• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.363-363
• /
• 2017

The NPK are known as macro elements that affect crop growth and yield. In 1989, Cambodia Agricultural Research and Development Institute (CARDI) gave a recommendation rate of fertilizer on rice production based on soil types. This recommended rate of NPK seems however relatively low as compared to farmers' practices nowadays and the amount in the neighboring countries. The CARDI recommended rate for Prateah Lang soil type is 50kg N, 25kg P2O5, 25kg K2O ha-1 while recent farmers' practice rates are 55 - 64kg N, 24 - 46kg P2O5, 30kg K2O ha-1. However, the overuse of chemical fertilizer will lead to un-preferable plant growth, insect pest, disease and economic yield. Thus, we examined the effect of different NPK application rates on the growth and yield components in Prateah Lang soil type in Takeo province to investigate appropriate rates for improving rice productivity with economic efficiency. This study was conducted from July to November during wet season in 2013. A multi-locational trial with 6 treatments (T0 - T5) of NPK rates in 5 locations (trial 1 - 5) with 3 replications was conducted. The different combinations of NPK application were employed from 0, 50, 60, 80, 100, 120kg N ha-1, 0, 25, 30 45, 60kg P2O5 ha-1 and 0, 15, 25, 30, 45kg K2O ha-1. Urea, DAP and KCl were used for fertilization. Split application was employed [basal: 20% of N, 100% of P and K, top dressing-1st: 40% of N (30DAT), 2nd: 40% of N (PI stage)]. Three-week-old seedlings of var. Phka Rumdoul were transplanted with 2 - 3 seedlings hill-1 with $20cm{\times}20cm$ spacing. Plant length, tiller number at the maximum tillering stage and yield components were measured. The different rates of NPK application affected some yield components. The panicle number per hill was the most important key component followed by the spikelet number per panicle. However, the other parameters such as the filled grain percentage and 1000 grains weight had small effect or weak relation with the yield. Although the panicle number per hill had a significantly positive correlation with the stem number per hill, it was not correlated with the percentage of productive culms. The variation in the grain yield among the 5 trials was small and the difference was not significant. Although the yield tended to be higher at higher N and P application, there was no significant difference above 60kg N and 30kg P2O5. The yield was the highest at 15, 30 and 45kg K2O followed by 25kg K2O. The relationships between N, P and the stem number per hill were significantly linear positive, though it was not linear between K and the stem number. From these results, to increase rice productivity in the target area, farmers' effort to increase N and P input rather than CARDI recommendation up to 60kg N and 30kg P2O5 will be sufficient considering economic efficiency. Besides, the amount of K application should be reconsidered.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.812-820
• /
• 2002

An experiment was conducted on 190 progeny (winter -74; summer -59; rainy -57) of 12 Grey Giant rabbits (10 female +2 males), to assess the effect of different seasons in a year, on their reproductive, growth and productive performances along with feed efficiency, under sub-temperate Himalayan conditions. The daily meteorological attributes recorded during winter (October to March), summer (April to June) and rainy (July to September) seasons, and analysed were minimum and maximum temperature, relative humidity and rainfall. Various biological parameters recorded were doe weights at mating and kindling, litter size at birth, litter weight at birth, kit mortality, litter size at weaning, litter weight at weaning, weekly body weight up to 98 d and weaner mortality. Individual weight gains, dressing percentages, meat weights, liver weights, raw-pelt weights, processed pelt weights and processed pelt areas at slaughter on d 84 and 98, respectively were also recorded. The feed and fodder compositions and their nutritive values during different seasons were also analysed. Average ambient temperature during winter, summer and rainy seasons were $13.2{\pm}2.8$, $22.4{\pm}3.7$ and $24.8{\pm}2.3^{\circ}C$, respectively. The average relative humidity and total rainfall for winter, summer and rainy seasons were $68.9{\pm}1.5$% and $48{\pm}26.6$mm, $66.3{\pm}4.8$% and $125.6{\pm}56.8$ mm, and $77.3{\pm}1.3$% and $116.3{\pm}90.4$ mm, respectively. The weight of doe at mating and kindling, litter size at birth, litter weight at birth and litter size at weaning were comparatively higher whereas litter weight at weaning was significantly (p<0.05) higher during winter as compared to summer and rainy seasons. The kit mortality was significantly (p<0.05) higher during winter while the weaner mortality was significantly (p<0.05) higher during rainy season. At 84 d, the live weight per doe, slaughter weight, dressing percentage and liver weight were significantly (p<0.05) higher during winter than summer and rainy. Similarly, the gain in weight and meat weight at 84 and 98 d were significantly (p<0.05) higher during winter. The weight of raw pelt and processed pelt were recorded significantly (p<0.05) higher during winter while no difference in the area of processed pelts during different seasons could be observed. No difference in the biological performance could be observed between sexes in any of the seasons. Roughage analysis revealed comparatively higher crude protein percent and lower crude fibre percent during summer and rainy seasons than in winter. The roughage dry matter intake was comparatively higher during summer and rainy seasons vis-a-vis constant amount of concentrate supplied during all the three seasons. The digestibilities of dry matter was significantly (p<0.05) lower, whereas that of crude fiber, acid detergent fibre and cellulose were negative during winter. Interestingly, the feed:gain was exceedingly well during winter than in other seasons and it is concluded that it was the best season for production of rabbits under sub-temperate Himalayan conditions.

• Journal of Distribution Science
• /
• v.10 no.7
• /
• pp.33-41
• /
• 2012

The purpose of this study is to analyse the state of the energy industry and to determine the efficiency of its functioning on the basis of energy conservation principle and application of innovative technologies aimed at improving the ecological modernisation of agricultural sectors of Kazakhstan. The research methodology is based on an integrated approach of financial and economic evaluation of the effectiveness of the investment project, based on calculation of elasticity, total costs and profitability, as well as on comparative, graphical and system analysis. The current stage is characterised by widely spread restructuring processes of electric power industry in many countries through introduction of new technical installations of energy facilities and increased government regulation in order to enhance the competitive advantage of electricity market. Electric power industry features a considerable value of creating areas. For example, by providing scientific and technical progress, it crucially affects not only the development but also the territorial organisation of productive forces, first of all the industry. In modern life, more than 90% of electricity and heat is obtained by Kazakhstan's economy by consuming non-renewable energy resources: different types of coal, oil shale, oil, natural gas and peat. Therefore, it is significant to ensure energy security, as the country faces a rapid fall back to mono-gas structure of fuel and energy balance. However, energy resources in Kazakhstan are spread very unevenly. Its main supplies are concentrated in northern and central parts of the republic, and the majority of consumers of electrical power live in the southern and western areas of the country. However, energy plays an important role in the economy of industrial production and to a large extent determines the level of competitive advantage, which is a promising condition for implementation of energy-saving and environmentally friendly technologies. In these circumstances, issues of modernisation and reforms of this sector in Kazakhstan gain more and more importance, which can be seen in the example of economically sustainable solutions of a large local monopoly company, significant savings in capital investment and efficiency of implementation of an investment project. A major disadvantage of development of electricity distribution companies is the prevalence of very high moral and physical amortisation of equipment, reaching almost 70-80%, which significantly increases the operating costs. For example, while an investment of 12 billion tenge was planned in 2009 in this branch, in 2012 it is planned to invest more than 17 billion. Obviously, despite the absolute increase, the rate of investment is still quite low, as the total demand in this area is at least more than 250 billion tenge. In addition, industrial infrastructure, including the objects of Kazakhstan electric power industry, have a tangible adverse impact on the environment. Thus, since there is a large number of various power projects that are sources of electromagnetic radiation, the environment is deteriorated. Hence, there is a need to optimise the efficiency of the organisation and management of production activities of energy companies, to create and implement new technologies, to ensure safe production and provide solutions to various environmental aspects. These are key strategic factors to ensure success of the modern energy sector of Kazakhstan. The contribution of authors in developing the scope of this subject is explained by the fact that there was not enough research in the energy sector, especially in the view of ecological modernisation. This work differs from similar works in Kazakhstan in the way that the proposed method of investment project calculation takes into account the time factor, which compares the current and future value of profit from the implementation of innovative equipment that helps to bring it to actual practise. The feasibility of writing this article lies in the need of forming a public policy in the industrial sector, including optimising the structure of energy disbursing rate, which complies with the terms of future modernised development of the domestic energy sector.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.2
• /
• pp.132-139
• /
• 2017

This study was conducted to find out the effects of over seeding using new grass varieties orchardgrass 'Kordione' and 'Onnuri', and tall fescue 'Greenmaster' on botanical composition and dry matter productivity from 2013 to 2016 in low productivity hilly pasture, middle area of Korea. There were used 3 grass seed mixture types made of different compositions and amounts {T1: control - no over seeding, T2: tall fescue (TF) 'Greenmaster' $18kg\;ha^{-1}$, orchardgrass (OG) 'Kordione' $9kg\;ha^{-1}$, Perennial ryegrass (PRG) 'Linn' $5kg\;ha^{-1}$, and Kentucky bluegrass (KBG) 'Kenblue' $2kg\;ha^{-1}$, T3: TF 'Greenmaster' $9kg\;ha^{-1}$, OG 'Kordione' $18kg\;ha^{-1}$, PRG 'Linn' $5kg\;ha^{-1}$, and KBG ' Kenblue' $2kg\;ha^{-1}$, T4: TF 'Greenmaster' $9kg\;ha^{-1}$, OG 'Onnuri' $18kg\;ha^{-1}$, PRG 'Linn' $5kg\;ha^{-1}$, and KBG 'Kenblue' $2kg\;ha^{-1}$}. In the botanical composition of grassland, T1 nearly remained constant in other seasons while ratio of weeds were increased in summer season. T2 was better than control (T1) in portion of grass ratio, which has increased by 80%. In the early time of establishment, the portions of OG were increased in T2, but TF rate was increased after 3 years later when grass was established. T3 and T4 showed a very similar patterns, grass ratio had increased by 80% and the portion of KBG had increased as time passed. T2 ($129,763kg\;ha^{-1}$) was showed the highest dry matter yield than other treatments (T1: $6,756kg\;ha^{-1}$, T3: 9641, and T4: 10,738) in 2016.

• The Korean Journal of Mycology
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1975

Since the importance of casing in fruit body formation of Agaricus bisporus has been emphasized, physico-chemical characteristics of casing materials were discussed by many workers and a mixture of peat and mineral soil as proper casing material has been adopted in many of mushroom growing countries. Because of limited resources of peat in Korea, it is necessary to find practical performance and substitutional materials for casing. The effect of casing on mycelial growth and mushroom yield of A. bisporus varied with materials, its combination and practices etc. The experiments to be discussed in this paper are concerned with pH and Ca of casing material which influence A bisporus, and changes of physico-chemical characteristics with mixing ratio of casing materials and its effect on A. bisporus. The optimum range of moisture content of each material, management of watering and application of physico-chemical characteristics casing materials was also investigated and re-use of weathered spent compost for casing material was described. 1. The effect of calcium on mycelial growth of A. bisporus at various pH in Halbschalentest showed different results with calcium sources. Best results were obtained around neutrality and fresh weight of fruit bodies grown in the range of pH 7 to 8 was highest among the tested levels. 2. Available moisture, pore space, organic matter, cation exchangeable capacity and exchangeable cation was increased by an increase of mixing ratio of peat in casing materials, while an adverse effect was obtained by addition of sand. 3. Mycelial growth on clay loam was more rapid at a lower bulk density of 0.75g/cc and at 20% moisture content on a dry weight basis at the same bulk density. 4. Mixing ratio of casing materials, 60 to 80 per cent by volume of peat mixed with 20 to 40 per cent of clay loam produced the highest yield of fresh fruit bodies and sand the lowest. However, per cent of open cap was highest in peat and lowest in sand. 5. Days required for fruit body initiation was shortened in mixtures of peat and clay loam by one to three days compared with other materials and the formation of flushes was clear. 6. The effect of some physico-chemical characteristics of casing materials on the fresh weight of fruit bodies were estimated by a multiple regression equation; Y=-923.86+$8.18X_1+8.04X_2+7.90X_3+0.12X_4+2.03X_5-0.82X_6-0.54X_7$ where $X_1,X_2,X_3,X_4,X_5,X_6,X_7$ are sand, silt, clay, available moistuer, porosity, organic matter and exchangeable cation respectively. The productivity of certain casing material could be predicted from this equation. 7. Fresh weight of fruit bodies was positively correlated with porosity exchangeable cation, organic matter, available moisture, silt and clay of materials; while sand was negatively correlated. On the contrary, sand was the unique factor reducing per cent of open cap. 8. Distribution of three phases of high productive casing material was concentrated in the range of 10 to 30 per cent solids, 15 to 30 per cent liquids, and 50 to 60 per cent in air volume. 9. Fresh weight of fruit bodies from peat was not affected with heavy watering but in clay loam and sandy loam severe crop losses occurred. Fresh weight of individual fruit was increased and open caps were decreased with heavy watering but light watering resulted in adverse effects: its effect was especially great in peat. 10. Optimum range of moisture content by weight on a dry basis was different with each casing material. To maintain optimum moisture content concerned with yield of fruit bodies and open cap, sandy loam and peat mixtures required daily watering of 0.6, 0.6 to 1. 2 and 1.2 to 2.4 liters per $3.3m^2$ of bed area, respectively. 11. Maximum yield of fruit body was recorded in the range of pF 2. 0 to 2. 5 of casing materials if organic matter content was below 4.2 per cent and in pF 1. 3 to 1.8 if above 7.1%. 12. pF curve of a certain casing material could be draws from moisture content at various pF values by multiple regression equations provided texture, organic matter and calcium of the casing material are given. Optimum moisture range of the casing materials also could be estimated by the equation. 13. It was possible to improve the phyico-chemical characteristics of clay loam and sandy loam by addition of weathered spent compost although the effect was less than in the case of peat. Fresh weight of fruit bodies wsa increased by addition of weathered spent compost but its effect was not as remarkable as peat. Accordingly, further studies will be required.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.384-394
• /
• 2019

We have investigated the effects of ambient temperature on the growth of wheat in Korea. The differences in the growth phase of wheat were compared according to the temperature treatment. The productive tiller number and dry weight were decreased in a plot under a higher temperature treatment. We found that the growth of Jinpum was different from that of the alternative wheat cultivars, which were bred in Korea, at 50 days after treatment. While the Jinpum wheat grown at 17℃ showed vegetative stage growth, that grown in the 23℃ growth chamber entered the heading and flowering stage. The differences in the expression of 16 genes known to be involved in high-temperature responses were checked by using Jinpum wheat 50 days after two temperature treatments (17℃ and 23℃), which showed apparent differences in expression between the higher and lower temperatures during the growth phase. In the 23℃ treatment samples, the genes with increased expression were HSP70, HSP101, VRN2, ERF1, TAA1, YUCCA2, GolS, MYB73, and Histone H2A, while the genes with decreased expression were VRN-A1, DREB2A, HsfA3, PIF4, PhyB, HSP17.6CII, rbcL, and MYB73. YUCCA2, HSP101, ERF1, and VRN-A1 showed a significant difference in gene expression between lower- and higher-temperature conditions. Overall, combining the means of the expression of various genes involved in thermosensing, vernalization, and abiotic stresses, it is possible to conclude that different sets of genes are involved in vernalization and summer depression of wheat under long term, high ambient temperature conditions.

• Journal of the Korean Geographical Society
• /
• v.38 no.2
• /
• pp.184-205
• /
• 2003

Sustainable Development(SD) is an important concept for the future of the coastal area, and for development of fishing villages. Since 1992 UN Conference on Environment and Development in Rio de Janeiro many governments and local authorities throughout the world have been engaged in preparing and implementing $\ulcorner$Agenda 21$\lrcorner$. Many projects which previously would have been identified as environmental protection are now presented under the banner of sustainable development. Integrated Coastal Management (ICM) is an extension of sustainable development. ICM was presented as a framework for resolution of coastal use conflicts. The aim of the present paper is to assess sustainable development potential of fishing villages in Cheonsu Bay Region according to implementation of ICM. Cheonsu Bay Region was known as one of the productive fishing grounds and Cheonsu Bay Region preserved unique characteristics of traditional fishing villages. But this region is now experiencing many changes through the massive reclamation projects like Seosan A B Project. After a brief overview of concepts and history of SD and ICM, the reclamation process and its impacts on both fishery and fishing communities in Cheonsu Bay Region are discussed. According to their changing environmental and socio-economic characteristics after the reclamation, ca 35 representative coastal villages in this region can be classified into 5 types. Many coastal villages shows diversity in their economic activities, as tourism and recreation function becomes more and more important in this region. In present-day Cheonsu Bay Region, it is possible to differentiate fishing village cooperatives(FVO) with high potential of sustainable fishery development, FVOs with medium potential, FVOs with low potential on the basis of 14 selected indicators.

• Horticultural Science & Technology
• /
• v.19 no.1
• /
• pp.60-65
• /
• 2001

'Shinil' pear cultivar (Pyrus pyrifolia Nakai) which was originated in a cross between 'Shinko' (non-patented, released in 1941) and 'Hosui' (non-patented, released in 1972) in 1978 was released as a middle season harvest variety. Its usual picking time coincided with 'Chuseok' season which is one of the most famous national holiday in Korea. The fruit showed high soluble solids content and good appearance. The cultivar was preliminarily selected in 1991, and its regional adaptability was evaluated in the name of 'Wonkyo Na-13' at 9 sites for four years from 1992, and finally selected and named in 1995. 'Shinil' is medium in tree vigor like 'Hosui' and spreading in tree habit as 'Niitaka', a leading cultivar in Korea, and consistently very productive. It has high resistance to black rot caused by Alternaria kikuchiana and pear necrotic spot caused by pear necrotic spot virus. Its full bloom is one day earlier than that of 'Niitaka' cultivar and harvest time is September 25 at Suwon area which is 3 days later than that of 'Hosui'. Fruit is round in shape with a deep medium stalk cavity and medium calyx basin and has attractive light yellow brown skin color. The fruit weight ranges between 300 and 400 g, which is similar to 'Chojuro', 'Shinko', and 'Hosui'. Soluble solid content is approximately at the level of 13-14 Brix, which is higher than that of 'Chojuro'. The flesh is cream-white, very juicy, and light grit with soft and fine texture.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.2
• /
• pp.185-192
• /
• 1987

A green house experiment was conducted to find out the acetylene reducing and $N_2$-fixing activity from photosynthetic and aerobic heterotrophic nitrogen fixing microorganisms in submerged paddy soil under different agricultural locality, soil series, soil texture, soil type, and drainage condition in which samples taken from without nitrogen treatment plot of NPK trials on 16 sites of the farmer's field. The results obtained were summarized as follows: 1. The highest acetylene reducing activity was observed at 7 days after incubation in the light condition (photo synthetic microbes+heterotrophic bacteria) while it was observed at 35 days incubation in the dark condition (heterotrophic bacteria). 2. Among the soil series, photosynthetic nitrogen fixing activity was pronounced more in Jangae, Ogcheon and Hwadong series while lower was obtained in Buyong and Daejeong series. Aerobic heterotrophic nitrogen fixing activity was high in Buyong and Daejong series. 3. Estimated amount of $N_2$-fixation from acetylene reducing activity was equivalented to 3.0 mg in light condition and 4.9 mg/100g/105 days in dark condition. 4. Among the agricultural locality, photosynthetic nitrogen fixing activity was high in rather warm southern part while heterotrophic nitrogen fixing activity was predominated more in mountainous area and Chungcheong continental. 5. Photosynthetic nitrogen fixing activity was predominated in high productive soil while aerobic heterotrophic nitrogen fixing activity was pronounced more in crose coarse sandy soil. 6. The soils properties of high photosynthetic nitrogen fixing activity were constituted of poorly or imperfectly drained clay or clay loam soil while heterotrophic nitrogen fixing activity was pronounced more in well to moderately well drained sandy or sandy loam soil.

• 한국사회정책
• /
• v.25 no.3
• /
• pp.37-71
• /
• 2018

Since 2016, public and political interest on basic income has been increased beyond academic interest. The recent debate on basic income has expanded on issues regarding to the concrete implementation of basic income moving further than the debate on conception of the basic income in the abstract level. This study examines major critiques of basic income which was raised from social policy area and makes a counter-argument on these critiques. Major points summarized as follows. First, the problem of jobs and social insurance exclusion is not serious enough to call for basic income. Second, existing social security systems will be crowded out by excessive financial burden if basic income is introduced. Third, policies to cultivate citizens' capacities to cope with a technological change should be given priority over basic income. This study disputes these critiques by counter arguing four points. First, it is necessary to reconstruct welfare state based on basic income, given the labor market changes, such as long-term trend of employment change, newly emerging employment of platform companies, and inconsistency of platform labor and social insurance. Second, hypothesis of crowding-out effect on social security system is just a criticism that can be applied to the basic income initiative of the right-wing. Also, it is unable to find a logical basis or evidence of this hypothesis from the historical process of welfare state development or previous studies. Third, it is necessary to discuss how to reconfigure existing social security system and basic income which are complementary to each other and also have consistency with labor market as a configuration, not as a matter of choosing between basic income and social security system. Fourth, de-laborization does not mean a refusal to labor but a free choice, and the basic principle of social security is not needs but right. In conclusion, in order to develop more productive debate on basic income, it requires more sophisticated discussion and criticism from the point of view of the distributive justice; the debate on the sustainability of social insurance-centered welfare states; and debates on the political realization of basic income.