• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.635-641
• /
• 2008

This study was conducted to investigate the optimal sub-zero temperature for storage of two garlic cultivars, the northern ecotype 'Jaerae' and the southern ecotype 'Daeseo'. These cultivars of garlic bulbs were stored at different temperature (room temperature, $0^{\circ}C$, and $-4^{\circ}C$) conditions after predrying. Southern ecotype garlic showed higher weight loss than northern ecotype garlic. Northern ecotype garlic at $-4^{\circ}C$ exhibited less than 5% of weight loss during 10 month storage. Sprouting rate was higher in southern than in northern ecotype at room temperature storage. The value of injury by disease and insect was similar between southern ecotype and northern ecotype for 5 month storage, and then northern ecotype showed higher value of injury by disease and insect than southern ecotype. Hunter 'b' value of northern ecotype garlic was the lowest at $-4^{\circ}C$ storage. Northern ecotype garlic showed no cold injury at freezing point temperature storage. However, southern ecotype garlic had $0{\sim}5.3%$ cold injury occurrence at $-4^{\circ}C$ storage. Respiration and ethylene production exhibited the highest at room temperature storage, those had the slight increase at $0^{\circ}C$ and $-4^{\circ}C$ storages. Northern ecotype showed higher enzymatic pyruvic acid and fructan contents than those of southern ecotype. Enzymatic pyruvic acid content increased and fructan contents decreased during storage time.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.1
• /
• pp.53-57
• /
• 2009

Heavy metal pollution may be one of the most serious challenges confront crop production and human health. Therefore, the selection of heavy metal tolerance cultivars which adapted to the contaminated fields will introduced a suitable solution for management this critical environmental risk. The objectives of this research is to assess human health risk using geochemical analyses and exposure assessment of heavy metals in rice cultivars. Risk for inhabitants in the closed mine area was comparatively assessed for As, Cd, Cu and Pb in 10 rice varieties as a major exposure pathway. The average daily dose (ADD) of each heavy metal was estimated by analyzing the exposure pathways to rice and soil. For the non-carcinogenic risk characterization, Hazard Quotient (HQ) and Hazard Index (HI) were calculated using toxicity indices provided by US-EPA IRIS. The different rice varieties revealed a wide range of HI values from 23.6 to 34.3, indicating that all rice varieties have a high potential toxic risk. The DA rice variety showed the lowest HI value while the TB rice variety the highest. The probabilities of cancer risk for As via rice consumption were varied with rice varieties ranging from 2.0E-03 to 3.5E-03 which exceeded the regulatory acceptable risk of 1 in 10,000 set by US-EPA. The DA rice variety also showed the lowest value while the TB rice variety gave the highest value. Our results indicate that risk assessment can be contribute to screen the pollution safe rice cultivars in paddy fields affected by the mining activity.

• Journal of Korean Society of Forest Science
• /
• v.110 no.3
• /
• pp.406-418
• /
• 2021

This study was conducted to evaluate optimal storage techniques for bare root plants and container seedlings of Quercus variabilis and Zelkova serrata in order to maintain high quality of seedlings until planting. Refrigerated storage treatments were given at two temperatures (-2℃ [freezing] and 2℃ [cooling]) for nine different durations (0, 15, 30, 60, 120, 180, 240, 300, and 360 days after storage). We analyzed total nonstructural carbohydrate (TNC) content and measured shoot moisture content (SMC) during the storage stage and survival rate (SR) and dry weight during the planting stage of seedlings. The TNC content and SMC of the seedlings of the two species decreased with an increase in storage duration. The TNC content of seedlings rapidly decreased after 180~240 days of storage. The TNC reduction rate in the freezing treatment was lower than that in the cooling treatment. Also, with an increase in the storage duration of the two species, the SMC reduction rate in the cooling treatment increased in comparison with that in the freezing treatment. In both the species, the SR after planting decreased rapidly after 60 days of cooling storage and 180 days of freezing storage, respectively. The SR after planting was less than 60% when the TNC content for both the species dropped below 20 mg g^-1. In addition, the SR was lower than 80% when SMC measured before storage decreased by approximately 30% and 20% for Q. variabilis and Z. serrata, respectively. Our results suggest that cooling (1~2℃) storage is recommended for a short-term period (2 months or less), whereas freezing (-2~-4℃) storage is suitable for longer periods (2~6 months). These optimal storage techniques, allied with seedling harvesting and handling systems, will improve the quality of seedling production in nursery stages and increase seedling growth performances in plantations.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.5
• /
• pp.31-47
• /
• 2021

The purpose of this study is to demonstrate the moderating effect of technology development activities in the relationship between independent variables such as entrepreneurial orientation and technology innovation capabilities and dependent variables. As a result of analyzing the causal relationship between research variables, it was found that the higher the innovation and initiative among the sub-factors of entrepreneurial orientation, the more positive the technical commercialization performance and product completion. Among the sub-factors of entrepreneurial orientation, risk-taking was found to have a significant effect only on product completion. It was found that the higher the technology commercialization capability and technology convergence capability, the higher the technology commercialization performance, the technology commercialization performance. As a result of analyzing the moderating effect of technology development activities, it was found that technology development management ability, a sub-factor of technology development activities, controls the influence relationship between innovation and risk sensitivity and technology performance. In addition, it was found that the involvement in technology development planning controls the influence relationship between technology convergence capability and technology performance among sub-factors of technology innovation capability. Based on the above analysis results, this study made three suggestions as follows. First, the achievements of technology commercialization to achieve the superiority of corporate competition depend on progressive innovation and risk-taking based on entrepreneurial orientation. It is necessary to find a way to build entrepreneurial orientation from within the organization. Second, due to the nature of the ICT industry, which has a fast pace of technological development and changes in market acceptance, technology commercialization performance will be positive when the capabilities, technology, knowledge, and resources that can quickly lead to product production can be organically linked. Finally, corporate CEOs need to further promote innovation and risk-taking through phased and continuous research activities for technology development. In addition, it is necessary to establish a corporate culture that tolerates various strategies and failures so that understanding of technology convergence can lead to technological performance.

• Korean Journal of Food Science and Technology
• /
• v.53 no.4
• /
• pp.382-390
• /
• 2021

In this study, solubilized yuzu pulp powder (EYP) was produced using enzyme treated yuzu pulp powder (YP) and used to manufacture yuzu granules (0-20% EYP content). The physicochemical, product stability, and functional properties of Yuzu granules were compared among five enzyme treatments. Among the five treatments, CL had the highest YP solubilization yield (48.68%). Microstructural observation of EYP using FE-SEM revealed that its surface became irregular and porous after enzymatic treatment. Compared to YP, EYP had 2 times lower insoluble dietary fibers and 3 times lower hemicellulose and cellulose content. Among the yuzu granules, IV (yuzu granules with 15% EYP) had an excellent water and oil holding capacity and flowability. IV granule had the highest narirutin and hesperidin content of 3.4 mg and 2.2 mg/g DW, respectively and the highest antioxidant (68.4%) and tyrosinase inhibitory activities (82.5%). Therefore, EYP or granule with EYP can be used as a functional component in food industry or pharmaceutical field.

• Journal of vocational education research
• /
• v.36 no.2
• /
• pp.95-121
• /
• 2017

The vocational competency development training teacher must complete the training course for the training of vocational competency development training instructor and get the qualification of the vocational competency development training teacher from the Ministry of Employment & Labor with the criteria set by the Presidential Decree. Therefore, it can be said that H_university 's educational performance, which is the only vocational competency development training teacher in Korea and that plays a role of mass production in the labor market, has a great influence on vocational competency development training. The purpose of this study is to identify the problems through the analysis of actual condition of vocational competency development training education based on CIPP model, Furthermore, it was aimed to suggest improvement plan of qualification training education. In order to accomplish the purpose of the research, the present situation of the training course for the vocational competency development training teacher training students was grasped. And We conducted a survey to draw out the improvement plan and utilized the results of 173 copies. We conducted interviews by selecting eight subjects for in-depth analysis and Understand the details of the results of the surveys conducted. As a result of the study, positive responses were obtained from the educational objectives and educational resources in the context factors. On the other hand, there were negative opinions about the curriculum reflecting the learner and social needs. In the input factors, positive opinions were derived from the educational objectives and training requirements. However, there were many negative opinions about the achievement of the learner's educational goals. In addition, there were many negative opinions of online contents education. In the process factors, positive evaluation was high in class related part, learner attendance management, and institutional support. However, negative opinions were drawn on the comprehensive evaluation of qualification training period, and the learner's burden due to lack of learning period appeared to be the main reason. In the factor of calculation, Positive opinions were derived from the applicability of the business curriculum for training courses for training teachers who are in charge of education and training in industry occupations. However, there were negative opinions such as learning time, concentration of learning, and communication of instructors. Based on the results of the study, suggestions for improving the operation of vocational competency training teacher qualification training are as follows. First, it is necessary to flexibly manage the training schedule for the weekly training course for vocational competency development training teachers. Second, it is necessary to seek to improve the online education curriculum centered on consumers. Third, it is necessary to seek access to qualification training for local residents. Fourth, pre - education support for qualified applicants is required. Finally, follow-up care of qualified trainees is necessary.

• Journal of Industrial Convergence
• /
• v.1 no.1
• /
• pp.41-70
• /
• 2003

Many researches on brand equity have been focused in definition about it, factors of it, and the process of formation. Most of them have been used by voluntary production category, as is durable goods or nondurable goods. But this study, using the model is developed by Foote, Cone & Be1ding(FCB) Company, classified four fields, high-low involvement, rationality(rational or sensitive) involvement. The selected goods is a sensitive high involvement(casual wear). This study investigate the effects of brand equity and search the influences of brand equity formation according to factors of marketing mix. To this goals, this study kept a literature survey and a demonstrative research. In literature survey, there are several definitions of brand and brand equity. The research model is derived from selected factors of marketing mix and former study. This study used the regression analysis to verify effects from brand equity through the selected marketing mix. The research data is collected from the capital area. The focus of this study is effects of brand equity according to marketing mix. The followings are results and suggestions of this study. First, in the price factors, the affirmative effects are revealed the perceived quality and the brand awareness in a rational high involvement goods, the perceived quality and the brand associations in a sensitive high involvement goods, all factors of brand equity in a rational low involvement goods, and the perceived quality in a sensitive low involvement goods. As summary, the important characteristics is the price factors to consumers, and consumers recognize that a high price means a high quality. Second, in the store image factors, the affirmative effects are revealed all brand equity factors in a rational high involvement and a sensitive high-low involvement. A good store image incites more interest, contact, and visit from potential consumer. And such store offers more consumer satisfaction, simulates more active and positive conversation to consumers. Third, in advertising spending factors, the affirmative effects are revealed the brand awareness and associations in a rational high involvement and a sensitive high involvement, all brand equity factors in a rational low involvement and a sensitive low involvement. An advertisement increases not only a brand awareness but also strong brand associations. Forth, in price promotion factors, the affirmative effects are revealed the brand associations in a rational high involvement, the negative effects are revealed all brand equity in sensitive high involvement. According the result about the effects of brand royalty through the brand equity factors, a perceived quality and brand associations have positive effects to brand royalty in all factors. Consumers choice a deep perceived quality than other competitive brand. So, brand equity will increase according to a qualitative grade of a perceived brand by consumers. Brand associations represent a quality and a degree of involvement. In conclusion, brand associations and equity have a positive relation each other. According to the analysis results about a brand royalty of selected marketing mix factors, the affirmative effects are revealed the store image and price promotion factors in a rational high involvement, the price and store image in a sensitive high involvement, and the price and advertising spending in a rational low involvement. The results about the affect of selected marketing mix factors according to brand equity, are the perceived quality in a high involvement, and all brand equity factors in a low involvement. The affirmative effects about a store image are revealed all equity factors in high-low involvement. In advertising spending factors, the affirmative effects are revealed the brand awareness and associations in a high involvement goods, and the perceived quality and the brand awareness in a low involvement goods. In price promotion factors, the affirmative effects are revealed the brand awareness in a low involvement goods, and the negative effects are revealed the brand awareness in a high involvement goods. According to a degree of involvement, the results of a brand royalty through a brand equity factors are following. The affirmative effects are revealed the perceived quality and the brand royalty in a high involvement goods, and the brand awareness are revealed a negative effect. The affirmative effects are revealed the perceived Quality and the brand associations in a low involvement goods. So, in a high involvement goods, the brand royalty is built by strong brand associations, but, in a low involvement goods, the brand royalty is built also by a perceived Quality and a brand awareness. This study have some concept of limitation. So, this study presents a future direction of research. First, a future study has to have more deep analysis for this study analyzed through a limited marketing mix factors. Second, a future research has to get mutual effects about brand equity of marketing mix factors for this study has an individual marketing decision factors. Third, for the future, a brand equity needs a research about a several goods such as services, profit or nonprofit, industrial products, culture, and so on. Forth, the research have to diversify a various data for population.

• Journal of Bio-Environment Control
• /
• v.28 no.1
• /
• pp.66-77
• /
• 2019

The present study investigated pine trees, which forms a major plantation species in Korea, with the objective of improving the survival rate of pine trees after planting. Growth responses and characteristics were assessed by controlling the level of fertilizer application, which is a basic controlling the growth of pine seedlings, to identify the optimal fertilization treatment. Pine tree seedlings were grown in 104 containers and were examined 8 weeks after planting. Stem height and were measured at 4-week intervals. In terms of fertilization treatment for 1-0 pine seedlings, the treatment group with gradually-increasing fertilizer concentration ($500{\rightarrow}1000{\rightarrow}1000{\rightarrow}1000mg{\cdot}L^{-1}$) had the biggest increase in stem height and diameter at the root. The survey results indicated that the increased concentration treatment group and the gradually-increasing concentration treatment group had more growth compared with that in the fixed concentration treatment group. The gradually-increasing concentration treatment group ($500{\rightarrow}1000{\rightarrow}1000{\rightarrow}1000mg{\cdot}L^{-1}$) had the highest total dry matter production. Nine weeks after fertilization, the tips of the pine leaves turned yellow in the fixed concentration treatment group ($3000mg{\cdot}L^{-1}$). The same phenomenon was observed in the treatment group in which the concentration was increased to $2000mg{\cdot}L^{-1}$, and in the gradually-increasing concentration treatment group, when the concentration was raised up to $2000mg{\cdot}L^{-1}$. We concluded that the optimal fertilization conditions for producing healthy pine 1-0 seedlings involve fertilizing once a week with Multifeed 19 at $500mg{\cdot}L^{-1}$ during the seedling period, Multifeed 19 at $1000mg{\cdot}L^{-1}$ during the rapid growth period, and Multifeed 32 at $1000mg{\cdot}L^{-1}$ during the maturation period.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.848-857
• /
• 2018

Recently, around the world, active development of new renewable energy sources including solar power, waves, and fuel cells, etc. has taken place. Particularly, floating offshore wind farms have been developed for saving costs through large scale production, using high-quality wind power and minimizing noise damage in the ocean area. The development of floating wind farms requires an evaluation of the Maritime Safety Audit Scheme under the Maritime Safety Act in Korea. Floating wind farms shall be assessed by applying the line and area concept for systematic development, management and utilization of specified sea water. The development of appropriate evaluation methods and standards is also required. In this study, proper standards for marine traffic surveys and assessments were established and a systemic treatment was studied for assessing marine spatial area. First, a marine traffic data collector using AIS or radar was designed to conduct marine traffic surveys. In addition, assessment methods were proposed such as historical tracks, traffic density and marine traffic pattern analysis applying the line and area concept. Marine traffic density can be evaluated by spatial and temporal means, with an adjusted grid-cell scale. Marine traffic pattern analysis was proposed for assessing ship movement patterns for transit or work in sea areas. Finally, conceptual design of a Marine Traffic and Safety Assessment Solution (MaTSAS) was competed that can be analyzed automatically to collect and assess the marine traffic data. It could be possible to minimize inaccurate estimation due to human errors such as data omission or misprints through automated and systematic collection, analysis and retrieval of marine traffic data. This study could provides reliable assessment results, reflecting the line and area concept, according to sea area usage.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.179-222
• /
• 2005

Studies prosecuted on relics in those 17 bronze workshops that have been thus far excavated show that these workshops may be roughly classified into a royal workshop, a state-operated workshop and a private workshop depending upon by whom they were operated. Workshops in the Gyeongju area developed from a small royal handicraft manufacturing to a large state-operated handicraft manufacturing scale, and then later on gradually changed to a private handicraft manufacturing industry. The royal bronze workshops were operated in a small scale, as shown from the relics excavated at Wolseong(月城), Imhaejeonji(Anapji:雁鴨池) and their neighborhood places around Hwangnam_dong(皇南洞). The state-operated bronze workshops are concentrated upon one point around Dongcheon-dong(東川洞), Gyeongju city. On the other hand, in the state-operated workshop stage, a broad street was built by a workshop, which is presumed to aim to thoroughly transport materials needed for the workshop. And the point that wastes from bronze workshops were used for road repairs indicates that road repair works were carried at the bronze workshops near the road. The private workshop as a new type of workshop was operated by the aristocracy. For that purpose, craftsmen belonging to state-operated workshops or individual artisans were absorbed into the aristocracy-operated workshops. These types of workshops were pervaded throughout the city. When private workshops came to emerge in the houses of the aristocracy, the operating subjects of workshops began to change from state-operated to private workshops. Temple workshops were located at a Buddhist temple within the Court and directly produced things needed for the court, including bronze foundries. As aforementioned, through the presence of bronze workshops operated in the Silla Court, we can identify the relationships between their technical level and trading areas and among their origin, supply and demand sources, along with phases of social life in those days.