• 한국해양공학회지
• /
• 제11권3호
• /
• pp.200-211
• /
• 1997

Most recently, offshore Engineering & Construction field is concerned about integration management technology such as CIM(Computer Integrated Manufacturing), PDM(Product Data Management) and Enterprise Information Engineering in order to cope with the rapid change of engineering and manufacturer specification as per owner's requirement during construction stage of the project. System integration and integrated data modeling with relational database in integration management technology improve the quality of product and reduce the period of the construction project by reason of owing design information jointly. This paper represents the design methodology of system integration using Business Process Reengineering by the case study. The case study is about the offshore plant material information process from front end engineering design to detail engineering for the construction and the basis of monitoring system by integrating and sharing the design information between the 2D intelligent P&ID and 3D plant modeling using relational database. As a result of the integrated data modeling and system integration, it is possible to maintain the consistency of design process in point of view of the material balancing and reduce the design assumption/duration. Near future, this system will be expanded and connected with the MRP(Material Requirement Planing) and the POR (Purchase Order Requisition) system.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.317-318
• /
• 2013

국제수로기구(IHO)에서는 항해안전을 위한 다양한 수로데이터 사용을 지원하기 위해 범용수로데이터모델 S-100 표준을 간행한 바 있으며, 이러한 S-100표준은 레지스트리(등록소) 개념 도입을 통해 보다 다양한 수로분야의 데이터 관리 및 폭넓고 다양한 응용분야로의 적용이 가능하게 되었다. 본 연구에서는 우수하고 체계적인 S-100표준을 활용하고 국제수로분야에 기여하기 위해 해사안전분야에 관한 S-100기반의 제품표준을 시범적으로 개발하여 공통피쳐모델에 따른 응용스키마를 설계하였고 이를 간이용 레지스트리에 등록하여 피쳐 카탈로그를 생성하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.810-814
• /
• 2002

According to the image level definition for KOMPSAT-2 in KOMPSAT-2 Ground Station Specification, the level 0 is frame formatted, unprocessed data at full resolution; any and all communications artifacts (e.g., synchronization frames, communications headers) removed. The level 0 is used for two purposes: 1) exchange of imagery between image receiving & processing element (IRPE), and 2) image transfer from the Receiving & Archiving Subsystem to Search & Processing Subsystem. On-board processing of imagery data of KOMPSAT-2 includes JPEG-like compression and encryption besides conventional CCSDS packetization. The encryption is used to secure imagery data from any intervention during downlink and compression allows real-time downlink of image data reducing data rate produced from the camera. While developing ground receiving system for KOMPSAT-2, it was necessarily to define level 0 products. In this paper, we will suggest level 0 product definition for KOMPSAT-2 and explain reasons of the decisions made. The key factor used while defining the level 0 products is the efficiency of whole ground receiving system. The latter half of the paper will explain the implementation of software that generates level 0 products. The necessary steps to produce level 0 products will be explained, and the performance achieved will be presented.

• 한국의상디자인학회지
• /
• 제25권3호
• /
• pp.17-29
• /
• 2023

This study collected and analyzed reference information on the size labeling method and size of clothing products in 13 online shopping malls for plus size women in their 20s and 30s, and compared the size specification information focusing on jeans. First, in the results of examining the method of clothing size designation, clothing sizes indicated by 1, 2, 3 or physique designation (M, L, XL) differed between shopping malls, and even in the same shopping mall, even if the same size notation was used. Most the clothing sizes were different depending on the type of clothing. For bottoms, it was found that one company used seven size designation methods at the same time, two shopping malls used four size designation methods, and five shopping malls used three size designation methods. In the meantime, in the results of comparing the size specifications of jeans XL (size 88, 32 inches) by product part, for waist and hip circumferences, each of the eight companies showed that the size was smaller than the body size suggested by KS adult women's wear.

• Journal of Mechanical Science and Technology
• /
• 제14권1호
• /
• pp.65-71
• /
• 2000

Mold cavities of gears should be made larger than the product specification since plastics shrink when changing from a molten to a solid state. For injection molded spur gears, two design methods for the compensation of shrinkage are widely used. One is the module correction method and the other is the pressure angle correction method. Both methods are based on the assumption that shrinkage occurs toward the center of a molded gear. This paper deals with the shrinkage rate and proposes a method of designing gear cavity derived from the measured shrinkage rates which govern the outside diameter, the tooth depth and the tooth thickness of a molded gear. The proposed method imposes no restriction on the shrinkage direction and provides a cavity with all of the fundamental gear design parameters.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2005년도 GIS/RS 공동 춘계학술대회
• /
• pp.53-58
• /
• 2005

21세기 지식정보화사회로 접어들어 GIS가 부각됨에 따라 GIS의 활성화를 위한 기본지리 정보에 대한 중요성이 대두되고 있다. 기본지리정보를 관리 감독하는 국토지리정보원에서는 2000년부터 기본지리정보구축에 관한 연구 등을 수행하여, 기본지리정보의 범위 선정과 데이터모델 표준화가 이루어 졌으며, 기본지리정보 유통과 구축에 필요한 생산사양이 이루어짐에 따라 기본지리정보의 품질 및 활용성에 대한 검토가 필요한 실정이다. 본 연구에서는 시설물분야 기본지리정보 생산사양에 따른 기본지리정보를 3단계에 걸쳐 구축하였으며 기 구축된 교통, 수자원, 행정경계 기본지리정보와 통합하여 활용성 평가를 수행하였다.

• Journal of electromagnetic engineering and science
• /
• 제5권2호
• /
• pp.97-103
• /
• 2005

This paper describes the measured results of sonobuoy transmitting antenna system for anti-submarine warfare (ASW). Since radiation pattern and power density depend on impedance matching between transmitting RF part and antenna with termination resistance, design of matching circuit is very important for sonobuoy system performance. Matching circuit is designed by Smith chart using control of L and C. In standing wave ratio(SWR) measurement using Network Analyzer, SWR of antenna with matching circuit observed 1.5 below at the assigned VHF band. It shows very excellent performance comparison with conversional product that is used for the same object. The measured vertical and horizontal radiation patterns are also shown the satisfaction of military specifications. A drop out of sonobuoy system on the sea is happened when angle of elevation direction is over 10 degrees, and it is conformed that it takes less than I second return to original signal level. The required electric power density is $83\;mW/m^2$ in the military specification, and measured electric power density is observed over average $110\;mW/m^2$ at all frequency bands.

• 한국건축시공학회지
• /
• 제2권2호
• /
• pp.157-164
• /
• 2002

In this study, attempts to analyze the case study of production design were carried out through: 1) exploration of the factors influencing the interface between architectural and production design phases; 2)application of precast technologies. Building design and construction planning in Japan may be characterized by ample use of Production Design which extends over the whole projects phases. Taking a composite construction system for apartment buildings which allow for alternative combination of different technologies as a case study object, three projects have been chosen to analyze actual process of determining product sub-system and their specification. And the expectancies of this paper are that it can be used as efficient data for improvement of system to systematize Constructability(Buildability) in korea.

• 한국기술사회:학술대회논문집
• /
• 한국기술사회 1984년도 제14회 한일기술사 합동 심포지움 참관기
• /
• pp.84-91
• /
• 1984

Heavy Residual Fuel oils is a mixture of reduced crude from crude unit, bottom products from vacuum and/or catalytic cracking unit with distillate to meet the specification and generally used as Heavy Fuel Oil for large combustion engines, boilers, etc…. But this study was made to investigate Heavy Residual Fuel oils for using as industrial raw material and resulted the following possibilties as valuable raw material as well as Heavy Fuel Oil. 1) Production of straight asphalt through vacuum distillation unit. 2) Using straight asphalt from vacuum distillation unit for manufacturing of Blown Asphalts, Cut Back Asphalts, Emulsified Asphalts and Asphalt Compound, etc…. 3) Using waxy oil side streams for manufacturing of raw oil to be Lube Oil base stocks through solvent dewaxing. 4) Production of lube base oils from dewaxed raw oil through chemical treatments. 5) Manufacturing of paraffine wax from slack wax to be produced as by product of dewaxing process.

• 조명전기설비학회논문지
• /
• 제26권11호
• /
• pp.97-103
• /
• 2012

The basic processing unit for instant ramen noodles includes mixing, rolling, boiling, frying, cooling, and packing processes. For uniform thickness of dough sheets in rolling process, the roll-gap in rolling process needs to keep uniform thickness of flour sheets in spite of different kinds of raw materials. In this paper, we have developed a roll gap adjustment system using a PLC (Programmable Logic Controller) with a touch panel and an AC servo-mechanism to make dough sheets with a good gluten starch-network structure and uniform thickness and to contribute to process standardization by transferring from tacit knowledge of skilled workers to explicit knowledge. The developed system can adjust the roll gap in units of 0.01mm and correspond to various product items which have different thickness specification by recalling the presetting values of the desired thickness from database.