• Journal of Fashion Business
• /
• v.6 no.5
• /
• pp.96-111
• /
• 2002

The aim of this study was to suggest appropriate factors for production pattern making of women's clothing. Sample pattern designers and production patterners of 13 women's brands were individually interviewed about pattern making process and factors necessary. The results were as follows: The factors to be considered in pattern making were categorized in three groups. 1. Factors to be considered to achieve the correct use of specific materials: elasticity, shrinkage, lining and interlining 2. Factors to be considered to satisfy the design specifications: silhouette, dart distribution, collar and sleeve, trimming 3. Factors to be considered for better sewing quality: skillfulness of the sewer, sewing methods and sewing equipment. 4. Suggestions were made for appropriate factors. A focus-group-interview in pattern design has been interviewed to verify the suggested factors. The factors were presented as a guide to develop the production pattern. 5. For better usage of the factors, standardization were suggested for making process with necessary factors for jacket, skirt.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.126-131
• /
• 2004

The popularity of flat-panel display(FPD), including plasma display panel(PDP) and liquid-crystal display(LCD), has given rise to the need to streamline their production. In these days, PDP is one of the most popular display devices because of its expansion of manufacturing process and simplicity. Bus electrodes, sustain electrodes, barrier ribs and RGB phosphors are patterned on PDP panel to display an image. Since a minute damage on the pattern can cause a serious defect to display, it is important to inspect the pattern precisely. In this paper, an automatic inspection system of repeated pattern in PDP panel has been introduced to find the defect, such as open, short, dirt, island, and so on. And the inspection system has been operated in the mass production line of PDP.

• Journal of the Korean Society of Costume
• /
• v.65 no.2
• /
• pp.62-74
• /
• 2015

The purpose of this research is to analyse the process of development and verification of 'National Competency Standards' of Hanbok production, which was carried out in 2013 for the fashion industry. As the result of this research, the definition of the duty in Hanbok production is 'to conduct a series of step-by-step processes of planning and developing fabric and design, then making pattern, cutting fabric and sewing.' The competency unit for Hanbok production is analyzed in 10 categories: analysis of market trends, design plan, production and manipulation of fabric, production process plan, sample making, pattern making, cutting out, sewing, finishing sewing, inspection of the product quality. Competency unit elements of each competency unit are as follows. 1) analysis of market trends: to research market trend resources, to analyse consumers' buying trend, to analyse industry changes, 2) design plan: to develop design, to plan fabrication, to draw flats, 3) production and manipulation of fabric: to develop fabric planning, to prepare fabric manipulation, to conduct fabric manipulation, 4) production process plan: to grasp design, to plan sewing method, to prepare a specification sheet, 5) sample making: to make a sample pattern, to cut sample fabrics, to sew sample, to finish sample making, 6) pattern making: to measure body, to make production pattern, to adjust production pattern, 7) cutting out: to care fabrics, to lay out patterns, to cut out fabrics, 8) sewing: to sew a garment, to sew a lining, to attach a lining, 9) finishing sewing: to neaten edges, to attach trims, to press to finish, 10) inspection of the product quality: to confirm correspondence with the specification sheet, to inspect appearance.

• The Research Journal of the Costume Culture
• /
• v.14 no.6
• /
• pp.887-899
• /
• 2006

In this study the preference degree of a Dangcho pattern with priority given to demographic variables was examined. The results was that demographic variables have influence on the preference degree of a Dangcho pattern. The continual arrangement pattern of a stylistic type was shown as the pattern that men in their 40s and over most prefer. The continual arrangement pattern of a realistic type was shown as the pattern that men in their 40s and over and women in their 50s and over most prefer. The continual arrangement pattern of a geometrical type was shown as the pattern that men working on a sales, service, production position and women in their 50s most prefer. The single arrangement pattern of a stylistic type was shown as the pattern that college men in their 20s, men in their 50s and women working on a sales, production, service position most prefer. The single arrangement pattern of a stylistic type of a realistic type was shown as the pattern that men in their 40s working on a sales, service, production position and college women in their 20s most prefer. The single arrangement pattern of a geometrical type was shown as the pattern that most of people prefer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.91-102
• /
• 2001

The purpose of this study is to suggest a individually fitted slacks pattern in order to help ourselves prepared for the days of the order-based production like the EC in the apparel industry. A pattern was designed to make the personal fit improved based on the present study and the analysis of the measurements and the body shapes. The main characteristics of this newly designed slacks pattern are as follows. To improve fitting, the pattern requires more detailed data such as front and back waist arc, front and back hip arc, hip depth, the gradient of hip. And for personal fitted pattern, knee girth was established in the proportion to the hip girth and the crotch curve was adjusted to the measurements after drawing and the side seam curve was changed according to the front hip type and the ease in waist and hip was established by the percentage. Slacks pattern was developed into an automatic drafting program. Through the sensory evaluation for the appearance and moving fitness, newly designed slacks pattern was turned out to be improved in personal fit espacially for the body type out of the average.

• Journal of Information Display
• /
• v.10 no.4
• /
• pp.202-205
• /
• 2009

An automated circuit repair system was developed for enhancing the yield of nondefective liquid crystal panels, focusing on the resist patterns on the circuit material layer of thin-film transistor (TFT) substrates prior to etching. The developed system has an advantage over the parallel conventional system: In the former, the repair conditions depend on the type of resist whereas in the latter, the repair parameters must be fine-tuned for each circuit material. The developed system consists of a resist pattern defect inspection system and a pattern repair system for short and open defects. The repair system performs fine corrections of abnormal areas of the resist pattern. The open-repair system is equipped with a syringe to dispense resist. To maintain a stable resist diameter, a thermal insulator was installed in the syringe system. As a result, the diameter of the dispensed resist became much more stable than when no thermal insulator was used. The resist diameter was kept within the target of $400{\pm}100{\mu}m$. Furthermore, a prototype system was constructed, and using a dummy pattern, it was confirmed that the system worked automatically and correctly.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.557-561
• /
• 2011

The study proposes three types of production lead time according to the production or demand pattern. First of all, it discusses the difference of three lead times. While pitch time and cycle time are used in push system with process stock and mass conveyor production, the tact time is used in pull system like as JIT based lean production system.

• Journal of Fashion Business
• /
• v.6 no.5
• /
• pp.87-95
• /
• 2002

The purpose of this study is to survey toddlers' apparel brands in Korea for operation of pattern work rooms, pattern sizes and uses of bodies and measurements, and thereby, provide for some basic data useful to development of toddlers' apparel prototypes and production of bodies. For this study, 13 domestic brands were surveyed. The results of this study can be summarized as follows; As a result of surveying the pattern work rooms, it was found that 53.8% of the sample brands employed a director of pattern work room, while 38.5% of them did not employed any pattern director. 7.7% of the sample brands employed two pattern directors. Such findings suggests that pattern works for toddlers' apparels are neither specialized nor differentiated as for adults' apparels, and therefore, that apparel production is not efficient. In view of the body profiles, only six brands possessed some or other bodies produced in Japan. The average breast size of No. 3 body was found 51.7cm, waist 48.4cm and hip size was 53.7cm. According to National Standard Body Size Survey Report, average breast size of three-year-old toddlers is 51.2cm, The average waist size is 49.5cm, and the hip size is 52.6cm. All in all, our toddlers' sizes are slightly different from Japanese toddlers', and so, it is deemed necessary to produce the bodies for our toddlers' apparels. As a consequence of surveying the measurements used for pattern production, it was found that five brands of the sample brands were using some or other 'body measurements', and another five brands were body measurements and apparel ones in parallel. All the brands sampled were found using some or other 'apparel measurements'.

• Journal of Biosystems Engineering
• /
• v.18 no.1
• /
• pp.71-77
• /
• 1993

This study was conducted in order to figure out the energy consumption pattern in rice production system of Korea, with literature investigation focused on energy requirement in rice production system in worldwide. The investigation reveals that 24,994 MJ/ha was needed to produce 4,500kg of rice production or 5.55 MJ/kg was consumed. The major enegry consumptions are resulted from the application of nitrogen fertilizer, fuel for farm machinery, and farm machinery embodied energy, which showed somewhat different energy consumption pattern than that of the developed country, like, U.S.A. Based on the machinery chosen in this investigation, it was found that 32.7% of the fuel energy, 2,431.8MJ, was consumed in drying operation, 32.2%, 2.402MJ, in tillage and land preparation. 25.8%, 1.923.6MJ in harvest. A linear relationship was found in pre harvest energy input and output of rice production.

• Journal of the Korean Regional Science Association
• /
• v.8 no.1
• /
• pp.119-130
• /
• 1992

Many of the industrialized countries since the 1970s have been experiencing the change in the industrial structure due to technological development, that is, from Fordism to post-Fordism, or to "flexible production system". Regional development has been undergoing some changes according to the different industrial production systems. During the Fordist mass production period, the manufacturing belt was the core region of the production system. As the system shifts to flexible production system of which characteristics are veritcal disintegration, emphasis for JIT(just-in-time) delivery system, part-time and short-time labor contracts, design-intensive industries, etc, the new system requires the new production core and has produced the new industrial spaces, such as Sunbelt cities, suburbs, small-or medium-sized cities, and non-metropolitan areas. In the perspective of global system, the Fordist production system made th NICs developed, because the mass production required many unskilled and low-wage workers. As the NICs exports of manufactured goods have incredibly expanded during the 1970s, the industrialized countries have become threatened. The industriablized countries have restructured their economies and international policies. Such restructures resulted in the economic depression of the NICs. The investment pattern of the industrialized countries has changed and particularly those industries adopting the Post-Fordism have invested from the NICs to the peripheral areas of their own countries or toward the underdeveloped countries which have much lower wage workers. The investment pattern of the NICs is also undergoing some changes like from metropolitian areas to small or non-metropolitan regions. The regional development since the post-Fordist production is still going on, thus it is not possible to generalize the tendency. That could be a particular phenomenon or a stage in the long-term cycle. But the regional development in the world system since 1980s definitely shows the different pattern.t pattern.