• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권4호
• /
• pp.318-330
• /
• 2013

This paper presents a high-linearity low-noise small-size programmable gain amplifier (PGA) based on a new low-noise low-distortion differential amplifier and a proposed reconfiguration technique. The proposed differential amplifier combines an inverter-based differential pair with an adaptive biasing circuit to reduce noise and distortion. The reconfiguration technique saves the chip size by half by utilizing the same differential pair for the input transconductance and load-stage, interchangeably. Fabricated in $0.18-{\mu}m$ CMOS, the proposed PGA shows a dB-linear control range of 21dB in 16 steps from -11 dB to 10 dB with a gain error of less than ${\pm}0.33$ dB, an IIP3 of 7.4~14.5 dBm, a P1dB of -7~1.2 dBm, a noise figure of 13dB, and a 3-dB bandwidth of 270MHz at the maximum gain, respectively. The PGA occupies a chip area of $0.04mm^2$ and consumes only 1.3 mA from the 1.8 V supply.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제35권6호
• /
• pp.389-397
• /
• 2015

Recently, wave propagation imaging based on laser scanning-generated elastic waves has been intensively used for nondestructive inspection. However, the proficiency of the conventional software based system reduces when the scan area is large since the processing time increases significantly due to unavoidable processor multitasking, where computing resources are shared with multiple processes. Hence, the field programmable gate array (FPGA) was introduced for a wave propagation imaging method in order to obtain extreme processing time reduction. An FPGA board was used for the design, implementing post-processing ultrasonic wave propagation imaging (UWPI). The results were compared with the conventional system and considerable improvement was observed, with at least 78% (scanning of $100{\times}100mm^2$ with 0.5 mm interval) to 87.5% (scanning of $200{\times}200mm^2$ with 0.5 mm interval) less processing time, strengthening the claim for the research. This new concept to implement FPGA technology into the UPI system will act as a break-through technology for full-scale automatic inspection.

• Journal of KIISE:Computer Systems and Theory
• /
• 제35권6호
• /
• pp.284-292
• /
• 2008

The density of Memory has been increased by great challenge for memory technology; therefore, elements of memory become more smaller than before and the sensitivity to faults increases. As a result of these changes, memory testing becomes more complex. In addition, as the number of storage elements per chip increases, the test cost becomes more remarkable as the cost per transistor drops. Recent development in system-on-chip(SoC) technology makes it possible to incorporate large embedded memories into a chip. However, it also complicates the test process, since usually the embedded memories cannot be controlled from the external environment. We present a ARM processor-programmable built-in self-test(BIST) scheme suitable for embedded memory testing in the SoC environment. The proposed BIST circuit can be programmed vis an on-chip microprocessor.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
• /
• pp.89-92
• /
• 2001

In this paper, as a study of programmable software radio digital communication, we implemented ASK(Amplitude Shift Keying), FSK(Frequency Shift Keying), and PSK(Phase Shift Keying) modulation using programmable software(algorithm) of DSP(Digital Signal Processor). Moreover, it is possible to select one of those three modulation methods by realizing on single DSP. We adopted Motorola DSP56002 and Crystal CS4215(A/D and D/A converter) for our purpose. The DSP56002 is 24-bit and operates 20 MIPS at 40 MHz, and the CS4215 is 16-bit and supports the maximum 50 kHz sampling frequency.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제20권10호
• /
• pp.74-81
• /
• 2006

This paper proposes the sensorless vector control scheme of a Non-salient permanent-magnet synchronous motor (SPMSM) using programmable low pass filter (PLPF) to estimate a stator flux with the information of a rotor position and speed. The sesorless vector control of PMSM using PLPF can solves the dc drift problem associated with a pure integrator and a LPF. Also, the PLPF has the phase and gain compensator to estimate exactly rotor position and speed. Therefore, the information of a position and speed is exactly estimated because the drift and offset problems are solved by the PLPF. The experimental results show good performance over the 10[%] of the rated speed and under load condition.

• Journal of Korea Society of Digital Industry and Information Management
• /
• 제16권1호
• /
• pp.99-109
• /
• 2020

In the past, conservative concepts have been applied in terms of the characteristic of nuclear power plants(NPPs), resulting in analog-based equipment and closed networks. However, as digital technology has recently been applied to the design, digital-based facilities and communication networks have been used in nuclear power plants, increasing the risk of cybersecurity than using analog-based facilities. Nuclear power plant facilities are divided into a safety system and a non-safety system. It is essential to identify the difference and cope with cybersecurity threats to the safety system according to its characteristics. In this paper, we examine the cybersecurity regulatory guidelines for safety systems in nuclear power plant facilities. Also, we analyze cybersecurity threats to a programmable logic controller of the safety system and suggest cybersecurity requirements be applied to it to respond to the threats. By implementing security functions suitable for the programmable logic controller according to the suggested cybersecurity requirements, regulatory guidelines can be satisfied, and security functions can be extended according to other system requirements. Also, it can effectively cope with cybersecurity attacks that may occur during the operation of nuclear power plants.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.1047-1057
• /
• 2016

Design engineering process for field programmable gate array (FPGA)-based reactor trip functions are developed in this work. The process discussed in this work is based on the systems engineering approach. The overall design process is effectively implemented by combining with design and implementation processes. It transforms its overall development process from traditional V-model to Y-model. This approach gives the benefit of concurrent engineering of design work with software implementation. As a result, it reduces development time and effort. The design engineering process consisted of five activities, which are performed and discussed: needs/systems analysis; requirement analysis; functional analysis; design synthesis; and design verification and validation. Those activities are used to develop FPGA-based reactor bistable trip functions that trigger reactor trip when the process input value exceeds the setpoint. To implement design synthesis effectively, a model-based design technique is implied. The finite-state machine with data path structural modeling technique together with very high speed integrated circuit hardware description language and the Aldec Active-HDL tool are used to design, model, and verify the reactor bistable trip functions for nuclear power plants.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1188-1198
• /
• 2015

In this paper, a multi-time programmable (MTP) cell based on a $0.18{\mu}m$ bipolar-CMOS-DMOS backbone process that can be written into by using dual pumping voltages - VPP (boosted voltage) and VNN (negative voltage) - is used to design MTP memories without high voltage devices. The used MTP cell consists of a control gate (CG) capacitor, a TG_SENSE transistor, and a select transistor. To reduce the MTP cell size, the tunnel gate (TG) oxide and sense transistor are merged into a single TG_SENSE transistor; only two p-wells are used - one for the TG_SENSE and sense transistors and the other for the CG capacitor; moreover, only one deep n-well is used for the 256-bit MTP cell array. In addition, a three-stage voltage level translator, a VNN charge pump, and a VNN precharge circuit are newly proposed to secure the reliability of 5 V devices. Also, a dual memory structure, which is separated into a designer memory area of $1row{\times}64columns$ and a user memory area of $3rows{\times}64columns$, is newly proposed in this paper.

• ETRI Journal
• /
• 제35권4호
• /
• pp.594-602
• /
• 2013

This paper proposes printed organic one-time programmable read-only memory (PROM). The organic PROM cell consists of a capacitor and an organic p-type metal-oxide semiconductor (PMOS) transistor. Initially, all organic PROM cells with unbroken capacitors store "0." Some organic PROM cells are programmed to "1" by electrically breaking each capacitor with a high voltage. After the capacitor breaking, the current flowing through the PROM cell significantly increases. The memory data is read out by sensing the current in the PROM cell. 16-bit organic PROM cell arrays are fabricated with the printed organic PMOS transistor and capacitor process. The organic PROM cells are programmed with -50 V, and they are read out with -20 V. The area of the 16-bit organic PROM array is 70.6 $mm^2$.

• Journal of Power Electronics
• /
• 제6권3호
• /
• pp.235-244
• /
• 2006

Recently, speed sensorless vector control for synchronous reluctance motors (SYRMs) has deserved attention because of its advantages. Although rotor angle calculation using flux estimation is a straightforward approach, the DC offset can cause an increasing pure integrator error in this estimator. In addition, this method is affected by parameter fluctuation. In this paper, to control the motor at the low speed region, a modified programmable cascaded low pass filter (MPCPLF) with sensorless online parameter identification based on a block pulse function is proposed. The use of the MPCLPF is suggested because in programmable, cascade low pass filters (PCLPF), which previously have been applied to induction motors, the drift increases vastly wl)en motor speed decreases. Parameter identification is also used because it does not depend on estimation accuracy and can solve parameter fluctuation effects. Thus, sensorless speed control in the low speed region is possible. The experimental system includes a PC-based control with real time Linux and an ALTERA Complex Programmable Logic Device (CPLD), to acquire data from sensors and to send commands to the system. The experimental results show the proposed method performs well, speed and angle estimation are correct. Also, parameter identification and sensorless vector control are achieved at low speed, as well as, as at high speed.