• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.15-28
• /
• 2007

For the color offset printing, it starts with input of data. The past days, drum scanner or flat scanner used to input of data, but now it changes gradually into using of digital camera because digital camera become popular. The high quality digital camera saves as a data(RAW format), sRGB which have built in digital camera, or Adobe RGB format. sRGB of ICC(International Color Consortium) profile is a standard color gamut of digital camera. Distribution of color gamut in sRGB is less than Adobe RGB have a distribution in ICC profile. sRGB also can not be expressed in some specific part, because distribution of color gamut in sRGB is not able to cover all parts in ICC Profile of international standards CMYK. It is more popular to use Adobe RGB than sRGB to do high quality offset printing and software basis color setting in Europe and Japan. In spite of this data basis, there is a difficulty of doing color correction between the color proofing prints and the final prints. To see how the software color setting effects to RGB data, this thesis will use Gretag Macbeth ColorChecker 24 patch which has the most general natural color chart to compare sRGB and Adobe RGB to check the differences of color changes. It will use the several factors that came out from the process of making ICC Profile to figure out the optimum In-house profile. It also compares the differences of using matt paper and glossy paper to do best quality color proof offset printing, and how the Rendering Intent effects the proof print.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.5
• /
• pp.270-274
• /
• 2016

This article investigates the use of the Gaussian-channel doping profile for the control of the short-channel effects in the double-gate MOSFET whereby a two-dimensional (2D) quantum simulation was used. The simulations were completed through a self-consistent solving of the 2D Poisson equation and the Schrodinger equation within the non-equilibrium Green’s function (NEGF) formalism. The impacts of the p-type-channel Gaussian-doping profile parameters such as the peak doping concentration and the straggle parameter were studied in terms of the drain current, on-current, off-current, sub-threshold swing (SS), and drain-induced barrier lowering (DIBL). The simulation results show that the short-channel effects were improved in correspondence with incremental changes of the straggle parameter and the peak doping concentration.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.1
• /
• pp.89-94
• /
• 2013

Electro Otical Tracking System(EOTS) is required for a rapid movement as well as the stabilization of Line-Of-Sight(LOS). In order to achieve these two goals, this paper presents a position and velocity driving profile generation method from the constant acceleration and deceleration profile according to the current state, enabling a fast and smooth trajectory even if the target position changes during the movement of LOS. Simulation and experimental results reveal that the settling time could be reduced significantly by adopting the present position control scheme.

• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.101-114
• /
• 2000

The purpose of this study was to evaluate the soft-tissue profile changes from 24 to 32 yews of age in Korean adults. The subjects used in this study consisted of 17 males and 8 females. The data obtained from the lateral cephalograms taken at age 24 and 32, were analyzed statistically. The obtained results were as follows : 1. During the observation period, there were no significant changes in the hard-tissue measurements in both sexes (p>0.05). 2. In the anteroposterior measurements of soft-tissue, the males had significant increase in chin area (Pog', Gn'), and the females had significant decrease in lower lip (LI) (p<0.05). 3. In the vertical measurements of soft-tissue, both sexes showed the increased tendency in upper lip length (Sn-Sto) where the males showed significant increase (p<0.05). The lower facial height (Sn-Gn') turned out significant increase in both sexes (p<0.05). 4. In general, the females and males had the increased tendency in soft-tissue thickness, especially significant increase in chin area (Pog', Gn') (p<0.05).

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.355-360
• /
• 2002

After orthodontic treatment, there are several changes in soft tissue profile. Changes appear at lower anterior facial profile area, especially upper and lower lip. But there are many individual variations in the pattern of changes. So, this study was conducted to find out that the basic upper lip thickness could be one of the factors that could influence the treatment results. The samples were composed of 43 adult patients who had their 4 first premolars extracted. Groups were classified by their basic lip thickness. In group 1(thin upper lip group), there was negative relationship between mentolabial angle and lower lip change. In group 2(average lip thickness group), upper lip change was related to upper incisor change, lower incisor change, lower lip change and nasolabial angle change. And lower lip change was related to upper lip change, upper incisor change, lower incisor change. In group 3(thick upper lip group), there was no relation between both lip change and other variables.

• Economic and Environmental Geology
• /
• v.26 no.1
• /
• pp.29-40
• /
• 1993

Several vermiculite deposits occur as the alteration product from phlogopite in ultramafic rock, in the Hongseong and Cheongyang area, South Korea. Some quarries show well-defined weathering profile. Samples collected from those quarries were examined by XRD and chemistry to define a vertical variations in mineralogy and chemistry of the weathering profile developed on ultramafic rocks. The analysis by X-ray diffractometry showed that mineral compositions changed continuously as depth of profile increasing, the vermiculite-the phlogopite/vermiculite interstratified-the phlogopite. Chemical analysis of bulk samples in altered zone revealed that regardless of composition and kinds of mineral in the rock, there are significant increase of MgO, CaO and $H_2O$, and decrease of K as depth of profile decrease reflecting the characteristics in vermiculitization. Also, there was a tendency that weathering indicies of each sample horizon change gradually with increasing depth. This tendency can be explained as variations of degree of vermiculitization. The regular changes of mineralogical and chemical composition in vertical profile suggest that weathering is the most important process in vermiculitization in this area.

• Coupled systems mechanics
• /
• v.9 no.3
• /
• pp.289-309
• /
• 2020

The paper studies the fluid flow profile contained between the orthotropic plate and rigid wall under the action of the moving load on the plate and main attention is focused on the fluid velocity profile in the load moving direction. It is assumed that the plate material is orthotropic one and the fluid is viscous and barotropic compressible. The plane-strain state in the plate and the plane flow of the fluid is considered. The motion of the plate is described by utilizing the exact equations of elastodynamics for anisotropic bodies, however, the flow of the fluid by utilizing the linearized Navier-Stokes equations. For the solution of the corresponding boundary value problem, the moving coordinate system associated with the moving load is introduced, after which the exponential Fourier transformation is employed with respect to the coordinate which indicates the distance of the material points from the moving load. The exact analytical expressions for the Fourier transforms of the sought values are obtained, the originals of which are determined numerically. Presented numerical results and their analyses are focused on the question of how the moving load acting on the face plane of the plate which is not in the contact with the fluid can cause the fluid flow and what type profile has this flow along the thickness direction of the strip filled by the fluid and, finally, how this profile changes ahead and behind with the distance of the moving load.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.707-724
• /
• 1993

The purpose of the study is to estimate hard and soft tissue changes after orthognathic surgery for the correction of the mandibular prognathism and to describe interrelationship and ratios of soft and hard tissue changes. The presurgical and postsurgical lateral cephalograms of 31 treated patients(17 males and 14 females) was used ; these patients had received combined orthodontic-surgical treatment by means of a bilateral sagittal split ramus osteotomy. Their ages ranged from 16 to 31 years and mean age was 21.4 years. A computerized cephalometric appraisal was developed and used to analyse linear and angular changes of skeletal and soft tissue profile. The statistical elaboration of the data was made by means of $SPSS/PC^+$. The results of the study were as follows : 1. The correlations of soft and hard tissue horizontal changes were significantly high and the ratios were $97\%$ at LI, $107\%$ at ILS, and $93\%$ at Pog'. 2. The correlations of vertical changes at Stm, LI and horizontal changes at Pog were high$(26\%)$ and at the other areas were not statistically high. 3. The correlations of soft ad hard tissue vertical changes were not significantly high in all areas except Gn' $(30\%)$ and Me' $(56\%)$. 4. The soft tissue thickness was significantly decreased in upper lip and increased in lower lip, and the amount of changes after surgery was reversely correlated with initial thickness. 5. The facial convexity was increased and relative protrusion of upper lip was increased and that of lower lip was decreased. 6. The upper to lower facial height(Gl-Sn/Sn-Me') was increased and upper to lower jaw height(Sn-Stms/Stmi-Me') was increased.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.183-199
• /
• 2008

This study is focused on characterization of the physio-chemical and mineralogical properties, investigation of their vertical changes in the tailing profile of the Guryoung mining area, classification of the profile into distinct zones, and condition conceptual model of physio-chemical conditions and phases-water relationships controlling the element behaviors in the tailings. The upper part of the groundwater is characterized by the high contents of $Fe_2O_3$ and $SO_3$ for whole rock analysis, low pH, and the occurrence of jarosite, schwertmannite and Fe-oxyhydroxide as the secondary mineral phases. The tailing profile can be divided into the covering soil, jarosite zone, Fe-sulfate zone, Fe-oxyhydroxide and gypsum-bearing pyrite zone, calcite-bearing pyrite zone, soil zone, and weathered zone on the based of the geochemical and mineralogical characteristics. The profile can be sampled into the oxidized zone and the carbonate-rich primary zone with the dramatic changes in pH and the secondary mineral phases. The conceptual model proposed for the tailing profile can be summarized that the oxidation of pyrite is the most important reaction controlling the changes in pH, the dissolution of the primary silicates and carbonates, the precipitation of secondary mineral phases, acid-neutralizing, and heavy metal behaviors through the profile.

• Journal of the Korean Ceramic Society
• /
• v.37 no.6
• /
• pp.596-603
• /
• 2000

The hardness and elastic modulus of three bulk materials are computed from the load and displacement data which are measured during basic nanoindentation test and compared with values determined by independent means to assess the accuracy of the method. The results show that with this technique, modulus and hardness and elastic modulus profile through depth of silicon nitride and silicon oxynitride films. The results show that for silicon nitride film deposited on silicon, hardness and elastic modulus increase as the volume ratio of NH3 : SiH4, which had been used for deposition, increases up to 20.0; and for silicon oxynitride film on silicon, the hardness and elastic modulus profile changes distinctly as the relative amount of oxygen in deposition gas mixture changes.