Browse > Article
http://dx.doi.org/10.7735/ksmte.2014.23.2.109

Gear Teeth Modification for a 2.5MW Wind Turbine Gearbox  

Lee, Hyoung Woo (Dept. of Mechatronics Engineering, Jungwon University)
Kang, Dong-Kwon (Division of Automotive Engineering, Dong-Eui Institute of Technology)
Publication Information
Journal of the Korean Society of Manufacturing Technology Engineers / v.23, no.2, 2014 , pp. 109-117 More about this Journal
Abstract
This paper reports a method to modify the gear tooth profile of a wind turbine gearbox to reduce the noise caused by the impact of the gear teeth. The major causes of tooth impact are the elastic deformation of the gear teeth, shafts, and case of the gearbox under loading, and the fabrication tolerances in gear manufacturing. In this study, the tooth profile was modified considering the elastic deformation of the gear tooth and the tooth lead modification to compensate for tooth interference in the lead direction as a result of shaft deformations. The method was applied to the gearbox of a 2.5MW wind turbine, and the transmission error was characterized before and after modifying the gear teeth. For the modified gear teeth, the transmission error (67.6%) was lower by 17.8%. Additionally, the gear contact stress was reduced by 6.3%, to 22.3%.
Keywords
Wind turbine; Tooth modification; Contact pressure; Transmission error; Gearbox;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Heier, S., Waddington, R., 2006, Grid Integration of Wind energy conversion system(2nd Edition), John Wiley & Son, New York.
2 Kubo, A., Nonaka, T., Kato, N., Kato, S., Ohmori, T., 1990, Representative Form Accuracy of Gear Tooth Flanks on Prediction of Vibration and Noise of Power Transmission, JSME(C) 56:532 238-243.
3 Mark, W. D., 1987, Analytical Reconstruction of Running Surfaces of Gear Teeth-Part2: Combining Tooth Spacing Measurements with Profile and Lead Measurements, ASME J. of Mechanisms, Transmissions, and Automation in Design 19 268-274.
4 GRABER, J. M., 1994, A Theoretical and Experimental Study of Static and Dynamic Transmission Error for Spur and Helical Gears with Various Modification and Contact Ratios, Master thesis, The Ohio State University, USA.
5 Choi, M., David, J. W., 1990, Mesh Stiffness and Transmission Error of Spur and Helical Gears, SAE 901764.
6 Munro, R. G., 1990, A Review of the Theory and Measurement of Gear Transmission Error, IMechE C404/032.
7 Joo, S. H., Roh, O. H., Chung, D. H., Bae, M. H., Park, N. K., 1998, Modeling of Transmission Error of A Gear Pair with Modifed Teeth, J. of KSNVE 8:5 841-848.
8 SMT(Smart Manufacturing Technology), 2010, MASTA version 5.1 Advanced Training Manual, 1-45.
9 Bank, C. J., Paker, R. G., 2013, Analytical investigation of tooth profile modification effects on planetary gear dynamics, Mechanism and machine theory 298-319.
10 Mark, W. D., 2012, A Study on Wind Load Variation Characteristics of Wind Turbine Gearbox, J. of the Korean Society of Marine Engineering 36:2 267-275.   과학기술학회마을   DOI   ScienceOn
11 Kim, H. H., Nam, H. C., Kwon, S. M., 2012, Linear Drive Systems using Roller Gear Mechanism, J. of the Korean Society of Manufacturing Technology Engineers 21:5 689-854.   과학기술학회마을   DOI   ScienceOn
12 Kim, J. S., Lee, H. W., Park, N. G., Lee, D. H., 2011, Characteristic of Vibration in Wind turbine System, J. of the Korean Society of Marine Engineering 35:6 786-795.   DOI   ScienceOn