• 한국인쇄학회지
• /
• 제25권2호
• /
• pp.15-28
• /
• 2007

For the color offset printing, it starts with input of data. The past days, drum scanner or flat scanner used to input of data, but now it changes gradually into using of digital camera because digital camera become popular. The high quality digital camera saves as a data(RAW format), sRGB which have built in digital camera, or Adobe RGB format. sRGB of ICC(International Color Consortium) profile is a standard color gamut of digital camera. Distribution of color gamut in sRGB is less than Adobe RGB have a distribution in ICC profile. sRGB also can not be expressed in some specific part, because distribution of color gamut in sRGB is not able to cover all parts in ICC Profile of international standards CMYK. It is more popular to use Adobe RGB than sRGB to do high quality offset printing and software basis color setting in Europe and Japan. In spite of this data basis, there is a difficulty of doing color correction between the color proofing prints and the final prints. To see how the software color setting effects to RGB data, this thesis will use Gretag Macbeth ColorChecker 24 patch which has the most general natural color chart to compare sRGB and Adobe RGB to check the differences of color changes. It will use the several factors that came out from the process of making ICC Profile to figure out the optimum In-house profile. It also compares the differences of using matt paper and glossy paper to do best quality color proof offset printing, and how the Rendering Intent effects the proof print.

• Transactions on Electrical and Electronic Materials
• /
• 제17권5호
• /
• pp.270-274
• /
• 2016

This article investigates the use of the Gaussian-channel doping profile for the control of the short-channel effects in the double-gate MOSFET whereby a two-dimensional (2D) quantum simulation was used. The simulations were completed through a self-consistent solving of the 2D Poisson equation and the Schrodinger equation within the non-equilibrium Green’s function (NEGF) formalism. The impacts of the p-type-channel Gaussian-doping profile parameters such as the peak doping concentration and the straggle parameter were studied in terms of the drain current, on-current, off-current, sub-threshold swing (SS), and drain-induced barrier lowering (DIBL). The simulation results show that the short-channel effects were improved in correspondence with incremental changes of the straggle parameter and the peak doping concentration.

• 한국군사과학기술학회지
• /
• 제16권1호
• /
• pp.89-94
• /
• 2013

Electro Otical Tracking System(EOTS) is required for a rapid movement as well as the stabilization of Line-Of-Sight(LOS). In order to achieve these two goals, this paper presents a position and velocity driving profile generation method from the constant acceleration and deceleration profile according to the current state, enabling a fast and smooth trajectory even if the target position changes during the movement of LOS. Simulation and experimental results reveal that the settling time could be reduced significantly by adopting the present position control scheme.

• 대한치과교정학회지
• /
• 제30권1호
• /
• pp.101-114
• /
• 2000

한국인 성인에서 연령 증가에 따른 연조직 측모 변화 양상을 규명하기 위하여 남자 17명과 여자 8명을 대상으로 24세와 32세에 촬영된 측모 두부X-선 규격사진을 비교, 분석한 결과 다음과 같은 결론을 얻었다. 1. 관찰 기간 동안, 남녀 모두 경조직에서는 통계적으로 유의한 변화가 없었다 (p>0.05). 2. 연조직의 전후적 계측치에서 남자는 턱부위 (Pog', Gn')의 유의한 증가를, 여자는 하순 (LI)의 유의한 감소를 관찰할 수 있었다 (p<0.05). 3. 연조직의 수직적 계측치에서 남녀 모두 상순의 길이 (Sn-Sto) 가 증가하는 경향을 보였으나 통계적 유의성은 남자에서만 나타났고 하안면 고경 (Sn-Gn') 은 남녀 모두에서 유의하게 증가하였다 (p<0.05). 4. 연조직 두께는 남녀 모두 전체적으로 증가하는 경향을 보였으며 특히 턱부위 (Pog', Gn') 에서 유의한 증가가 있었다 (P<0.05).

• 대한치과교정학회지
• /
• 제32권5호
• /
• pp.355-360
• /
• 2002

교정치료 후 연조직의 변화가 나타난다. 특히, 하안면부위에 많은 변화를 일으키게 되며, 대표적으로 입술은 치아 이동량의 $60\~70\%$정도 이동한다고 알려져 있다. 하지만, 이동량은 개인마다 그 양상이 다양하다. 본 연구는 환자의 입술두께에 따라 연조직 이동 양상에 차이가 있는지 여부를 조사하는데 그 목적이 있다. 발치를 동반한 교정치료를 받은 성인환자를 대상으로 basic upper lip thickness에 따라 환자를 분류한 결과, 두께가 얇은 군(group 1)에서 치료 후 연조직 변화에 영향을 미치는 요인으로는 mentolabial angle와 하순의 변화간에 음의 상관관계를 보였다. 두께가 평균인 군(group 2)에서 상순의 변화에 영향을 미치는 요소로는 상악전치의 변화, 하악전치의 변화, 하순의 변화, nasolabial angle의 변화로 나타났으며, 하순의 변화에 영향을 미치는 요소로는 상순의 변화, 상악전치의 변화, 하악전치의 변화로 나타났다. 두께가 두꺼운 군(group 3)에서 는 상순, 하순의 변화는 전치위치의 변화나 연조직 변화와는 관련 없음으로 관찰되었다.

• 자원환경지질
• /
• 제26권1호
• /
• pp.29-40
• /
• 1993

Several vermiculite deposits occur as the alteration product from phlogopite in ultramafic rock, in the Hongseong and Cheongyang area, South Korea. Some quarries show well-defined weathering profile. Samples collected from those quarries were examined by XRD and chemistry to define a vertical variations in mineralogy and chemistry of the weathering profile developed on ultramafic rocks. The analysis by X-ray diffractometry showed that mineral compositions changed continuously as depth of profile increasing, the vermiculite-the phlogopite/vermiculite interstratified-the phlogopite. Chemical analysis of bulk samples in altered zone revealed that regardless of composition and kinds of mineral in the rock, there are significant increase of MgO, CaO and $H_2O$, and decrease of K as depth of profile decrease reflecting the characteristics in vermiculitization. Also, there was a tendency that weathering indicies of each sample horizon change gradually with increasing depth. This tendency can be explained as variations of degree of vermiculitization. The regular changes of mineralogical and chemical composition in vertical profile suggest that weathering is the most important process in vermiculitization in this area.

• Coupled systems mechanics
• /
• 제9권3호
• /
• pp.289-309
• /
• 2020

The paper studies the fluid flow profile contained between the orthotropic plate and rigid wall under the action of the moving load on the plate and main attention is focused on the fluid velocity profile in the load moving direction. It is assumed that the plate material is orthotropic one and the fluid is viscous and barotropic compressible. The plane-strain state in the plate and the plane flow of the fluid is considered. The motion of the plate is described by utilizing the exact equations of elastodynamics for anisotropic bodies, however, the flow of the fluid by utilizing the linearized Navier-Stokes equations. For the solution of the corresponding boundary value problem, the moving coordinate system associated with the moving load is introduced, after which the exponential Fourier transformation is employed with respect to the coordinate which indicates the distance of the material points from the moving load. The exact analytical expressions for the Fourier transforms of the sought values are obtained, the originals of which are determined numerically. Presented numerical results and their analyses are focused on the question of how the moving load acting on the face plane of the plate which is not in the contact with the fluid can cause the fluid flow and what type profile has this flow along the thickness direction of the strip filled by the fluid and, finally, how this profile changes ahead and behind with the distance of the moving load.

• 대한치과교정학회지
• /
• 제23권4호
• /
• pp.707-724
• /
• 1993

The purpose of the study is to estimate hard and soft tissue changes after orthognathic surgery for the correction of the mandibular prognathism and to describe interrelationship and ratios of soft and hard tissue changes. The presurgical and postsurgical lateral cephalograms of 31 treated patients(17 males and 14 females) was used ; these patients had received combined orthodontic-surgical treatment by means of a bilateral sagittal split ramus osteotomy. Their ages ranged from 16 to 31 years and mean age was 21.4 years. A computerized cephalometric appraisal was developed and used to analyse linear and angular changes of skeletal and soft tissue profile. The statistical elaboration of the data was made by means of $SPSS/PC^+$. The results of the study were as follows : 1. The correlations of soft and hard tissue horizontal changes were significantly high and the ratios were $97\%$ at LI, $107\%$ at ILS, and $93\%$ at Pog'. 2. The correlations of vertical changes at Stm, LI and horizontal changes at Pog were high$(26\%)$ and at the other areas were not statistically high. 3. The correlations of soft ad hard tissue vertical changes were not significantly high in all areas except Gn' $(30\%)$ and Me' $(56\%)$. 4. The soft tissue thickness was significantly decreased in upper lip and increased in lower lip, and the amount of changes after surgery was reversely correlated with initial thickness. 5. The facial convexity was increased and relative protrusion of upper lip was increased and that of lower lip was decreased. 6. The upper to lower facial height(Gl-Sn/Sn-Me') was increased and upper to lower jaw height(Sn-Stms/Stmi-Me') was increased.

• 자원환경지질
• /
• 제41권2호
• /
• pp.183-199
• /
• 2008

본 연구에서는 구룡광산에 적치된 광미층으로 부터 채취된 대표 비교란 코어시료를 대상으로 체계적인 물리 화학적 및 광물학적 특성을 심도별로 정량적으로 파악, 중금속 거동 핵심 영향요소를 기준으로 광미층 수직분대를 시도하고, 이를 기초로 광미층 비포화대-포화대에 걸친 원소 거동과 지화학적 조건과의 상관모델을 제시하고자 한다. 구룡광산의 대상 광미층은 화학적으로 지하수면을 경계로 상부층 구간에서의 낮은 pH(4)와 20wt.% 이상의 높은 $Fe_2O_3$ 및 $SO_3$ 함량에 의해 특징지어진다. 물리 화학적 및 광물학적 분석 자료를 고려하여 구룡광산 광미층을 심도증가에 따라 복토층, jarosite zone, Fe-sulfate zone, Fe-oxyhydroxide zone, gypsum-bearing pyrite zone, calcite-bearing pyrite zone, soil zone(광미층 집적 이전 토양층), weathered zone 등 7개분대로 구분할 수 있으며, 새로 생성된 이차광물상의 특성을 고려할 때 지하수면을 기준으로 상부층을 산화대(oxidation zone)로, 하부층을 비산화대(unoxidation zone), 혹은 carbonate-rich primary zone으로 크게 대분할 수 있다. 본 연구결과를 기초로 구룡광산 광미층의 물리 화학적 및 광물학적 변화를 지하수면 상부층에서의 황화광물, 특히 황철석의 산화반응이 핵심요소가 되어, 이로 인한 pH 값의 감소, 일차광물의 용해반응 및 원소 용출, 이차광물상 생성, 그리고 생성된 산의 탄산염 및 규산염광물에 의한 산-중화반응 등 일련의 지화학적 반응으로 설명할 수 있다.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.596-603
• /
• 2000

The hardness and elastic modulus of three bulk materials are computed from the load and displacement data which are measured during basic nanoindentation test and compared with values determined by independent means to assess the accuracy of the method. The results show that with this technique, modulus and hardness and elastic modulus profile through depth of silicon nitride and silicon oxynitride films. The results show that for silicon nitride film deposited on silicon, hardness and elastic modulus increase as the volume ratio of NH3 : SiH4, which had been used for deposition, increases up to 20.0; and for silicon oxynitride film on silicon, the hardness and elastic modulus profile changes distinctly as the relative amount of oxygen in deposition gas mixture changes.