• Journal of Food Hygiene and Safety
• /
• v.13 no.3
• /
• pp.299-304
• /
• 1998

From 1993 to 1996, 1,500 cases of foodborne disease was reported annually in Korea. Salmonellosis were 55.1% of the reported bacterial fordborne disease cases. However, in general, it is estimated that the reported incidence of salmonellosis represents less than the real incidence. This study showed that salmonellosis estimates 177,000 cases (about 150 times of reported cases) costing 5.9 billion won in Korea. Only medical costs and productivity losses were included in the estimate of costs of the 177,000 cases estimated to occur in 1996. This estimates were considerably difference to U.S.A. in cases and costs, but not significantly difference in cases/population (%), expense/GDP (%). Understanding the social economic costs of foodborne disease will be endorsed risk assessment as a necessary method for evaluation and improving food safety regulatory programs in Korea.

• Journal of Korean Academy of Nursing
• /
• v.38 no.3
• /
• pp.363-371
• /
• 2008

Purpose: This analysis was conducted to evaluate the cost-effectiveness of gemcitabine-cisplatin chemotherapy for non small-cell lung cancer patients in an outpatient setting compared with the traditional inpatient setting. Methods: A cost-effective analysis was conducted from a societal perspective. The effects of treatment, which was measured as an adverse event rate, were abstracted from a published literature search and empirical data from one university hospital. The costs included both direct and indirect costs. Direct costs included hospitalizations, outpatient visits, and lab tests. Pharmaceutical costs were excluded in analysis because they were same for both options. Indirect costs included productivity loss of patients as well as care-givers. In order to determine the robustness of the results, sensitivity analysis on treatment protocol was conducted. Results: Literature search showed no difference in adverse effect rates between inpatient treatment protocol and outpatient treatment protocol. Therefore, this analysis is a cost-minimization analysis. Cost-savings in the outpatient setting was 555,936 won for one treatment cycle. Our sensitivity analysis indicated that the outpatient chemotherapy still showed cost-savings, regardless of changes in treatment protocol. Conclusion: The outpatient gemcitabine-cisplatin chemotherapy for non small-cell lung cancer resulted in cost savings compared to inpatient chemotherapy. More importantly, outpatient chemotherapy could improve the utilization of health service resources in terms of available beds.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.1
• /
• pp.44-52
• /
• 2012

In the cost management of public construction projects, it is an important issue to develop an adequate cost data for estimating the predetermined amount by various methods. For a long time, a standard of estimation in korea is used as a basis for estimating the predetermined amount of public construction. However, they did not have a reasonable cost data based on a labor and equipment productivity analysis. For this reason, it is difficult to make a reasonable and efficient estimation of the costs, and this situation presents an urgent need for more accurate cost data to use in an early phase. This study analyzed the productivity of form work by the CYCLONE model, and presented the model on the number of optimal labor through sensitivity analysis. This CYCLONE model can be useful in analyzing productivity on the various sizes of form. Also, the regression model to estimate the daily output can be used in predicting the amount of labor. Considering the work duration in the regression model is expected to make the daily output estimation much more accurate.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.10
• /
• pp.109-117
• /
• 2021

This study investigates the effects of FDI and other macroeconomic variables on Total Factor Productivity (TFP) in selected ASEAN+3 countries from 1981 till 2016. Total Factor Productivity (TFP) for each ASEAN+3 country was constructed using the Malmquist productivity index method. Then, a panel ARDL framework (dynamic heterogeneous panel), namely Pooled Mean Group (PMG), Mean Group (MG), and Dynamic Fixed Effect (DFE) are employed in examining the effects of FDI and other controlling variables on TFP. The new findings show that FDI has a significant and positive impact on TFP in the long run and the short run in ASEAN+3 countries. Besides, the results also reveal that in the long run, other variables such as the average number of years of schooling and the ratio of high-skilled to low-skilled labor also have a significant and positive effect on TFP. However, economic openness, government expenditure on R&D, and interaction between countries and FDI have a negative and significant impact on TFP. These findings implied that the recipient countries must ensure their political stability and offer various incentives to attract more investors. Furthermore, the influx of foreign investors, especially large ones and lower costs, should be encouraged by each country as FDI inflows can boost their TFP growth.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.12
• /
• pp.173-180
• /
• 2019

Construction work is a labor-intensive industry, which is required systematic production activities using materials, manpower, and equipment. Among them, manpower resources play a very important role in achieving efficiently production in the organization. Construction work is highly dependent on construction craft workers, and the level of proficiency can be directly related to the construction productivity and quality. However, a rapidly aging construction craft workers in Korea, is being replaced by a foreign construction craft workers because of advoidance of new laborers in the construction site. In the future, if the continuous development and management of construction manpower is not made properly, it may be lead to adverse effects such as setbacks in production, delayed completion, faulty construction, industrial disasters, and decreased productivity in construction site. In this study, it was proposed four important factors for work capacity management of construction craft workers. These were ensuring of physical strength through the health management of construction craft workers, securing of proficiency through career management, ensuring of productivity through work capacity and establing of informatization through work capacity management. By introducing a systematic system, it is possible to improve construction craft workers' professionalism, enhancing the level of welfare, reflecting the realities of labor costs, increasing the quantitative and qualitative levels of construction craft workers, Futhermore it was demanded the continued interest and policy support for the realization of effective management of construction craft workers.

• International Journal of Advanced Culture Technology
• /
• v.9 no.1
• /
• pp.177-182
• /
• 2021

The fourth industrial revolution based on information and communication technology (ICT) becomes the center of society, and the overall industrial structure is also changing significantly. ICT refers to the hardware of information devices and the software technologies required for the operation and information management of these devices, and any means of collecting, producing, processing, preserving, communicating and utilizing them. ICT is integrated into industries and services or combined with new technologies in various fields such as robotics and nanotechnology to connect all products and services to the network. The development of ICT, which continuously creates new products and services, has spread to all sectors of the industry, affecting not only daily life but also the livestock sector recently. In agriculture, ICT technology can reduce production costs by efficiently managing labor and energy because it can improve quality and yield based on data on environmental and growth information such as temperature, humidity, light and soil. In particular, smart livestock is considered suitable for achieving livestock management goals because it can reduce labor force and improve productivity by remotely and automatically managing accurate information necessary for raising and breeding livestock with ICT devices. The purpose of this study is to propose the need for ICT technology by comparing farm productivity before and after ICT is introduced. The method of the study is to compare the productivity before and after the introduction of ICT in Korean beef farms, pig farms, and poultry farms. The effectiveness of the study proved the excellence of ICT technology through the production results before ICT introduction and the productivity improvement case of livestock farms that efficiently operated manpower management and reduced labor force after ICT introduction. The conclusion of this paper is to present the need for smart livestock through ICT adoption through case study results.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.293-298
• /
• 1999

To make use of various switches, relays, and control instruments, a connector (jack) is used to link the battery (power) and operating units. A connector must have precision as well as solidity to control the power in a car. To improve productivity, we researched and developed a connector molding by adapting vacuum system and we've made it possible to minimize the incomplete molding and weld-line. As a result, good quality can be warranted with less costs.

• Proceedings of The Korean Society of Health Promotion Conference
• /
• 1999.07a
• /
• pp.107-116
• /
• 1999

.Half of deaths are caused by life-style related problems in developed nations. .Health promotion can improve life-style and health. .Improvements in life-style and health lead to savings in medical care core costs and enhancements in productivity. .Win-Win-Win-Win : Management, Labor, Employees and Government benefit

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.171-180
• /
• 1999

Industrial equipment reliability improvement and maintenance is gaining attention as the next great opportunity for manufacturing productivity improvement. Reactive maintenance is expensive because of extensive unplanned downtime and damage to machinery. To avoid such an unplanned machine downtime, it is needed to use proactive maintenance approach by either using historical maintenance data or by sensing machine conditions. This paper discusses failure diagonosis and prediction based on the condition-based maintenance and reliability technique. Thus, by enabling such a framework, it can bring us more efficient planning and execution of maintenance to reduce costs and/or increase profits.

• Journal of Korean Society for Quality Management
• /
• v.14 no.2
• /
• pp.61-68
• /
• 1986

In this modern environment, manufacturing companies must continually persevere in their efforts to solve the problems encountered in the effort to improve productivity and quality while simultaneously reducing production costs. In this paper, we have approached the problem of layout planning by using the Muther' Systematic Layout Planning model (1961). This model applied the "H" company layout problem. In conclusion the "H" company mislayout in plant. We have a compare this model to old method ("H" company present layout), we produced a good result in layout.