• 대한기계학회논문집B
• /
• 제28권4호
• /
• pp.415-424
• /
• 2004

Cooling the electronic equipment is one of the major focal points of the design process and the key to successful product launch. The two-phase loop thermosyphone which is a good candidate among many available options was investigated fur cooling of the high power amplifiers. The system is composed of evaporator which contains 6 parallel cold plates, fan cooled condenser, gas-liquid separator, and interconnecting tubes. Experiments were performed for several refrigerant charging values, hs and as a experiment result, the optimum charging value fur this system was proposed. In order to optimize the system design, the operating cycle pressure and inlet/outlet temperatures of evaporator and condenser are measured and analyzed. The effect of the three parameters such as flow rate and temperature of condenser cooling air, and thermal load on the evaporator are investigated. The lower the operating pressure and the cycle temperatures are also better to prevent the leakage of the system. The system invesigated in this paper can be directly used for cooling of a real unmanned wireless communication station.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.243-246
• /
• 2008

목질계 바이오매스 가스화 발전에 있어서는 가스화 가스중에 함유되어있는 타르를 가능한 한 가연성 가스로 전환하여 냉가스효율을 향상시키는 것 및 잔유하는 타르는 후단기기에 악영향을 초래할 우려가 있기 때문에 타르를 저감 제거하는 것이 바람직하다. 본 연구에서는 공기 수증기를 사용하여 타르개질 프로세스의 개선을 위해서 타르에서 가스성분으로의 전환에 관한 개질 실험을 실시하여 Wood chip 타르의 열분해 개질 생성물 거동에 대하여 검토하였다. Wood chip 열분해로 생성된 타르의 원소분석 및 $^1H$ NMR분석의 결과로 타르를 치환기를 가지지 않는 방향족, alkyl-기를 가지는 방향족, 산소 함유 방향족, 지방족의 4개로 분류하였다. 개질제에 의해 경질 타르, 중질 타르 모두 감소하였다. 개질 공기는 타르를 연소시키지만 그 속도는 가연성 가스와 경합하고 $900^{\circ}C$에서는 타르의 연소는 나타나지 않았다. alkyl-기를 가지는 방향족은 메탄과 치환기를 가지지 않는 방향족으로 전환되고, 치환기를 가지지 않는 방향족은 수소와 soot로 전환되고, 산소 함유 방향족은 일산화탄소와 치환기를 가지지 않는 방향족으로 전환되는 것을 알았다. 또한, 개질제에 의해alkyl-기를 가지는 방향족, 치환기를 가지지 않는 방향족, 산소 함유방향족 모두가 일산화탄소,이산화탄소로 전환되는 것을 알았다.

• Natural Product Sciences
• /
• 제10권2호
• /
• pp.55-58
• /
• 2004

The fruit and seeds of Butea monosperma (Lam) Kuntze (Fabaceae) are useful in piles, anthelmintic, eye diseases, and inflammation in the Indian system of medicine. Hence, we have evaluated the anti-inflammatory activity of the fixed oil, mixed fatty acids, and unsaponifiable matter of B. monosperma against carrageenan-induced paw oedema and cotton pellet-induced granuloma in rats. The fixed oil, mixed fatty acids, and unsaponifiable matter of the oil exhibited significant anti-inflammatory activity on the tested experimental animal models. The unsaponifiable matter of the oil produced higher protection compared to fixed oil and mixed fatty acids. Phytochemical analysis of the fixed oil revealed the presence of steroids and terpenoids while unsaponifiable matter of the oil showed the presence of ${\beta}-sitosterol$. Also, four fatty acids were identified in the fixed oil by gas liquid chromatography. The anti-inflammatory activity of the fixed oil may be due to unsaponifiable matter or combination of unsaponifiable matter and mixed fatty acids.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.199-202
• /
• 2002

Many methods have been developed for the remediation of contaminated soil and groundwater. Among those technologies, in-situ bioremediation is most likely to be cost-effective method for petroleum hydrocarbon contamination. But the in-situ bioremediation can require more time to remediate hydrocarbon-contaminated soil and groundwater than other methods. Therefore we intended to save time of in-situ bioremediation using a biological additive to activate indigenous microbes in soil. The additive, 'Inipol EAP 22' stimulates the growth of specific flora, significantly accelerating the speed at which hydrocarbons are biodegraded. And it hans been tested in accordance with protocol approved by the USEPA and is registered on the National Contingency Plan Product Schedule List. In the experiment, three soil samples contaminated with fuel oil were prepared in the same concentration. Inipol EAP 22 was not added to one sample and was added to the other two samples with 5% and 10% of hydrocarbon by weight respectively. And $CO_2$gas derived from bacterial respiration was analyzed in each samples for 15 days. As a result, 145% and 153% of $CO_2$ evolution (microbial respiration) against the sample without 'Inipol EAP 22' occurred in samples with 'Inipol EAP 22' addition of 5% and 10%, respectively

• 농촌계획
• /
• 제20권1호
• /
• pp.127-134
• /
• 2014

This study, in order to complement instability of analysis result stemming from the choice between reference point and comparison point which is pointed out as the defect of shift-share analysis, conducted shift-share analysis using Gross Regional Domestic Product (GRDP) trend of Geumgang area, Chungcheongnam-do for the period from 2000 to 2011. As a result of the analysis, (1) industries that had both the positive Regional Share Effect (RSE) and Industrial Mixed Effect (IME) were service industries such as manufacturing industry, electricity gas, transportation industry, art, etc., which are positively influencing the regional industry. (2) industries that had both the negative RSE and IME were other service industries such as wholesale and retail businesses, lodging industry, food industry, real estate business and leasing service, business service industry, public administration, etc., which provide basic livelihood services for the residents. (3) industries that had the positive RSE and negative IME were agriculture, forestry and fishery industry, mining industry, construction industry, and educational service industry. (4) industries that had the negative RSE and positive IME were info-communications industry, financial and insurance businesses, health industry, etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.322-325
• /
• 2003

BST thin films were etched with inductively coupled plasmas. A chemically assisted physical etch of BST was experimentally confirmed by ICP under various gas mixtures. After a 20 % addition of $BCl_3$ to the $Cl_2/Ar$ mixture, resulting in an increased the chemical effect. As a increases of RF power, substrate power, and substrate temperature, and decrease of working pressure, the ion energy flux and chlorine atoms density increased. The maximum etch rate of the BST thin films was 90.1 nm/min at the RF power, substrate power, working pressure, and substrate temperature were 700 W, 300 W, 1.6 Pa, and 20 $^{\circ}C$, respectively. It was proposed that sputter etching is dominant etching mechanism while the contribution of chemical reaction is relatively low due to low volatility of etching product.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.761-764
• /
• 2009

The thermocatalytic decomposition of methane is an environmentally attractive approach to $CO_2$-free production of hydrogen. The fluidized bed was proposed for the continuous withdraw of product carbon from the reactor. The usage of carbon black was reported as stable catalyst for decomposition of methane. Therfore, carbon black (DCC-N330) is used as catalyst. A fluidized bed reactor made of quartz with 0.055 m I.D. and 1.0 m in height was selected for the thermo-catalytic decomposition. The porpane-containg methnae decomposition reaction was operated at the temperature range of 850-900 $^{\circ}C$ methane gas velocity of 1.0 $U_{mf}$ and the operating pressure of 1.0 atm. In this work, propane was added as reactant to make methane conversion higher. Therefore we compared with methane conversion and pre-experiment methane conversion that using only methane as reactant. The carbon black, after experiment, was measured in particle size and surface area and analyzed surface of the carbon black by TEM.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.791-793
• /
• 2009

Hydrogen has been recognized of the energy source for the future, in terms of the most environmentally acceptable energy source. A pressurized fluidized bed reactor made of carbon steel with 0.076 m I.D. and 1.0 m in height was employed for the thermocatalytic decomposition of methane to produce amount of $CO_2$ - free hydrogen with validity from a commercial point of view. The fluidized bed was proposed for withdrawing of product carbons from the reactor continuously. The methane decomposition rate with the carbon black N330 catalyst was rapidly reached a quasi-steady state and remained for several hour. The methane thermocatalytic decomposition reaction was carried out at the temperature range of 850 - 950 $^{\circ}C$, methane gas velocity of 2.0 $U_{mf}$ and the operating pressure of 1.0 -3.0 bar. Effect of operating parameters such as reaction temperature, pressure on the reaction rates was investigated and predicted the effect of a change in conditions on a chemical equilibrium thermodynamically, according to Le Chatelier's principle.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.388-391
• /
• 2006

A fluidized bed reactor made of quartz with 0.055m I.D. and 1.0m in height was employed for the thermocatalytic decomposition of propane to produce $CO_2-free$ hydrogen. The fluidized bed was proposed for the continuous withdraw of product carbons from the reactor The propane decomposition rate used carbon black DCC-N330, Hi-900L as a catalyst. The propane decomposition reaction was carried out at the temperature range of $600-800^{\circ}C$, propane gas velocity of $1.0U_{mf}$ and the operating pressure of 1.0 atm. Effect of operating parameters such as reaction temperature on the reaction rates was investigated. Resulting production in our experiment were not only hydrogen but also several by products such as methane, ethylene, ethane, and propylene.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.696-696
• /
• 2013

Solid Oxide Fuel Cells (SOFCs) have been gaining academic/industrial attention due to the unique high efficiency and minimized pollution emission. SOFCs are an electrochemical system composed of dissimilar materials which operates at relatively high temperatures ranging from 800 to 1000oC. The cell performance is critically dependent on the inherent properties and integration processing of the constituents, a cathode, an electrolyte, an anode, and an interconnect in addition to the sealing materials. In particular, the gas transport, ion transport, and by-product removal also affect the cell performance, in terms of open cell voltages, and cell powers. In particular, the polarization of cathode materials is one of the main sources which affects the overall function in SOFCs. Up to now, there have been studies on the materials design and microstructure design of the component materials. The current work reports the effect of thin film processing on cathode polarization in solid oxide fuel cells. The polarization issues are discussed in terms of dc- and ac-based electrical characterizations. The potential of thin film processing to the applicability to SOFCs is discussed.