References
- Schaffer, G., "Computer Design of Progressive Dies," American Machinist, Vol. 22, pp. 73-75, 1971.
- Fogg, B. and Jaimeson, B., "The Influencing Factors in Optimizing Press Tool Die Layouts and a Solution using Computer Aids," CIRP Annals, Vol. 24, pp. 429-434, 1975.
- Shibata, Y. and Kunitomo, Y., "Sheet Metal CAD/CAM System," Bull. Jpn. Soc. Precis. Eng., Vol. 15, No. 4, pp. 219-224, 1981.
- Nakahara, S., Kojima, T., Tamura, S., Funimo, A., Choichiro, S., and Mukumuru, T., "Computer Progressive Die Design," Proc. of the 19th MTDR Conference, pp. 171-176, 1978.
- Choi, J. C., Kim, B. M., and Kim, C., "An Automated Process Planning System for Blanking or Piercing of Irregular Shaped Sheet Metal Product with Bending Processes," J. Korean Soc. Precis. Eng., Vol. 15, No. 3, pp. 18-23, 1998.
- Choi, J. C. and Kim, C., "An Automated CAD System of Product with Bending Constraints and Piercing for Progressive Working," J. Korean Soc. Precis. Eng., Vol. 16, No. 11, pp. 174-182, 1998.
- Prasad, Y. K. D. V. and Somasundaram, S., "CANSN-a Heuristic Algorithm for Nesting of Irregular Shaped Sheet-Metal Blanks," Computer-Aided Eng. J., Vol. 8, No. 2, pp. 69-73, 1991. https://doi.org/10.1049/cae.1991.0014
- Sundaram, R. M. and Cheng, T. J., "Micro Computer Based Process Planning using Geometric Programming," Int. J. Prod. Res., Vol. 24, No. 1, pp. 119-127, 1986. https://doi.org/10.1080/00207548608919717
- Duncan, J. L. and Sowerby, R., "Computer Aided in Sheet Metal Engineering," Annals of the CIRP, Vol. 30, No. 2, pp. 541-546, 1981. https://doi.org/10.1016/S0007-8506(07)60164-4
- Kang, K. W., Chang, I. J., and Kim, J. K., "Vibration Fatigue Analysis for Multi-Point Spot-Welded SPCC Structure Considering Change of Dynamic Response," Journal of KSME, Vol. 34, No. 9, pp. 1193-1199, 2010. https://doi.org/10.3795/KSME-A.2010.34.9.1193
- Adamowicz, M. and Albano, A., "Nesting Two-Dimensional Shapes in Rectangular Modules", Computer Aid. Design, Vol. 8, No. 1, pp. 27-33, 1976. https://doi.org/10.1016/0010-4485(76)90006-3
- Choi, J. C., Kim, B. M., Cho, H. Y., and Kim, C., "An Automated Die Design System for Blanking and Piercing of Stator and Rotor Parts," J. Korean Soc. Precis. Eng., Vol. 15, No. 5, pp. 22-33, 1997.
- Sundaram, R. M. and Cheng, T. J., "Microcomputer-Based on Process Planning using Geometric Programming," Int. J. Prod. Res., Vol. 24, No. 1, pp. 119-127, 1986. https://doi.org/10.1080/00207548608919717
- Schaffer, G., "Computer Design of Progressive Dies," Am. Mach., Vol. 22, pp. 73-75, 1971.
- Prasad, Y., and Somasundaram, S., "CADDS: an Automated Die Design System for Sheet-Metal Blanking," Computing & control engineering journal, Vol. 3, No. 3, pp. 185-191, 1992. https://doi.org/10.1049/cce:19920047