• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1231-1235
• /
• 2010

The tensile failure behavior of polymer matrix composite materials was investigated with the aid of a nondestructive evaluation (NDE) technique. The materials, E-glass fiber reinforced epoxy matrix composites, which are applicable to carbody materials in railway vehicles to reduce weight, were used for this investigation. In order to explain stress-strain behavior of polymer matrix composite sample, the infrared thermography technique was employed. A high-speed infrared (IR) camera was used for in-situ monitoring of progressive damages of polymer matrix composite samples during tensile testing. In this investigation, the IR thermography technique was used to facilitate a better understanding of damage evolution, fracture mechanism, and failure mode of polymer matrix composite materials during monotonic loadings.

• 지질공학
• /
• 제9권3호
• /
• pp.243-251
• /
• 1999

일반적으로 등방→균질 재료로 취급되고 있는 화강암 내에는 많은 미세 결함들이 존재한다. 암석에서 이들 미세 결함들이 단계적으로 발생, 진전하여 취성파괴가 일어나는 것으로 알려져 있다. 본 논문에서는 새롭게 개발된 시험기를 이용하여 수침삼축압축시험중에 일어나는 미수크랙의 발생, 진전 및 상호작용을 연속적으로 관찰하고, 그 형태를 분류하였다.

• 농업과학연구
• /
• 제35권2호
• /
• pp.213-223
• /
• 2008

The instability of rock slopes caused by heavy rainfall and soil mass sliding needs the preventable and reinforcing method. The most important factor for the stability is the shear strength available in the planar part of the failure surface, which shows that a progressive failure takes place and a reinforcing of rock slope using FRP grout is effectively available. In this study, a grouting bolting interval predictions by limit equilibrium analysis and Matlab mathematical computer codes in several cases is presented for FRP reinforced rock slope. The proposed mathematical computer code can be easily applied for seeking properly FRP grout intervals prior to design and execute a reinforcement of a rock slope in practice.

• Structural Engineering and Mechanics
• /
• 제24권2호
• /
• pp.181-194
• /
• 2006

The masonry is a complex heterogeneous material and its shear deformation and fracture is associated with very complicated progressive failures in masonry structure, and is investigated in this paper using a mesoscopic mechanical modelling, Considering the heterogeneity of masonry material, based on the damage mechanics and elastic-brittle theory, the newly developed Material Failure Process Analysis (MFPA) system was brought out to simulate the cracking process of masonry, which was considered as a three-phase composite of the block phase, the mortar phase and the block-mortar interfaces. The crack propagation processes simulated with this model shows good agreement with those of experimental observations by other researchers. This finding indicates that the shear fracture of masonry observed at the macroscopic level is predominantly caused by tensile damage at the mesoscopic level. Some brittle materials are so weak in tension relative to shear that tensile rather than shear fractures are generated in pure shear loading.

• Interaction and multiscale mechanics
• /
• 제5권2호
• /
• pp.157-168
• /
• 2012

The dilatancy of granular materials has significant influence on its mechanical behaviors. The dilation angle is taken as a constant in conventional associated or non-associated flow rules based on Drucker-Prager yields theory. However, various experimental results show the dilatancy changes during progressive failure of granular materials. A non-associated flow rule with evolution of dilation angle is adopted in this study, and Cosserat continuum theory is used to describe the behaviors of granular materials for considering to some extent the its internal structure. Numerical examples focus on the bearing capacity and localization of granular materials, and results illustrate the capability and performance of the presented model in modeling the effect on failure behavior of granular materials.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4146-4158
• /
• 2023

This paper proposes a combined plastic and creep constitutive model of A533B1 pressure vessel steel to simulate progressive deformation of nuclear pressure vessels under severe accident conditions. To develop the model, recent tensile test data covering a wide range of temperatures (from RT to 1,100 ℃) and strain rates (from 0.001%/s to 1.0%/s) was used. Comparison with experimental data confirms that the proposed combined plastic and creep model can well reflect effects of temperature and strain rate on tensile behaviour up to failure. In the companion paper (Part II), the proposed model will be used to simulate OECD lower head failure (OLHF) test data.

• 한국정밀공학회지
• /
• 제31권12호
• /
• pp.1161-1170
• /
• 2014

Delta sash is an important part of automobile door, which has the functions of supporting and guiding seesaw of car's window, preventing dust and air from outside. In previous manufacturing process, each part of the delta sash was independently formed by tandem processes, and rubber is bonded to steel by poisonous glue. So, the previous processes, including roll forming process and toxic gases, had low production rate and high failure rate. In this study, progressive process design of the delta sash was proposed in order to increase productivity and high utilization of the materials. And instead of the poisonous glue used for adhesion of rubber in the previous tandem process, embossing and piercing processes were designed in the new guide to help the rubber to adhere well to steel. And the optimal piercing distance was designed to ensure structural safety, and prototypes were manufactured for verifying reliability of the processes.

• 한국항공우주학회지
• /
• 제42권11호
• /
• pp.927-936
• /
• 2014

이 논문에서는 복합 적층판의 점진적 파손해석 기법을 개발하고 검증하였다. 강도 및 강성 예측의 정확성을 높이기 위해 재료 비선형 효과와 연속체 손상역학을 동시에 고려하였다. 파손 시작점과 성장을 예측하기 위한 식으로 Hashin의 판별식이 사용되었으며, 파손 모드는 수지인장/전단, 섬유 인장의 2가지 파손모드를 고려하였다. 비선형 탄성 및 점탄성의 구성방정식을 고려한 평형을 계산하기 위해 Newton-Raphson 방법이 사용되었다. 실험을 통해 얻어진 복합재료 단층의 물성을 이용하여 노치가 없는 시편에 인장력을 가했을 때 예상되는 적층복합재의 강도 및 변형률을 예측하였다. 이 경우 선형 물성과 저하계수만을 고려하여 예측된 강성/강도보다 실험결과에 근사하게 나타남을 확인하였다.

• 한국해안·해양공학회논문집
• /
• 제23권3호
• /
• pp.193-204
• /
• 2011

역동적인 파랑에 노출되는 경우 다양한 failure mode를 쉽게 드러내는 Oil boom의 성능을 개선하기 위해 가장 정교한 파랑모형인 spatially filtered Navier-Stokes 식을 LES (Large Eddy Simulation), 잔차응력에 대한 LDS (Lagrangian Dynamic Smagorinsky 모형), SPH (Smoothed Particle Hydrodynamics) 기법을 활용하여 해석하는 새로운 수치모형이 제언되었다. 이어 부유식 Oil Boom의 누유특성을 규명하기 위해 oil spill, progressive wave, oil boom의 상호작용을 oil boom이 계류삭에 고정되어있는 경우와 oil boom의 excursion이 허용된 경우에 대해 각각 수치모의 하였다. 모의결과 oil boom의 skirt 길이가 수심의 30% 이상이고 excursion이 허용된 경우 oil spill의 차폐 기능은 극대화되는 것으로 밝혀졌다. 이와 더불어 y = 1~2 m 사이에 오일막과 해수의 경계층에서 생성된 와류가 저면으로 확산되면서 시계방향과 반 시계방향의 와류가 엇갈리게 생성되는 coherent eddies가 관측되어 수리실험을 통해 그 존재가 알려진 Kelvin-Helmholz파의 성장과정과 계면으로부터의 일탈과정이 수치모의된 것으로 판단된다.

• Composites Research
• /
• 제30권2호
• /
• pp.149-157
• /
• 2017

본 논문에서는 응집영역 모델링 기법을 사용하여 노치가 있는 적층복합재료의 파괴거동을 연구하였다. 먼저 노치가 있는 적층복합재료 시편형상에 대해 일반 3차원 고체요소로 모델링 한 후 요소들 사이에 섬유파괴, 기지파괴 및 층간분리 파괴를 담당하는 응집요소를 삽입하여 유한요소 메쉬를 제작하였다. 다음으로 일축인장 시험을 모사하는 하중 및 경계조건을 가하여 점진적 파괴해석을 수행하고 해석결과를 참고문헌의 실험결과와 비교하여 해석의 타당성을 검증하였다. 수치해석 결과로부터 노치가 있는 적층복합재료 인장시편의 파괴시작 및 진전거동을 분석하였으며 파괴모드의 진전을 체계적으로 조사하였다.