• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.115-120
• /
• 2006

A Korean Road Roughness Classification(KRC) method is proposed. Using a dynamic road profiling device equipped with the Accelerometer Established Inertial Profiling Reference(AEIPR) method, road profile measurement is performed on various types of public paved roads in Korea. The road profiling data are processed to classify the characteristics of Korean road roughness. The resultant Korean road roughness classification(KRC) is shown different characteristics compared to the road classification proposed by ISO, MIRA, and Wong. The proposed KRC is composed of 8 classes(A-H, very good-poor) based on the power spectral density and is in good agreements with the characteristics of Korean paved road roughness and can be used well in vehicle ride comfort simulation using domestic road profile.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1359-1361
• /
• 2003

A set of microwave remote sensing data collected with the newly developed UMass Imaging Wind and Rain Airborne Profiler (IWRAP) during the 2002 Atlantic Hurricane Season was analyzed to further our understanding of the effect of precipitation on scatterometer wind vector retrieval. Coincident surface wind speed and precipitation measurements were provided by the UMass Simultaneous Frequency Microwave Radiometer (SFMR). The differences between the wind estimations from IWRAP and SFMR under precipitation conditions of 0-100mm/hr and wind speed of 0-60m/s was calculated, from which the effect of precipitation on the wind vector retrieval using scatterometry is analyzed qualitatively.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.249-255
• /
• 1999

Deposition characteristics of Cu thin films using Ar carrier gas and $H_2$ processing gas at various working pressures and substrate temperatures were investigated. Also, effects of $H_2$ pretreatment using plasma at $200^{\circ}C$ of substrate temperature and 0.6 Torr of chamber pressure were stdied. Cu thin films were deposited on TiN/Si substrate at working pressure of 0.5~1.5 Torr, substrate temperatures of 140~$240^{\circ}C$ with (hface)Cu(tmvs). Substrates were pretreated by $H_2$ plasma, and Cu films deposited in situ using twofold shower head. The purity, electrical resistivity, thickness, surface morphology, optical properties of the deposited Cu films were measured b the AES, four point probe, stylus profiler, SEM,. and the uv-visible spectrophotometer. This study suggests that $H_2$ plasma is an effective method for enhancing deposition rate and for producing high quality copper thin films.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.220-220
• /
• 2010

대향타겟식 스퍼터링 (Facing Target Sputtering, FTS) 장치를 이용하여 박막태양전지에 응용가능한 GAZO 박막을 플렉시블 기판 (PES) 위에 증착하였다 박막을 증착하는 데 쓰인 각각의 타겟은 AZO(ZnO:$Al_2O_3$=98:2w.t%) : GZO(ZnO:$Ga_2O_3$=97:3w.t%)이였으며, 다양한 스퍼터링 조건(공정압력, 입력 전력 및 박막의 두께)에서 증착 하였다. GAZO 박막의 전기적 특성은 Hall effect measurement, Four Point Probe, 광학적 특성은 UV-VIS spectrometer, 구조적 특성은 XRD, AFM, FE-SEM, 막의 두께는 $\alpha$-step profiler 장비를 이용하여 분석하였다. 가장 낮은 비저항은 작업 압력 1mTorr일 때 $5.123{\times}10^{-4}[\Omega-cm]$를 보였다. 또한 제작된 모든 박막은 (002)회절 피크로 우선성장함을 알 수 있었으며, 가시광선 영역(300nm-800nm)에서 80% 이상의 광 투과율을 나타냄을 알 수 있었다.

• Transactions of Materials Processing
• /
• v.19 no.2
• /
• pp.132-137
• /
• 2010

In the multi-pass shape drawing process, the appropriate process design is very important to produce sound products. The reduction ratio, die angle, and the intermediate die shape are very important process variable of the multi-pass shape drawing. The aim of this study is the determination of the reduction ratio, die angle, and the intermediate die shape of the 2 pass shape drawing process for producing steering spline shaft. In this study, FE analysis, Taguchi method, and ANN(artificial neural network) were applied to determine the appropriate reduction ratio, die angle, and intermediate die shape. After the determination of the process variables, FE analysis and drawing experiment were performed to evaluate the effectiveness of the determined process variables. The dimensional accuracy of the final drawn spline shaft was evaluated by using 3D surface profiler and 3D laser digitizing system.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.55-62
• /
• 2005

This paper presents mainly a procedure to get the mathematical form of the manufactured aspherical lens. Generally Schulz formula describes the aspherical lens profile. Therefore, the base curvature, conic constant. and high-order polynomial coefficient should be set to get the approximated design equation. To find the best-approximated aspherical form, lens profile is measured by a commercial stylus profiler, which has a sub-micrometer measurement resolution. The optimization tool is based on the minimization of the root mean square of error sum to get the estimated aspherical surface equation from the scanned aspherical profile. Error minimization step uses the Nelder-Mead simplex (direct search) method. The result of the lens refractive power measurement shows the experimental consistency with the curvature distribution of the best-approximated aspherical surface equation

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.643-648
• /
• 2000

The AFM is an imaging tool or a profiler with unprecedented 3-D resolution for various surface types. The AFM technology, however, leaves a lot of room for improvement due to its delicate and fragile probing mechanism. The distance between probe tip and sample surface must be maintained in below the nano meter level in order to measure the sample surface in Angstrom resolution. In this paper, the mode analysis of AFM system, modification based on the mode analysis are performed and finally the sample surface is measured by the home-built AFM.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06c
• /
• pp.145-147
• /
• 2012

최근 데이터의 급증으로 인해 병렬 분산 처리 파일시스템의 사용이 증가되었으나 물리 자원 요구와 그에 따른 관리 자원 소모로 인해 가상화 환경에서의 병렬 분산 처리 파일 시스템이 활발히 연구되고 있다. 이의 성능 분석을 위해서는 프로파일러의 역할이 중요한데 현재 사용되고 있는 프로파일러들은 시스템 및 관리 프로파일러로써 가상화 환경에 적합하지 않아 가상화 환경에 적합하며 기존 프로파일러의 단점을 보완하는 새로운 프로파일러의 필요성이 증가하고 있다. 본 논문에서는 기존 프로파일러의 장단점을 분석하고 기존 프로파일러들의 단점을 보완하는 가상화 환경에 적합한 새로운 프로파일러의 구조를 제안한다.

• Journal of Radiation Industry
• /
• v.5 no.3
• /
• pp.243-247
• /
• 2011

In this study, a convenient method for the selective immobilization of single strand DNA (ssDNA) on a polymer surface was described. A positively charged polyelectrolyte, poly(diallyldimethylammonium chloride) (PDDA), was spin-coated on a tissue culture petridish and the micropatterns of the PDDA were formed by selective ion implantation through a pattern mask. The surface property of the implanted PDDA was investigated by using a surface profiler and FT-IR spectrometer. Cy3-labeled ssDNA was selectively immobilized on the PDDA patterns through ionic interaction and thus, well-defined ssDNA patterns were obtained.

• Korean Journal of Remote Sensing
• /
• v.18 no.5
• /
• pp.243-253
• /
• 2002

Time-mean and absolute geostrophic velocities of the Kuroshio current south of Japan are derived from TOPEX/Poseidon altimeter data using a Gaussian jet model. When compared with simultaneous measurements from a shipboard acoustic Doppler current profiler (ADCP) at two intersection points, the altimetric and ADCP absolute velocities correlate well with the correlation coefficient of 0.55 to 0.74. The accuracy of time-mean velocity ranges from 1 cm s$^{-1}$ to 5 cm s$^{-1}$. The errors in the absolute and the mean velocities are similar to those reported previously for other currents. The comparable performance suggests the Gaussian jet model is a promising methodology for determining absolute geostrophic velocities, noting that in this region the Kuroshio does not meander sufficiently and thus provides unfavorable environment for the performance of the Gaussian jet model.