• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.714-719
• /
• 2000

In this paper, an application program is made to simulate the behavior of a ship block under various crane works and to generate data of lu9 reactions and wire tensions. The program is based on a CAD program, Pro/ENGINEER. A ship is composed of more than 100 ship blocks. In order to lift, move, turn, or put a ship block at a convenient location fur assembling, workers in a shipyard use cranes, wires, and lugs temporarily attached to the block. In the procedure of lifting and turning a ship block with a crane, it is important to find suitable lug points and wires to do the handling efficiently and prevent accidents. Evaluation of forces in lugs and wires is necessary, but the problem is rather complex due to nonlinearity and nonuniqueness. In the present development, the nonlinear system of equations for quasi-static equilibriums is derived and a Newton type solution method is adopted to solve the system. The importance of initial estimates to the solution is illustrated and two approaches are utilized and compared. With the program developed, users can assign lug points on the CAD model by mouse and choose various linking devices at each crane point. Users can try to simulate the motion for any prescribed conditions, compare the motion of the block and the reactions and choose appropriate lug points and the type of wires and lugs.

• 정보교육학회논문지
• /
• 제22권1호
• /
• pp.53-60
• /
• 2018

본 연구는 블록 코딩을 선행 학습한 학생들에게 적용할 수 있는 Python 교육 프로그램의 개발에 관한 것이다. 우선 초중등학교 교육과정과 EPL 교재의 분석을 통해 블록코딩 학습자의 수준을 분석하고 블록 코딩에서 사용된 개념을 중심으로 Python 문법을 추출하여 교육과정을 구성한 뒤 PBL 수업에 맞는 Python 교육 프로그램을 총 16차시로 개발하였다. Python 교육프로그램의 적절성을 검증하기 위해 2차의 전문가의 타당도 검사를 하였다. 검사 결과, 1차 타당도 24문항에서 CVR값 .78 점 이상으로 나타나 일부 수정, 보완하였다. 2차 검사에서는 21개 문항은 타당성을 확보하였고 CVR 최소값인 .99 이하인 3개 문항의 내용에 대해 수정하여 교육 프로그램을 완성하였다. 개발된 교육 프로그램이 스크립트코딩을 학습하기 위한 기초 자료로 유용하게 활용되길 기대한다.

• 한국시뮬레이션학회논문지
• /
• 제6권2호
• /
• pp.59-69
• /
• 1997

This paper proposes a simulation method of train control system to increase railroad transportation capacity in the Seoul Subway. Comparing with the conventional fixed block system, a new train operation method of "moving block system" shows a more capability of same railroad. A graphic simulation program is developed for application of moving block system to Seoul subway train control system. The result of the simulation program shows a shorten headway i.e. a more dense operation of trains and a higher efficiency of railroad with the suggested moving block system.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권12호
• /
• pp.1554-1563
• /
• 1999

This paper presents the design of high speed processor for a sequence logic control using field programmable gate array(FPGA). The sequence logic controller is widely used for automating a variety of industrial plants. The FPGA designed by VHDL consists of program and data memory interface block, input and output block, instruction fetch and decoder block, register and ALU block, program counter block, debug control block respectively. Dedicated clock inputs in the FPGA were used for high speed execution, and also the program memory was separated from the data memory for high speed execution of the sequence instructions at 40 MHz clock. Therefore it was possible that sequence instructions could be operated at the same time during the instruction fetch cycle. In order to reduce the instruction decoding time and the interface time of the data memory interface, an instruction code size was implemented by 16 bits or 32 bits respectively. And the real time debug operation was implemented for easy debugging the designed processor. This FPGA was synthesized by pASIC 2 SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to sequence control system with inputs and outputs of 256 points. The designed processor for the sequence logic was compared with the control system using the DSP(TM320C32-40MHz) and conventional PLC system. The designed processor for the sequence logic showed good performance.

• 한국임상수의학회지
• /
• 제26권5호
• /
• pp.476-479
• /
• 2009

Enucleation of a 9-year-old, spayed female Pekingese's right eye was scheduled because of recurrent eyeball rupture caused by chronic corneal ulcer and descemetocele. Scoliosis of the thoracic vertebra was observed on thoracic radiography. Complete blood count, electrolytes, serum chemistry profiles were within normal ranges except of alkaline phosphatase, which was markedly improved, compared with that of five months ago. Severe respiratory sinus arrhythmia was observed before induction of anesthesia, it disappeared after induction. Retrobulbar block was performed with 0.5% bupivacaine, 2% lidocaine, 0.1% epinephrine combination (4 : 1 : 0.2 ratio of volume) before start of surgery. After retrobulbar block, heart rate decreased from 110 to 76 beats/min and sinus arrhythmia recurred. It was considered as oculocardiac reflex caused by increase of intraorbital pressure from retrobulbar block, atropine (0.025 mg/kg, IV) was administered and intermittent positive pressure ventilation was started. Three minutes after atropine administration, abnormal waveform of the electrocardiograph was appeared, it suspected as ventricular or supraventricular tachycardia, so lidocaine (2 mg/kg, IV) was administered. Then, heart rate was maintained around 130 beats/min, and the surgery was finished without the other problems. Although, retrobulbar block is performed to provide analgesia and to prevent oculocardiac reflex in ophthalmic surgery, occasionally it could induce oculocardiac reflex by infiltrated volume.

• 대한지구과학교육학회지
• /
• 제12권2호
• /
• pp.131-140
• /
• 2019

이 연구에서는 창의교육의 일환으로 컴퓨팅 사고력을 개발할 수 있는 블록형 코딩프로그램을 활용해 지구과학 교수 학습에 적용하여 컴퓨팅 사고력에 대한 인식과 과학적 태도가 어떻게 변화되는지를 알아보고자 하였다. 연구 결과를 바탕으로 결론을 정리하면 다음과 같다. 첫째, 초등학생들에게 적용할 수 있는 블록형 코딩프로그램을 활용한 지구과학 교육프로그램을 개발하였다. 총 12차시로 구성된 프로그램은 학생 활동중심의 문제를 제공하여 다양한 사고를 학생들이 유도할 수 있도록 탐구활동을 설계하였다. 둘째, 블록형 코딩프로그램을 활용한 지구과학 교육프로그램을 통해 컴퓨터 프로그램 활용에 대한 자신감, 컴퓨터 활용통합학습, 컴퓨팅 사고력에 대한 자신감 및 컴퓨팅 사고력을 활용한 문제해결 요인에서 유의미한 결과를 나타냈다. 셋째, 블록형 코딩프로그램을 활용한 지구과학 교육프로그램은 호기심, 비판성, 협동성, 끈기, 창의성 항목에서 유의미한 차이를 나타내었다. 이것은 학생들이 문제를 접했을 때 의문을 갖고 이를 해결하는 과정에서 효과를 나타낸 것이라고 판단할 수 있다.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.1-10
• /
• 2000

This paper deals with rocking response behavior of rigid block structure subjected to horizontal excitation. A strict consideration of impact and sliding between the block and base is essential to investigate the rocking vibration characteristics because the rocking behavior were greatly influenced by the impact and sliding motion. Therefore, not only restitution coefficient between the block and base but also the energy dissipation rate which is associated with sliding motion, and the static and kinetic friction coefficient between those should be included in the modeling of rocking system. The analytic program was developed to be able to simulate the experimental responses of the block subjected to horizontal sinusoidal excitations. By using this program, rocking responses were numerically calculated by the nonlinear equations for rocking system. From the response simulation and rocking vibration experiment, the following results were obtained. The rocking responses are affected by the impact motion due to energy dissipation and friction and provide very complex behavior. The toppling condition of the block is also influenced by the impact motion and sliding motion.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1746-1754
• /
• 1998

A computer program has been developed to predict the heat transfer characteristics and the temperature distribution in the cylinder block of a 4-cylinder, 4-stroke engine. The finete element method is employed to handle the complex geometries associated with the practical cylinder block. The hexahedron finite element is used for a mesh generation of three-dimensional domain. The present numerical procedure has been validated with the measured temperature at several locations of cylinder block. The heat transfer characteristics of engine cylinder block is systematically analyzed for various engine speeds and loading conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.451-454
• /
• 1995

Increasing the transfortation efficiency is very important issue in railway system. Speed-up of train and shortage of headway can be its solution. Headway can vary with blocksection length, characteristics of the railway and signalling systems. Safety braking distance needed for passenger's safety is very important factor in block section division method. In this study, basic block section division program was developed with the differential ratio of braking distance resulted by grade value of the track. More complete block section division program is going to be developed by the help of experienced experts.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.113-118
• /
• 1999

The design program of fitting and thrust block including various shapes and sizes was developed for the GMR project (Great Man-made River Project in Lybia). It can automatically recalculated the minimum size of fitting required for the structural performance and can also determine the proper size of fitting for the safe and economic design by users. It was found that the results of this program was accurate and efficient when it was compared to other references. This program is also developed with GUI (Graphic User Interface) technology for the convenience of users.