• Korean Journal of Environment and Ecology
• /
• v.28 no.3
• /
• pp.326-330
• /
• 2014

Flowering characteristics and acorn production of Quercus acuta were studied in a Quercus acuta forest at Wando island, Korea. Three sample trees were cut and measured to investigate flowering characteristics during flowering season. Eight $20m{\times}25m$ quadrats were set up and three $1m{\times}1m$ seed traps were established within each quadrat to investigate acorn production. There were no significant differences in number of female and male inflorescence per bearing shoot among crown positions, but these values decreased from the upper part to the lower part of crown. The number of female flowers was 5,025 flowers/tree, and of the total number, 60.3% was in the upper part, 28.4% was in the middle part and 11.3% was in the lower part of crown. The number of male flowers was 7,063 flowers/tree and increased from the lower part to the upper part of crown. Acorn production of total 24 seed traps was 947 acorns/$24m^2$, and of total acorn production, 11.0% was sound, 61.9% was damaged, 25.1% was decayed and 2.0% was empty. Monthly acorn production was 240 acorns/$24m^2$ in August, 632 acorns/$24m^2$ in September, 56 acorns/$24m^2$ in October, 17 acorns/$24m^2$ in November and 2 acorns/$24m^2$ in December. Acorns fallen in October showed higher mean length, diameter and weight than those of other months.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.4
• /
• pp.313-318
• /
• 1990

Forty-two outbred female Sprague-Dawley rats weighing 145 g were used to study the effects of a beta-agonist, cimaterol, on growth, body composition and urinary excretion of 3-methylhistidine (MH) at 3, 6 and 18 d. Cimaterol (CIM) was administered in the feed at 10 mg/kg. The growth promoting effect of CIM was most evident during the initial part of the feeding period, followed by a gradual decrease in the magnitude of the response with no significant effect at 18 d. The action of CIM was confined to skeletal and cardiac muscles with no stimulating effect on other organs. The amount of urine excretion and urinary MH excretion was reduced (p<.01) at 3 d in the CIM group. No difference was found at 6 d, followed by an increased urine excretion (p<.05) and MH excretion (p<.01) at 18 d. An inverse relationship between growth rate and urinary MH excretion suggested that the increased growth rate of CIM-fed rats during the initial part of the feeding period is primarily attributed to the decreased protein degradation rate. It was further suggested that both fractional synthesis rate and fractional degradation rate increased during the later part of the feeding period.

• Asian Journal of Innovation and Policy
• /
• v.1 no.1
• /
• pp.1-30
• /
• 2012

The status and functioning of Indian universities is explored in the Indian context from an NSI perspective. Whilst NSI is the main guiding post, the very social and economic context of Indian situation reflect the theoretical underpinning of this paper. The First part serves as a background to knowledge institutions and university sector in India. Basically, it identifies the main actors and agencies of India's NSI, namely, public research system comprising national laboratories, main science and technology agencies and councils and the university system. Given the focus of the paper on Indian universities in a macro historical perspective, the Second part is devoted to trace the growth and structure of university sector in terms of three phases, namely, 1940s to 1980; 1980 to 1990; and the era of liberalization after 1991. The Third part of the paper is devoted to knowledge production and knowledge diffusion. There are some important findings coming out of the quantitative data. It is argued that Indian production of doctorates is falling behind countries like China. Further, Indian universities are yet to achieve Humboltian goal. Finally, the paper has a concluding section which concerns with the current and future challenges facing Indian universities and their role in India's NIS.

• The Journal of Society for e-Business Studies
• /
• v.8 no.4
• /
• pp.53-68
• /
• 2003

Currently, it is possible to buy almost anything from books(Amazon.com) to airplane tickets(Travelocity.com) using the world wide web. The purpose of this research is to develop a "clean interface" between design and fabrication facilities for the production of custom machined parts through Internet. The current mechanism for production of prototype parts that can be fabricated using standard machine tools like milling machines, requires a process of part description preparation, bidding, contract award, and finally fabrication and delivery of the part. This is a substantially more complex process than buying a book or airplane ticket. In this paper, we try to define the ambiguous part description using XML based data exchange format and to enable e-commerce in this field. The research accomplishments are summarized: 1. Creation of a new format for data exchange of machined prototype parts, 2. Development of a prototype system to illustrate how the XML data can be effectively used to conduct e-Commerce for custom machined parts, 3. Testing of the methodology with a number of parts.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.1
• /
• pp.1-13
• /
• 2003

In this paper, LAC(Look-ahead AGV Controller) has been developed for efficient routing of parts in semiconductor and LCD production systems. Several procedures have been developed as sub-modules. LACP(Look-ahead AGV Control Procedure) which controls AGVs using the information on the current and future status of the systems is the main element of the LAC. To support LACP, DSP(Destination Selection Procedure) which determines a destination of a part and AGV call time, SSP(Source Selection Procedure)which selects a part coming next to a buffer when the buffer becomes available. and RTM(Response Time Model) which estimates empty travel time of AGVs and waiting time for an available AGV have been developed. A simulation experiment shows that LAC reduces part's flow time, AGV utilization, average and maximum inventory level of a central buffer, empty travel time of an AGV, and waiting time for an available AGV.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.575-578
• /
• 2008

Currently the automobile parts manufacturing industry of most, it is difficult in the automobile part development and purchase and production management. And when new regulation it will develop this automobile parts and changing design, it is difficult in new registration and history management. Automatic history management and DB construction about automobile parts is in great demand. The purpose of paper is a design of data retrieval and real-time production integration management for automobile parts. Automatic data update is accomplished as input material changing process for design data change and integration management of history information about parts is possible when input the name of an part and the number of an part.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.97-110
• /
• 2005

This paper is the second part of a literature review describing the current status of biomass energy use in the USA. The bioenergy technologies that convert biomass resources to a form of energy were presented, in particular focused on existing coal fired boiler, high efficiency gasification combined cycle. We presented latest biomass power energy supply, economic issues such as its production and plant investment cost in the Part I. In the Part II, our review summarized policy and market issues for electricity consumers, benefits from biomass power which could offer an alternative to conventional energy sources in the form of environmental, rural economic growth, and national energy security in the USA.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.196-201
• /
• 2001

This study reveals the thin sheet metal process with multi-forming die that the name is progressive die, as a pilotless type, also high precision production part is made. They require analysis of many kinds of important factors, i.e. theory and practice of metal press working and its phenomena die structure, machining condition for die making, die material, heat treatment of die components, know-how and so on. In this study, we designed and constructed a multi-forming progressive die as a bending and drawing working of multi-stage and performed through the try out for thin sheet metal. Out of the characteristics of this paper that nothing might be ever seen before such as this type of research method on the all of processes of thin and high precision production part.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.183-188
• /
• 2002

Co-cured composite materials has its own characteristics, so its thermal expansion is different each other. The selection of tool material for co-cured composite part in high temperature more over $350^{circ}F$ and 50 Psi pressure have to consider part thermal expansion, size, shape, and economic aspect in production line. So it is important choose tooling material in manufacturing composite parts. We called the tool for airplane composite parts as BAJ (Bonding Assembly Jig). Composite parts are cured on the BAJ in autoclave. BAJ have to stable at high temperature over $350^{circ}F$ and 50 Psi pressure, Considering composite parts' dimensional tolerance compare to heat up in autoclave. This paper come from the results of the experiment at the composite parts production line and review other aircraft company's method for tooling This is for the engineer engaged in composite parts manufacturing.

• Structural Engineering and Mechanics
• /
• v.51 no.2
• /
• pp.299-313
• /
• 2014

In the first part of this paper, the influences of some of crack parameters on natural frequencies of a cracked cantilever Functionally Graded Beam (FGB) are studied. A cantilever beam is modeled using Finite Element Method (FEM) and its natural frequencies are obtained for different conditions of cracks. Then effect of variation of depth and location of cracks on natural frequencies of FGB with single and multiple cracks are investigated. In the second part, two Multi-Layer Feed Forward (MLFF) Artificial Neural Networks (ANNs) are designed for prediction of FGB's Cracks' location and depth. Particle Swarm Optimization (PSO) and Back-Error Propagation (BEP) algorithms are applied for training ANNs. The accuracy of two training methods' results are investigated.