• 한국추진공학회지
• /
• 제20권1호
• /
• pp.37-42
• /
• 2016

본 연구에서는 HTPB를 적용한 고체추진제의 공정간 검사를 위해 경화제를 넣기 전과 넣은 후의 미 경화 추진제의 연소속도를 검토하였다. 그리고 경화제를 넣기 전 미 경화 추진제의 연소속도는 압력 1000 psi에서 약 9.7 mm/s 정도이며, 시간에 따른 연소속도 변화는 없었다. 경화제가 들어간 미 경화 추진제의 연소속도는 약 8.1 mm/s로 시간에 따라 느려지는 경향을 보였다. 경화반응 속도가 느린 미 경화 추진제는 시간에 따라 연소속도가 서서히 느려졌으며, 경화반응 속도가 빠른 미 경화 추진제는 연소속도가 빠르게 느려지는 것을 확인할 수 있었다. 그리고 완전히 경화된 추진제의 연소속도는 약 6.8 mm/s 정도로 가장 느린 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.360-361
• /
• 2005

Rapid progress in IC fabrication technology has strong demand in polishing of silicon wafer to meet the tight specification of nanotopography and surface roughness. One of the important issues in Si CMP is the stabilization of polishing pad. If a polishing pad is not stabilized before main Si wafer polishing process, good polishing result can not be expected. Therefore, new pad must be subjected into break-in process using dummy wafers for a certain period of time to enhance its performance. After the break-in process, the main Si wafer polishing process must be performed. In this study, the characteristics of break-in process were investigated in Si wafer polishing. Viscoelastic behavior, temperature variation of pad and friction were measured to evaluate the break-in phenomenon. Also, it is found that the characteristic of the break-in seems to be related to viscoelastic behavior of pad.

• 청정기술
• /
• 제14권3호
• /
• pp.193-203
• /
• 2008

피혁 제조 공정에서 계면활성제는 세정목적, 분산성 그리고 고착성 등을 부여하기 위해 사용되고 있다. 그러나 기존의 피혁 공정에서 사용되고 있는 계면활성제는 친수성기가 다량 포함되어 있어 향후 피혁 시장에서 요구될 것으로 기대되는 내오염성, 내수성, 내구성 통의 고기능성 특성을 재현하는데 문제점이 있다. 본 연구에서는 기존의 탄화수소 계열의 계면활성제의 문제점을 보완하기 위해서, 탄소-불소의 강한 결합에너지로 인한 표면장력 감소, 분산력 증대, 세정효과, 크롬 흡착력 증대 등의 특성을 나타내는 불소계 계면활성제를 제조하였다. 불소계 계면활성제의 사용으로 피혁 제조 공정의 분산성 증대, 침투력 상승 및 결합력을 향상시켜 크롬 흡착률 증가, 탄닝 폐수 배액의 크롬 함량 감소, 생물학적 산소 요구량, 화학적 산소 요구량의 함량 감소 및 물리적 특성이 향상되는 것을 확인하였다.

• 공학교육연구
• /
• 제26권6호
• /
• pp.19-29
• /
• 2023

This study aims to develop and apply a metaverse-based instructional design model for the education in science and technology. It analyzed the concept and characteristics of metaverse, existing non-contact education models, and major teaching strategies systematically. Based on the prior researches, an instructional design model using metaverse is developed that presents metaverse-related teaching strategies and design principles for the before-, during-, and after-lesson phases. Then, this model was applied to a project-based learning program, conducted a perception survey on instructors and learners, and revised the metaverse instructional design model based on the results of the survey. In the Metaverse Instructional Design Model, before-lesson phase is a physical and psychological preparation stage for class participation, which includes familiarization with the Metaverse learning environment, formation of expectations for education, and self-directed pre-learning. During the lesson, to effectively deliver the lesson content, it is necessary to build confidence in the learning environment, promote learning participation, provide reference materials, perform team projects and provide feedback, digest learning content, and transfer learning content. The after-lesson phase provides strategies for ongoing interaction between learners and mentors. This study introduces a new instructional design model that utilizes metaverse and shows the potential of metaverse-based education in science and technology. It also has important implications in that it provides practical guidelines for the effective design and implementation of metaverse-based education.

• 시스템엔지니어링학술지
• /
• 제8권1호
• /
• pp.21-28
• /
• 2012

Development of the system that has required performance is the most important figure and that is the key of project succeed. In order to perform that, systems engineering has come to the fore as a solution. In each step of system engineering process, particularly, requirement analysis and derivation, logical solution, architecture design step are known to affect many of the function and efficiency. Of these, this paper focus on architecture design. We introduce methodology for physical architecture design by applying DSM(Design Structure Matrix) methodology which is based on result of logical solution from MBSE methodology.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권3호
• /
• pp.129-135
• /
• 2016

After the construction of offshore plants, the function and integrity of system in offshore plants should be commissioned. As the executor of many FLNG projects, Samsung Heavy Industries Co., Ltd has faced some challenges for commissioning which are not similar to those in other offshore project. This study shows the differences between the commissioning of typical offshore projects and the one of FLNG projects. By the characteristics of offshore, performing the commissioning activity of FLNG near shipyard as much as possible reduces the risk of malfunction. The possible solutions to achieve these strategies are introduced.

• Industrial Engineering and Management Systems
• /
• 제15권3호
• /
• pp.215-223
• /
• 2016

Design of personnel teams has been studied from diverse perspectives; the most common are the people and systems requirements perspectives. All these point of view are linked, which is the reason why it is necessary to study them simultaneously. Considering this gap, a decision making model is developed based on factors, models, and requirements mentioned in the literature. The model is applied to a real case. The findings indicate that the Personnel Behavior Based Lean model (PBBL) can be converted into a decision making model for the selection of team members. The study is focused not only on the individual candidates' knowledge, skills, and aptitudes, but also on how the model considers the company requirements, conflicts, and the importance of each person to the project.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2028-2030
• /
• 2003

This paper describes the results of reliability prediction analysis of control rod control system, which is being developed as part of KNICS project. The results of reliability prediction indicate MTBF(Mean Time Between Failure) of cards for control rod control system. A purpose of reliability prediction is to evaluate MTBF of cards, identify the design drawbacks of cards, and propose design improvement to a designer to help design the more reliable control rod control system. This reliability prediction analysis used the the part count and part stress method in the basis of MIL-HDBK-217F.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2055-2057
• /
• 2003

This paper describes the results of RBD(Reliability Block Diagram) analysis of control rod control system, which is being developed as part of KNICS project. The results of RBD indicate unavailability of control cabinet for control rod control system. A purpose of RBB is to evaluate unavailability of control cabinet, identify the design drawbacks of control cabinet, and propose design improvement to a designer to help design the more reliable control rod control system. This RBD defines the logical interaction of failure within a system.

• 국제초고층학회논문집
• /
• 제10권3호
• /
• pp.193-201
• /
• 2021

Cheongna City Tower is a 448-meter-high rise observatory tower with 8.7:1 aspect ratio located at central lake park in Incheon Cheongna international city. The tower is a crystal shaped image and it turns invisible when the façade is activated. The tower was planned to be hexagonal 30-story building with two basements which are composed of mega frame structure using mega column and mega brace. In order to minimize the wind effect, the blow-through area was installed so that the wind can pass through. This observatory tower is an unprecedented project since the whole building is covered by façade for invisibility effect.