• Preventive Nutrition and Food Science
• /
• 제7권1호
• /
• pp.37-42
• /
• 2002

Factors affecting the production of bacterial cellulose and organic acids in Kombucha fermentation were investigated. Kombucha was obtained by the fermentation (for 12 days at 3$0^{\circ}C$) of the green/black tea extract, supplemented with 10% white sugar, using an Oriental tea fungus as starter. Hitgher initial pH increased acid production with decreased cellulose production. With a cellulose pellicle or tea fungus broth as a starter, a 1~3 mm thick cellulose layer developed as a top layer every four days, and was removed subsequently while continuing fermentation. Addition of 30 mL tea fungus broth (13%, v/v) in Kombucha fermentation resulted in maximum production of a cellulose pellicle, indicating weak acid production. Yield of cellulose production at an early stage of fermentation was also higher when Kombucha was inoculated with a cellulose pellicle. In fact, addition of 1% (v/v) alcoholic beverage in the Kombucha fermentation activated the cellulose production, coupled with four times higher acid production.

• 디지털산업정보학회논문지
• /
• 제9권4호
• /
• pp.167-175
• /
• 2013

This study is the process of making high-definition TV broadcast color correction affects the end result comparison is focus on implement through study. In the production process and the impact on the color Correction in the video as an study for UHD, 4K, 6K video production workflow improvement of an effective program in the present and time and cost in the post production process, color correction for the final video through the production and overcome the failure of further in-efficient color correction study will help you to solve the problem. This study is the color changes over the course of the final video to see how much influence color correction of post-production. Color correction using a program of courses in Visual quality, regularly presented the possibility to retain and make on high definition video production post-production process for color correction method is utilized as the basis of study.

• International journal of advanced smart convergence
• /
• 제7권4호
• /
• pp.138-146
• /
• 2018

Generally, the animation and image production process consists of three stages: Pre-Production, Main-Production, and Post-Production. Real-time video production is also made based on this configuration. On the premise of the increase of productivity by reducing the production time effectively in the main production stage that takes the most time, this study aims to summarize the process of producing videos, focusing on the concrete main production stage. To do this, we propose a method for creating a real-time image from the point of view of the general user using Unity 3D, one of the game engines. Also, this study utilizes the Cinemachine feature provided by Unity 3D, which is suitable for the implementation of the proposed module structure.

• 산업공학
• /
• 제16권2호
• /
• pp.185-194
• /
• 2003

This paper deals with a realistic production scheduling under a make-to-order production environment. The practical case is studied on the transformer winding process in the 'H' company. The transformer winding is a process that rolls a coil that is coated with an electric insulation material in order to generate the required voltage using the voltage fluctuation. This process occupies an important position among the production processes in the transformer manufacturing company. And this process is composed of parallel machines with different performances according to the voltage capacity and winding type. In this paper, we propose a practical heuristic algorithm for production scheduling to satisfy the customer’s due date under a make-to-order production environment. Also, we implement the production scheduling system based on the proposed heuristic algorithm. Consequently, the proposed heuristic algorithm and the implemented production scheduling system are currently working in the transformer production factory of the ‘H’ company.

• Journal of Biosystems Engineering
• /
• 제43권1호
• /
• pp.37-44
• /
• 2018

Purpose: The objective of this study was to investigate the high-efficiency anaerobic digestion of organic wastes with high fat content. Specifically, the analysis focused on biogas production performance with a focus on carbon number and the double bond count of the long-chain fatty acids (LCFAs), which are hydrolysis products of triglycerides. Methods: Experiments were performed under mesophilic anaerobic conditions with a feed-to-microorganism ratio (F/M) of 1.0. Biogas production performance was analyzed through biogas production patterns, lag-phase, and the time required for 90% biogas production (T90). Results: Biogas production increased when the content of unsaturated LCFAs (containing relatively large numbers of carbon atoms) increased. In substrate containing LCFAs with four or more double bonds, although the initial lag-phase in biogas production was shortened, development of a three-step lag-phase resulted in decreased biogas production. These results suggest that high rates of anaerobic digestion are possible when the LCFAs have high unsaturated fatty acid content with three or fewer double bonds. Conclusions: When various types of LCFAs are digested anaerobically, biogas production performance can be improved if the unsaturated fatty acid content and number of double bonds are optimized for maximum production.

• Journal of Forest and Environmental Science
• /
• 제32권2호
• /
• pp.173-181
• /
• 2016

This study designed a model of the efficient production schemes and raw materials transportation optimization of current South Korean's simple and monolithic distribution system of wood to build a SCM (supply chain management) as a basic level to establish a distribution of future by pellet production of raw materials costs and reduce transport costs, and specifically to forest of pallet to contribute to revitalizing the market. The result of each transportation costs after building the best transportation network from raw material supply area to demand area applying transport law was 964,600 thousands Won from 6 supply areas to 7 demand areas. And the result of each model's analysis to get the pellet's efficient production through production cost reduction showed that it reduced from 325,701 Won/t to 240,106 Won/t, results of existing efficient pellet for the production model 8,233 tons over 20,000 tons annual production capacity from the size of the expanded production capacity when the expansion. However, when the production size expanded to 50,000 Tons of the production, the effect was very small even though production cost decreased.

• 한국수소및신에너지학회논문집
• /
• 제17권2호
• /
• pp.218-226
• /
• 2006

It can be obtained from hydrocarbon and water, specially production of hydrogen from natural gas is most commercial and economical process among the hydrogen production methods, and has been used widely. However, conventional hydrogen production methods are dependent on fossil fuel such as natural gas and coal, and it may be faced with problems such as exhaustion of fossil fuels, production of greenhouse gas and increase of feedstock price. Thermochemical hydrogen production by nuclear energy has potential to efficiently produce large quantities of hydrogen without producing greenhouse gases. However, nuclear hydrogen must be economical comparing with conventional hydrogen production method. Therefore, hydrogen production cost was analyzed and estimated for nuclear hydrogen as well as conventional hydrogen production such as natural gas reforming and coal gasification in various range.

• 산업공학
• /
• 제14권1호
• /
• pp.9-19
• /
• 2001

Production planning and control system plays an important role in manufacturing companies because it determines all production capacity planning, material procurement planning, and production scheduling which are needed in the process of producing products. Many researches on production planning and control system have been conducted for many manufacturing companies for recent decade. But, a considerable research achievement has mainly been obtained on the forecast-driven production for a make-to-stock and an assemble-to-order. The reason is that there are some hardships such as difficulties of standardizing product information, the frequent changes of design and material, and the unexpected dynamic events that influence the production of customer's order in a make-to-order or an engineering-to-order environments. By these characteristics and their complexities, some studies for production planning and control system in a make-to-order environment are presented recently. In this paper, we present the framework of the hietachical production planning and control for a make-to-order environment with dynamic events. In order to illustrate the usefulness of the proposed framework for a hietachical production planning and control, the information system for a make-to-order production was implemented with the object of the company of producing electricity transformer.

• 말소리와 음성과학
• /
• 제13권1호
• /
• pp.25-36
• /
• 2021

This study examined the perception and production of eight English fricatives /f/, /v/, /θ/, /ð/, /s/, /z/, /ʃ/, and /ʒ/ by thirty Chinese English majors and thirty Chinese middle school students through a fricative identification test, an intelligibility test, and a goodness rating test and focused on error patterns and the perception-production relationship. The results showed that substitution errors occurred frequently in the perception and production of English fricatives by both the English majors and the middle school students. Further, the error patterns were attributed to various influencing factors such as the negative transfer from Chinese consonant inventory, hypercorrection or overcompensation mistakes, deficiency of L2 teaching, and acoustic similarities. Significant overall correlations were found between the fricative perception and production by the two subject groups but were not manifested in all the eight fricatives, indicating that Chinese learners' perceptual competence of target fricatives was not necessarily tied to their productive excellence of those sounds in all cases. Furthermore, precedences of perception over production were incompletely manifested in the eight fricatives, which suggested that perception might not always be a necessary prerequisite for production. Additionally, subject group and vowel context differences were observed. The English majors performed better than the middle school students, both perceptually and productively, and the subjects' performances in perception and production varied when vowel contexts changed.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1288-1294
• /
• 2022

Hydrogen as an environmentally friendly energy carrier has received special attention to solving uncertainty about the presence of renewable energy and its dependence on time and weather conditions. This material can be prepared from different sources and in various ways. In previous studies, fossil fuels have been used in hydrogen production, but due to several limitations, especially the limitation of the access to this material in the not-too-distant future and the great problem of greenhouse gas emissions during hydrogen production methods. New methods based on renewable and green energy sources as energy drivers of hydrogen production have been considered. In these methods, water or biomass materials are used as the raw material for hydrogen production. In this article, after a brief review of different hydrogen production methods concerning the required raw material, these methods are examined and ranked from different aspects of economic, social, environmental, and energy and exergy analysis sustainability. In the following, the current position of hydrogen production is discussed. Finally, according to the introduced methods, their advantages, and disadvantages, solar electrolysis as a method of hydrogen production on a small scale and hydrogen production by thermochemical method on a large scale are introduced as the preferred methods.