and a circular hearter, are designed and fabricated in the chip area of $7.64\;mm{\times}5.26\;mm$. The fabricated microinjectors have been tested and characterized for the number, size, shape and lifetime of the generated bubbles as well as for the volume and velocity of the ejected droplets. The input power for the rectangular heater and the circular heater has been varied in the ranges of $8.7{\sim}24.9{\mu}W\;and\;8.1{\sim}43.8{\mu}W$, respectively. The projected area of the generated bubble has been changed in the ranges of $440{\sim}l,3600{\mu}m^2\;and\;800{\sim}3,300{\mu}m^2$ for the rectangular heater and the circular heater, respectively. The microinjector with the rectangular heater ejects three discrete levels of the droplet in the volume range of $9.4{\sim}20.7pl$ with the velocity range of $0.8{\sim}1.7m/s$, while the microinjector with the circular heater achieves five discrete levels of the droplet in the volume range of $7.4{\sim}27.4pl$ with the velocity range of $0.5{\sim}2.8m/s$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.3
• /
• pp.149-163
• /
• 1976

In Korea, the ever-increasing population has become a serious problem and the decreasing of cultivated lard area per person has become a major concern. Therefore, today we are implementing a green revolution using miracle varieties which require more fertilizer. The increased use of fertilizer along with development and adoption of high yielding varieties is the key to carrying out this green revolution. Fertilizer consumption in Korea is mainly influenced by agricultural techniques, fertilizer prices and government policies for increasing food production. If there are no special change, such as a cataclysm or an exhaustion of resources, it is quite clear that the fertilizer demand will increase to the near maximum ceiling point of optimum levels for crops in the year 2000. Fertilizer demand is not the amount of fertilizer that will be used by the farmer, but the actual optimum amount of plant nutrients required for maximum production. In this report, two alternative strategies are consideded in forecasting the future feitilizer demands. Alternative I is projected by reviewing consumption amounts over the last 10 years (1966~75) in Korea. The annual rate of increase in fertilizer consumption for the last 10 years was approximately 8.7% (table 1). Plant nutrient consumption rates in later years have been more balanced, and also fertilizer consumption per total acreage is considerably higher in Korea than in other countries (table 11), consequently the rate of increase in the future is expected to decline. Looking at the long term projections, the average annual rate of increase is expected to be 7% for 1976~80, 2.5% for 1981~90, 1.5% for 1991~2000. Thus, total projected fertilizer demands are estimated at 1,208,000M/T by 1980, 1,547,000M/T by 1990, 1,795,000M/T by 2000 (table 16). Alternative II is based on projected optimum fertilizer levels for crops and on increased crop acreage. The government recommended fertilizer rate has increased by a factor of 0.99 to 5.49 over the past twelve years depending on the specific crops (table 4). Levels of fertilizer demand recommended by government (table 7) in 1976 are still low compared with actual optimum fertilizer demands for crops (table 5). Therefore, future incaeases in fertilizer usage are anticipated. Thus, total projected fertilizer demands are estimated at 1,229,000M/T by 1980, 1,493,000M/T by 1990 and 1,898,000M/T by 2000(table 16).

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.267-267
• /
• 2017

In Korea, the average air temperature has been elevated twice faster than the average global warming. And the climate warming is characterized by the smaller rise of air temperature in summer and the greater rise of air temperature in spring and winter. Therefore, the number of frost-free days to determine the cultivation ability of crops has increased by more than 15 days in 10 years according to climate warming. This climate warming trend has extended and is projected to extend not only the sweet potato growing season but also the sweet potato early cultivating area to higher altitude and latitude region. This study was carried out to evaluate the possibility of sweet potato double cropping in the southern island area of Korea by assessing the growth and yield performance of sweet potato cultivated at extremely-early and -late time. We had performed at Yokji Island Yokji Island($E128^{\circ}$ 18' $N34^{\circ}$ 36'), a representative specified complex area of sweet potato cultivation in southern Korea. As the test varieties, the major cultivars of the this region, Shinyulmi and early hypertrophic cultivars, Dahomi were used. The prior cropping were planted with PE film mulching on March 30 and April 10, and harvested after 110 days. So the succeeding cropping were planted without PE film mulching on July 25 and August 5 according to the harvesting time of the prior sweet potato and harvested after 120 days. As a control, it was harvested on September 15, 120 days after planted on May 15. Each experimental plot had an area of 12 square meters consisting of 4 beds, and was planted one at a time at intervals of 25cm. We had investigated growth characteristics - main vine length, node number, branch number, total vine yield, and tuberous root characteristics - tuberous root number, average weight, starch value, and etc. After harvesting, we analyzed the economic effects by examining the postharvest quantity, the input labor, the management cost, and the income. The total yield of marketable products in prior and succeeding cropping was 46~70% higher than that of control. The average unit price of sweet potato was 36% higher than the conventional culture, and the gross income increased by 98%, but the operating cost increased by 83%, and the farm income increased by 103%. There are considerations such as the difficulty of enlargement of cultivation area due to lack of labor in limited space and the need for watering measures due to spring drought. However, if the area of application for sweet potatoes double system is increased by 10%, it can be used as a new cropping system.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.280-280
• /
• 2017

In Korea, the average air temperature has been elevated twice faster than the average global warming. And the climate warming is characterized by the smaller rise of air temperature in summer and the greater rise of air temperature in spring and winter. Therefore, the number of frost-free days to determine the cultivation ability of crops has increased by more than 15 days in 10 years according to climate warming. This climate warming trend has extended and is projected to extend not only the sweet potato growing season but also the sweet potato early cultivating area to higher altitude and latitude region. This study was carried out to evaluate the possibility of sweet potato double cropping in the southern island area of Korea by assessing the growth and yield performance of sweet potato cultivated at extremely-early and -late time. We had performed at Yokji Island Yokji Island($E128^{\circ}$ 18' $N34^{\circ}$ 36'), a representative specified complex area of sweet potato cultivation in southern Korea. As the test varieties, the major cultivars of the this region, Shinyulmi and early hypertrophic cultivars, Dahomi were used. The prior cropping were planted with PE film mulching on March 30 and April 10, and harvested after 110 days. So the succeeding cropping were planted without PE film mulching on July 25 and August 5 according to the harvesting time of the prior sweet potato and harvested after 120 days. As a control, it was harvested on September 15, 120 days after planted on May 15. Each experimental plot had an area of 12 square meters consisting of 4 beds, and was planted one at a time at intervals of 25cm. We had investigated growth characteristics - main vine length, node number, branch number, total vine yield, and tuberous root characteristics - tuberous root number, average weight, starch value, and etc. After harvesting, we analyzed the economic effects by examining the postharvest quantity, the input labor, the management cost, and the income. The total yield of marketable products in prior and succeeding cropping was 46~70% higher than that of control. The average unit price of sweet potato was 36% higher than the conventional culture, and the gross income increased by 98%, but the operating cost increased by 83%, and the farm income increased by 103%. There are considerations such as the difficulty of enlargement of cultivation area due to lack of labor in limited space and the need for watering measures due to spring drought. However, if the area of application for sweet potatoes double system is increased by 10%, it can be used as a new cropping system.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.10-20
• /
• 2019

The purpose of this study is to identify the long-term area changes in the subalpine coniferous forests in Korea in order to understand the changes in the subalpine forest ecosystems vulnerable to climate change. We analyzed 20 years of time-series Landsat satellite images (mid 1990s, mid 2010s) for change detection of coniferous forests and compared with the long term changes of climate information to identify their relationship in the study area. As a result, the area of coniferous forests in the study region decreased by 25% over 20 years. The regions with largest changes are Seoraksan, Baegunsan-Hambaeksan-Jangsan, Jirisan, and Hallasan. The region with the largest decrease in area was Baegunsan (reduced area: 542 ha), and the region with large decrease in area and the largest rate of decrease was Hallasan (rate of decrease: 33.3%). As the Jeju region has the most rapid temperature rise, it is projected that Hallasan is the most vulnerable forest ecosystem affected by climate change. The result of this study shows that from a long-term perspective the overall coniferous forests in the subalpine region are declining, but the trend varies in each region. This national and long-term information on the change of coniferous forests in the subalpine region can be utilized as baseline data for the detailed survey of endangered subalpine coniferous trees in the future.