• Tribology and Lubricants
• /
• v.1 no.1
• /
• pp.69-79
• /
• 1985

EHD(elastohydrodynamic) lubrication theories are applied to analyse the contact characteristies between the circular are profiled teeth of the plano-wheel gear and the cylindrical pin type teeth of the inner gear for the planocentric gears unit, For improving lubrication characteristic and contact frictional interference between the teeth, a new design method of optimising continuous meshing position is introduced, and the new tooth profile which is modified as a rounded curvature of the edge of circular arc is also suggested. The results of mathematical computation from conventional and the modified gear unit are compared, respectively.

• Structural Engineering and Mechanics
• /
• v.7 no.5
• /
• pp.433-445
• /
• 1999

Sandwich panels comprising steel facings and a polystyrene foam core are increasingly used as roof and wall claddings in buildings in Australia. When they are subjected to loads causing bending and/or axial compression, the steel plate elements of their profiled facing are susceptible to local buckling. However, when compared to panels with no foam core, they demonstrate significantly improved local buckling behaviour because they are supported by foam. In order to quantify such improvements and to validate the use of available design buckling stress formulae, an investigation using finite element analyses and laboratory experiments was carried out on steel plates that are commonly used in Australia of varying yield stress and thickness supported by a polystyrene foam core. This paper presents the details of this investigation, the buckling results and their comparison with available design buckling formulae.

• Tribology and Lubricants
• /
• v.28 no.4
• /
• pp.153-159
• /
• 2012

Tapered roller bearings are widely used in high axial-load and radial-load applications. In this study, a numerical analysis is performed to study a finite line contacts EHL problem between a tapered roller and raceway in tapered roller bearings. Converged solutions are obtained for moderate load and material parameters using a finite difference method with non-uniform grids and the Newton-Raphson method. The contours and sectional plots of pressure distribution and film shape are compared. The pressure distribution and film shapes near both ends of the roller are very different from those in the central part and are transversely asymmetric. The maximum pressure and absolute minimum film thickness always occur at the small end of the roller.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.208-211
• /
• 2001

In the drawing from round billet to non-circular section there are two different processes through solid hole die(HD) and the other cassette roller dies(CRD). The CRD process has several cassette type rollers and a billet is able to move through the given gaps between two profiled rollers. The objective of this study is based on the analysis and evaluation of two aforementioned processes using experiments and finite element simulation. In order to simulate the multi-stage drawing process from circular sectioned billet to rounded square section, the finite element analysis is applied to the process using a commercially available DEFORM-3D code. Two types of experimental drawing tests through designed and manufactured dies for pure copper and aluminum alloy are carried out at room temperature. The analysis included comparison of material properties before and after drawing of each process and also provide some useful information by a FEM simulation.

• Journal of Information Technology Applications and Management
• /
• v.19 no.2
• /
• pp.97-116
• /
• 2012

Since 2008 when IPTV service entered the broadcasting market, the competition among interactive broadcasting media has been growing more and more fierce. To make a market strategy under the harsh competition, this study tried to make an IPTV customer segmentation based on the characteristics of interactive broadcasting media. From previous literature, this study drew five characteristics of interactive broadcasting media : ease of use, two-way communications, active control, variety of content, and economic efficiency. Two-step clustering based on these characteristics identified four customer segments. There were statistically significant differences in the five characteristics among the customer segments. This study profiled the customer segments and proposed competitive strategies for each customer segment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.293-298
• /
• 1993

In ground vehicles, the increasing demand for safety and ride comfort which are trade-off relation, especially at high speeds, has led to the development od actively controlled suspensions. The LQG/LTR controller can be used to design a robust feedback control system that deals with disturbance rejection properties as well as insensitivity to modelling errors and sensor noise. And when the disturbance can not be measured but is limited within a certain frequency range, a bandpass feedback to eliminate the disturbance response can be used. In this paper, hybrid controller cosisted of bandpass feedback controller and LQG/LTR controller is applied to a quarter-car model moving on a randomly profiled road. The random road profile considered as colored noise is shaped from white noise by use of shaping filter. The performance of the hybrid control system is compared with that of an LQG/LTR controlled system.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.6
• /
• pp.1368-1376
• /
• 2005

Pseudomonas aeruginosa produces a variety of bacteriocidal substances including pyocins that are active against the same species, but their physiological roles are relatively unknown. Here, we profiled the bacteriocidal activities in the culture supernatants of various P. aeruginosa isolates and describe the competitive growth advantages of strains PAO1 and PA14 over some strains including PAK, which are sensitive to their bacteriocidal activities. These findings suggest that the factors governing the production of pyocins and the resistance to them play important roles in controlling P. aeruginosa populations in its local environments.

• Structural Engineering and Mechanics
• /
• v.39 no.3
• /
• pp.317-338
• /
• 2011

Three-dimensional thermal and mechanical coupled finite element models are proposed to study the structural behaviours of shear connectors under fire. Concrete slabs, steel beams and shear connectors are modelled with eight-noded solid elements, and profiled steel deckings are modelled with eight-noded shell elements. Thermal, mechanical and geometrical nonlinearities are incorporated into the models. With the proper incorporation of thermal and mechanical contacts among steel beams, shear connectors, steel deckings and concrete slabs, both of the models are verified to be accurate after the validation against a series of push-out tests in the room temperature or under the standard fire. Various thermal and mechanical responses are also extracted and observed in details from the results of the numerical analyses, which gives a better understanding of the structural behavior of shear connectors under elevated temperatures.

• Journal of Biomedical Engineering Research
• /
• v.38 no.5
• /
• pp.271-276
• /
• 2017

Cancer biomarkers are using in the diagnosis, staging, prognosis and prediction of disease progression. But, there are not sufficiently profiled and validated in early detection and risk classification of prostate cancer. In this study, we have devoted to finding a panel of serum biomarkers that are able to detect the diagnosis of prostate cancer. The serum samples were consisted of 111 prostate cancer and 343 control samples and examined. Eleven biomarkers were constructed in this study, and then nine biomarkers were relevant to candidate biomarkers by using t test. Finally, four biomarkers, PSA, ApoA2, CYFRA21.1 and TTR, were selected as the prostate cancer biomarker panel, logistic regression was used to identify algorithms for diagnostic biomarker combinations(AUC = 0.9697). A panel of combination biomarkers is less invasive and could supplement clinical diagnostic accuracy.

• Tribology and Lubricants
• /
• v.29 no.6
• /
• pp.353-359
• /
• 2013

The rollers and/or races in cylindrical and tapered roller bearings should be profiled to relieve high edge stress concentrations caused by their finite lengths and misalignment. In this study, a numerical analysis was performed to investigate the elastohydrodynamic lubrication (EHL) of a Lundberg profile-type cylindrical roller. A finite difference method with fully nonuniform grids and the Newton-Raphson method were used to present detailed EHL pressure distributions and film shapes, as well as the variations in the minimum and central film thicknesses with the profile modification coefficient. In the Lundberg profile, the maximum pressure and minimum film thickness always occurred near the edges. Proper modification of the Lundberg profile considerably increased the minimum film thickness.