• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.712-717
• /
• 2007

This study deals with the TE(Transmission Error) of gear tooth profile by modifying a profile and lead of a surface of tooth. First, we experimentally confirmed that the TE is a synthesis of the sliding velocity between both gears. Since various types of TE appear in the experiments, we introduced definition of transmission error and the optimism design by modifying a surface parameters. The test stand's performance is then evaluated through a series of multiple torque transmission error tests. Comparisons are made between data recorded before and after the test stand's redesign, and subsequently repeatability studies are performed to verify the veracity of the measured data. Finally, the experimental results are compared to the analytical predictions of two different gear analysis programs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.97-98
• /
• 2006

This study deals with the Transmission Error of gear tooth profile by modifying a Profile and lead of a surface of Tooth. First, we experimentally confirmed that the Transmission Error is a synthesis of the sliding Velocity between both gears. Since various types of Transmission errors appear in the experiments, we introduced definition of Transmission Error and The Optimism Design by modifying a surface parameters The test stand's performance is then evaluated through a series of multiple torque transmission error tests. Comparisons are made between data recorded before and after the test stand's redesign, and subsequently repeatability studies are performed to verify the veracity of the measured data. Finally, the experimental results are compared to the analytical predictions of two different gear analysis programs.

• Tribology and Lubricants
• /
• 제23권3호
• /
• pp.117-122
• /
• 2007

This study deals with the TE (Transmission Error) of gear tooth by modifying a profile and lead of a surface of tooth. First, we experimentally confirmed that the TE is a synthesis of the sliding velocity between both gears. Since various types of TE appear in the experiments, we introduced definition of transmission error and the optimism design by modifying a surface parameters. The test stand's performance is then evaluated through a series of multiple torque transmission error tests. Comparisons are made between data recorded before and after the test stand's redesign, and subsequently repeatability studies are performed to verify the veracity of the measured data. Finally, the experimental results are compared to the analytical predictions of two different gear analysis programs.

• 한국정보처리학회논문지
• /
• 제6권11S호
• /
• pp.3320-3331
• /
• 1999

In this paper, we explore two ways to improve the bandwidth assurance performance of Assured Service(AS). It is well known that AS fails to meet the bandwidth assurance target for large-profile TCP flows competing with many small-profile flows. This flows after the back-offs induced by packet drops. Thus currently proposed solution to this problem naturally focus on modifying TCP's behavior to counter the unfairness in the TCP dynamics. Unfortunately, these proposals lack practicability in terms of the required changes in the incumbent Internet infrastructure. Admitting this difficulty, we instead look to not yet deployed Diff-Serv mechanisms for practical solutions. In particular, we investigate the role of RIO, RED with IN(in-profile) and OUT(out-profile), queue management scheme in the assurance failure for As. Specifically, we identify the inadequacy of RIO that aggravates the bandwidth assurance failure. Then we alleviates the bandwidth assurance failure problem by separately controlling the out-of-profile packet queue length. Through extensive simulations we demonstrate that RI+O extends the regime where AS consistently provides the bandwidth assurance.

• 대한전자공학회논문지
• /
• 제23권6호
• /
• pp.929-935
• /
• 1986

In this paper, we describe the physical modelling and numerical aspects of a program called PRECISE(Program for Efficient Calculation of Impurity Profile in Semiconductor by Elimination) which calcualtes a two-dimensional impurity profile in silicon due to diffusion and ion implantation steps. The PRECISE enables rapid prediction of the two-dimensional impurity profile near the mask edge-or the bird's beak during the local oxidation process. This has been developed by modifying the existing one-dimentional simulator, DIFSIM(DIFfusion SIMulator to include models for arsenic diffusion and emitter dip effect which were found out to agree fairly well with the xperimental data.

• 드라이브 ㆍ 컨트롤
• /
• 제17권1호
• /
• pp.1-12
• /
• 2020

This study was to develop a simulation model of a compound planetary gear reducer for the final driving shaft using a gear analysis software (KISSsoft, Version 2017, KISSsoft AG, Switzerland). The aim of this study is to analyze transmission error and the tooth load distribution through micro-geometry using the simulation model. The tip and root relief were modified with Micro-geometry in the profile direction, and crowning was modified with Micro-geometry in the lead direction. The transmission error was analyzed using the PPTE (Peak to Peak Transmission Error) value, and the tooth load distribution was analyzed for the concentrated stress on the tooth surface. As a result of modifying tip and relief in the profile direction, the transmission error was reduced up to 40.7%. In the case of modifying crowning in the lead direction, the tooth load was more evenly distributed than before and decreased the stress on the tooth surface. After modifying the profile direction for the 1st and 2nd planetary gear train, the bending and contact safety factors were increased by 31.7% and 17%, and 18.3% and 12.5% respectively. Moreover, the bending and safety factors after modifying lead direction were increased by 59.5% and 32.7%, respectively for the 1st planetary gear train, and 59.6% and 43.6%, respectively for the 2nd planetary gear train. In future studies, the optimal design of a compound planetary gear reducer for the final driving shaft is needed considering both the transmission error and tooth load distribution.

• 한국농공학회지
• /
• 제44권4호
• /
• pp.51-61
• /
• 2002

The objective of this study is to develop GLEANS-PADDY model to predict nutrients loading from paddy-field areas. This model is developed by modifying the GLEANS model which is used for uplands, and composed of hydrology and nutrient submodels. The optimal field size for CLEANS-PADDY model application is about up to 50 ha with mild slope, relatively homogeneous Soils and spatially rainfall, and a single crop farming. The CLEAMS model is modified to handle ponded soil surface condition and saturated soil profile in paddy field. In the hydrology submodel of the CLEAMS-PADDY model. the ponded depth routing method is used to handle the ponded water condition of paddy field. To compute potential evapotranspiration the FAO-24 Corrected Blaney-Criddle method is used for paddy field instead of Penman-Monteith method in the CLEAMS model. In the nutrients submodel of the CLEAMS-PADDY model, the soil was assumed saturated and soil profile in the root zone was divided into oxidized and reduced zones.

• Journal of Mechanical Science and Technology
• /
• 제14권5호
• /
• pp.490-498
• /
• 2000

The authors have proposed methods (lead crowning and profile modification) for modifying the geometry of spur gears and investigated the contact pattern as well as the transmission errors to recommend the appropriate amount of modification. Based on the investigation, dynamic load of the modified spur gear drive has been calculated, which is helpful to predict the life of the designed gear drive. Computer programs for simulation of meshing, contact and dynamics of the modified spur gears have been developed. The developed theory is illustrated with numerical examples.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.109-117
• /
• 2014

This paper reports a method to modify the gear tooth profile of a wind turbine gearbox to reduce the noise caused by the impact of the gear teeth. The major causes of tooth impact are the elastic deformation of the gear teeth, shafts, and case of the gearbox under loading, and the fabrication tolerances in gear manufacturing. In this study, the tooth profile was modified considering the elastic deformation of the gear tooth and the tooth lead modification to compensate for tooth interference in the lead direction as a result of shaft deformations. The method was applied to the gearbox of a 2.5MW wind turbine, and the transmission error was characterized before and after modifying the gear teeth. For the modified gear teeth, the transmission error (67.6%) was lower by 17.8%. Additionally, the gear contact stress was reduced by 6.3%, to 22.3%.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.81-84
• /
• 2007

In this research, we will accomplish the investigation of the devices and data models which are used in the existing indoor and outdoor systems. Based on the investigation, we will seize the additional requirements for the integration of the legacy system and then we will propose the various methods which support the additional requirements. By applying the various methods in the heterogeneous environments, we will solve the legacy problems and propose the methods for the final goal that is to provide the seamless moving object tracking. The scope of this research is to propose the integration methods, developing the actual location tracking system model without modifying the legacy infrastructures.