• Neonatal Medicine
• /
• v.15 no.1
• /
• pp.44-53
• /
• 2008

Purpose : Epidemic keratoconjunctivitis (EKC) caused by adenovirus is a highly contagious disease, which has been reported as outbreaks involving adults in the community. However, there has been no report on EKC outbreak by adenovirus in a neonatal intensive care unit (NICU) in Korea. Aims of this study were to investigate the EKC outbreak by adenovirus type 8 in NICU and to confirm an effectiveness of polymerase chain reaction (PCR) for diagnosis. Methods : Conjunctival swab or nasopharyngeal aspirate specimens were taken from all patients and tested by viral culture and PCR. Adenovirus serotype was determined by sequencing of PCR product of selected region of hexon gene using the virus isolates or specimens. Results : An outbreak of EKC occurred which was involving 12 preterm infants in the NICU of the Seoul National University Children's Hospital between July 12th and August 1st, 2005. Three hospital staffs and one family member of the neonate were also affected. Adenovirus was detected in 12/12 (100%), 6/11 (54.5%) by PCR and virus culture, respectively. Eleven PCR-positive neonates were identified as serotype 8 by sequencing. The first affected 4 babies have had routine ROP (retinopathy of prematurity) examinations one week ago. While previous outbreaks were sustained for a few months, the event in our unit was controlled without complications in 3 weeks. Conclusion : We analyzed the EKC outbreak by adenovirus type 8 in NICU. Adenovirus serotype was identified by PCR and sequencing with high sensitivity for the first time in Korea, so we suggest this method can be very useful for rapid diagnosis and infection control.

• Journal of Legislation Research
• /
• no.53
• /
• pp.593-631
• /
• 2017

Like the technological competition of each country around commercialization of Autonomous Vehicles(the rest is 'AV'), legalizations are also in a competition. However, in the midst of this competition, the Ethik-Kommission Automatisiertes und vernetztes Fahren of Germany has recently introduced 20 guidelines. This guideline is expected to serve as a milestone for future AV legislations. In this paper, I have formulated a new legislative proposal that will incorporate the main content presented by the Ethik-Kommission. The structure is largely divided into general rules of purpose and definition, chapter on types of AV and safety standards, registration and inspection, maintenance, licenses for AV, driver's obligations, insurance and accident responsibilities, roads and facilities, traffic system, and chapter on penalties. The commercialization of AV in Korea seems to be in a distant future, and it is possible to pretend that it is not necessary to prepare legal systems. But considering our reality, leading legislation may be necessary. In this paper, I have prepared individual legislative proposals based on the essential matters based on the criminal responsibility in case of AV car accidents. To assure the safety of AV, AV and mode of operation were defined for more clear interpretation and application of law, and basic safety standards for AV were presented. In addition, the obligation of insurance and the liability for damages were defined, and the possibility of immunity from the criminal responsibility was examined. Furthermore, I have examined the penalties for penalties such as hacking in order to secure the effectiveness of the Act. Based on these discussions, I have attempted the 'Autonomous Vehicles Act', which aims to provide a basis for new discussions to be held on the basis of various academic fields related to the operation of AV and related industries in the future. Although there may be a sense of unurgency in time, the automobile industry needs time to prepare for the regulation of the AV ahead of time. And a process of public debate is also needed for the ecosystem of healthy AV industry.

• Journal of Intelligence and Information Systems
• /
• v.25 no.3
• /
• pp.221-238
• /
• 2019

Recently, companies and public institutions have been actively introducing chatbot services in the field of customer counseling and response. The introduction of the chatbot service not only brings labor cost savings to companies and organizations, but also enables rapid communication with customers. Advances in data analytics and artificial intelligence are driving the growth of these chatbot services. The current chatbot can understand users' questions and offer the most appropriate answers to questions through machine learning and deep learning. The advancement of chatbot core technologies such as NLP, NLU, and NLG has made it possible to understand words, understand paragraphs, understand meanings, and understand emotions. For this reason, the value of chatbots continues to rise. However, technology-oriented chatbots can be inconsistent with what users want inherently, so chatbots need to be addressed in the area of the user experience, not just in the area of technology. The Fourth Industrial Revolution represents the importance of the User Experience as well as the advancement of artificial intelligence, big data, cloud, and IoT technologies. The development of IT technology and the importance of user experience have provided people with a variety of environments and changed lifestyles. This means that experiences in interactions with people, services(products) and the environment become very important. Therefore, it is time to develop a user needs-based services(products) that can provide new experiences and values to people. This study proposes a chatbot development process based on user needs by applying the design thinking approach, a representative methodology in the field of user experience, to chatbot development. The process proposed in this study consists of four steps. The first step is 'setting up knowledge domain' to set up the chatbot's expertise. Accumulating the information corresponding to the configured domain and deriving the insight is the second step, 'Knowledge accumulation and Insight identification'. The third step is 'Opportunity Development and Prototyping'. It is going to start full-scale development at this stage. Finally, the 'User Feedback' step is to receive feedback from users on the developed prototype. This creates a "user needs-based service (product)" that meets the process's objectives. Beginning with the fact gathering through user observation, Perform the process of abstraction to derive insights and explore opportunities. Next, it is expected to develop a chatbot that meets the user's needs through the process of materializing to structure the desired information and providing the function that fits the user's mental model. In this study, we present the actual construction examples for the domestic cosmetics market to confirm the effectiveness of the proposed process. The reason why it chose the domestic cosmetics market as its case is because it shows strong characteristics of users' experiences, so it can quickly understand responses from users. This study has a theoretical implication in that it proposed a new chatbot development process by incorporating the design thinking methodology into the chatbot development process. This research is different from the existing chatbot development research in that it focuses on user experience, not technology. It also has practical implications in that companies or institutions propose realistic methods that can be applied immediately. In particular, the process proposed in this study can be accessed and utilized by anyone, since 'user needs-based chatbots' can be developed even if they are not experts. This study suggests that further studies are needed because only one field of study was conducted. In addition to the cosmetics market, additional research should be conducted in various fields in which the user experience appears, such as the smart phone and the automotive market. Through this, it will be able to be reborn as a general process necessary for 'development of chatbots centered on user experience, not technology centered'.

• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.296-302
• /
• 2019

Ganjang-gejang (soy sauce-marinated crab) is a ready-to-eat (RTE) seafood and is also one of the most popular traditional dishes in Korea. It is generally prepared by washing raw blue crabs and then preserving them in soy sauce. Since this process does not involve cooking or any treatment with heat, it is difficult to control the microbiological quality of the final product. Thus, the objectives of this study were to compare the efficacies of various sanitizers in eliminating microorganisms on raw blue crab during the washing step and to evaluate the effectiveness of chitosan on the inhibition of microbial growth in the ganjang-gejang during storage. The raw blue crabs were submerged in chlorinated water (50 mg/L), peracetic acid (40 mg/L), acetic acid (5%) and lactic acid (5%) for 10 min at $25^{\circ}C$, respectively. The blue crabs treated with 5% acetic acid were marinated with soy sauce containing 0.5 and 1% of soluble chitosan, followed by storing them at 4 and $12^{\circ}C$ for up to 30 days. Results show that 5% acetic acid reduced the microbial populations on the blue crabs by 1.5 log CFU/g, which was significantly higher than those of other treatments. Based on these results, 5% acetic acid was selected for the washing step. The microbial populations of all ganjang-gejang samples significantly increased to about 8.0 CFU/g at $12^{\circ}C$ for 7 days. At $4^{\circ}C$, the microbial populations of the products containing 1% chitosan increased by about 2.9 CFU/g for 20 days, which were significantly lower than those (4.2-4.5 log CFU/g) of the products without and with 0.5% chitosan. Thus, these results suggest that 5% acetic acid washing of raw blue crabs and the addition of 1% chitosan in ganjang-gejang could improve the microbiological quality of the final products under refrigerated condition.

• Korean Journal of Microbiology
• /
• v.54 no.4
• /
• pp.369-378
• /
• 2018

This study was conducted to evaluate effects of dietary microbial probiotics on the growth and disease resistance of olive flounder (Paralichthys olivaceus) in a recirculating aquaculture system (RAS), and the effects of the probiotic bioaugmentation on the microbial community structure and water quality. For the analysis, 80 juvenile fish (average weight, $25.7{\pm}7.6g$; average length, $15.2{\pm}1.7cm$) were fed a basal diet containing a commercial microbial product CES-AQ1 (CES; $1{\times}10^9\;CFU/kg$ diet) in an RAS for 8 weeks. Weight gain, the specific growth rate, feed efficiency, and protein efficiency ratio of the fish fed the CES diet in the RAS were 1.5~2.5 times higher than those of fish fed the basal diet alone, or the basal diet containing oxytetracycline (OTC), yeast plus bacterium, or Bacillus subtilis in a still water system. There was no significant difference in the pathogen challenge test between fish fed the OTC diet and fish fed the CES diet in the RAS, suggesting the CES-AQ1 probiotic used in the RAS as a potential replacement for antibiotics. The RAS biofilter maintained the highest microbial diversity and appeared to harbor microbial communities with ammonium oxidation, denitrification, and fish pathogen suppression functions. Ammonia, which is hazardous to fish, was significantly decreased to < 0.5 mg/L in 19 days, indicating the effectiveness of probiotic supplementation to maintain good water quality in RAS. These results suggest that the intestinal microbial communities of fish are stabilized by a probiotic-containing diet (CES) and that bioaugmentation with probiotics may be an eco-friendly and economical supplement for aquaculture of olive flounder, promoting both good water quality and fish health in an RAS.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.487-499
• /
• 2021

Purpose:The purpose of the paper is to review the problems of performance enhancement of safety certification standards and to suggest directions for improvement in order to rationalize safety certification standards for future industrial development and environmental changes. Method: The problems and limitations of the safety certification system are summarized through literature review and interview with manager, and the status of safety certification standards is classified into design standards, performance standards, and detailed standards, and the status analysis is performed. In addition, by synthesizing the results of the investigation and analysis, improvements are suggested to improve the performance of the safety certification standards. Result: Through the survey, the problems and limitations of safety certification could be grouped into six categories: government-led certification system operation, standardized certification standards, long time required to improve certification, poor certification standards preparation system, and lack of reflection of industry opinions. And, as a result of analyzing the certification standards by dividing them into performance and design standards, in the case of machinery, equipment, and protection devices, the design standards were high at 69.7% and 64.9%, whereas in the case of protective equipment, the performance standards were high at 61.1%. In order to improve the performance of safety certification standards centered on design standards, it is necessary to determine the possibility of performance enhancement of the certification standards and determine the feasibility of the inspection test method. In order to improve performance, it was reviewed that it was necessary to establish a systemic foundation and infrastructure, such as strengthening the Product Liability Act, systematizing market monitoring, etc., distributing certification test tasks, and participating in the preparation of certification standards by the private sector. Conclusion: Through this study, the problems and limitations of Korea's safety certification system were summarized and the necessity for performance improvement was reviewed. Performance improvement of safety certification standards is a matter that requires preparatory work, such as legislative revision and infrastructure construction, and requires mid-to-long-term promotion. In addition, rather than improving the overall safety certification standards, the performance requirements for each item subject to certification should be reviewed and promoted, and details should be specified through additional research.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.202-217
• /
• 2022

Purpose: The recent increased use of Personal Mobility (PM) has been accompanied by a rise in the annual number of accidents. Accordingly, the safety requirements for PM use are being strengthened, but the laws/systems, infrastructure, and management systems remain insufficient for fostering a safe environment. Therefore, this study comprehensively searches the main problems and improvement methods through a review of previous studies that are related to PM. Then the priorities according to the importance of the improvement methods are presented through the Delphi survey. Method: The research method is mainly composed of a literature study and an expert survey (Delphi survey). Prior research and improvement cases (local governments, government departments, companies, etc.) are reviewed to derive problems and improvements, and a problem/improvement classification table is created based on keywords. Based on the classification contents, an expert survey is conducted to derive a priority improvement plan. Result: The PM-related problems were in 'non-compliance with traffic laws, lack of knowledge, inexperienced operation, and lack of safety awareness' in relation to human factors, and 'device characteristics, road-drivable space, road facilities, parking facilities' in relation to physical factors. 'Management/supervision, product management, user management, education/training' as administrative factors and legal factors are divided into 'absence/sufficiency of law, confusion/duplication, reduced effectiveness'. Improvement tasks related to this include 'PM education/public relations, parking/return, road improvement, PM registration/management, insurance, safety standards, traffic standards, PM device safety, PM supplementary facilities, enforcement/management, dedicated organization, service providers, management system, and related laws/institutional improvement', and 42 detailed tasks are derived for these 14 core tasks. The results for the importance evaluation of detailed tasks show that the tasks with a high overall average for the evaluation items of cost, time, effect, urgency, and feasibility were 'strengthening crackdown/instruction activities, education publicity/campaign, truancy PM management, and clarification of traffic rules'. Conclusion: The PM market is experiencing gradual growth based on shared services and a safe environment for PM use must be ensured along with industrial revitalization. In this respect, this study seeks out the major problems and improvement plans related to PM from a comprehensive point of view and prioritizes the necessary improvement measures. Therefore, it can serve as a basis of data for future policy establishment. In the future, in-depth data supplementation will be required for each key improvement area for practical policy application.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.122-126
• /
• 2023

In this paper, a control system for a complex microbial incubator was proposed. The proposed control system consists of a control unit, a communication unit, a power supply unit, and a control system of the complex microbial incubator. The controller of the complex microbial incubator is designed and manufactured to convert analog signals and digital signals, and control signals of sensors such as displays using LCD panels, water level sensors, temperature sensors, and pH concentration sensors. The water level sensor used is designed and manufactured to enable accurate water level measurement by using the IR laser method with excellent linearity in order to solve the problem that existing water level sensors are difficult to measure due to foreign substances such as bubbles. The temperature sensor is designed and used so that it has high accuracy and no cumulative resistance error by measuring using the thermal resistance principle. The communication unit consists of two LAN ports and one RS-232 port, and is designed and manufactured to transmit signals such as LCD panel, PCT panel, and load cell controller used in the complex microbial incubator to the control unit. The power supply unit is designed and manufactured to supply power by configuring it with three voltage supply terminals such as 24V, 12V and 5V so that the control unit and communication unit can operate smoothly. The control system of the complex microbial incubator uses PLC to control sensor values such as pH concentration sensor, temperature sensor, and water level sensor, and the operation of circulation pump, circulation valve, rotary pump, and inverter load cell used for cultivation. In order to evaluate the performance of the control system of the proposed complex microbial incubator, the result of the experiment conducted by the accredited certification body showed that the range of water level measurement sensitivity was -0.41mm~1.59mm, and the range of change in water temperature was ±0.41℃, which is currently commercially available. It was confirmed that the product operates with better performance than the performance of the products. Therefore, the effectiveness of the control system of the complex microbial incubator proposed in this paper was demonstrated.

• Korea Science and Art Forum
• /
• v.20
• /
• pp.147-158
• /
• 2015

This study made an approach to the industrial exhibition space, which is a medium of marketing communication, from the position of an enterprise and consumers through the output of Space Design, and conducted it with focus on B2B transactions among specialized exhibitions. In addition, this study inquired into what factors should be considered along with space design by interpreting the purpose of participating in the exhibition and space design of the enterprise which supply capital goods, elements, related technologies and materials, etc. This study aimed at drawing the direct/indirect effect, produced by space design, on the marketing by analyzing correlation between space design and participating enterprises' marketing. Despite the marketing effect of the exhibition, which was proved by preceding research results, the reality is that exhibition-participating expenses work as considerable burden on enterprises. Particularly, booth design, which is forming the most proportion among the participating expenses, was found to have insufficient influence on visitors due to the decline in its importance among diverse factors influencing visitor's decision to visit a booth. Regardless of the business category of participating enterprises in the exhibition, the standard of exhibits was ranked as the most important consideration factor in visiting a booth. Even by business category, the standard of booth design rarely had an influence on booth visit. Booth design had an affirmative influence on participating enterprise's preference, but its influence on product purchase or business talk & contact with a participating enterprise or price was found to be extremely low. It's difficult to judge marketing success or failure of an exhibition by the form and standard of booth design. Preferably, this study infers that it's necessary to put much weight on qualitative excellence of an exhibition, which consists of participation of an enterprise in possession of excellent technologies, exhibits with higher standards and high-quality visitors with purchasing power. This study suggests that it's more effective to set up the plan for expansion of participation in exhibition by optimally regulating the proportion of space design in participating expense to increase marketing effectiveness of an exhibition. The limitations of this study, analysis of which based on the visitors to an exhibition only, requires supplementation through the follow-up research work on participating enterprises in the exhibition.

• Korean Journal of Remote Sensing
• /
• v.40 no.2
• /
• pp.229-241
• /
• 2024

With the advancement of big data processing technology using cloud platforms, access, processing, and analysis of large-volume data such as satellite imagery have recently been significantly improved. In this study, the Change Detection Method, a relatively simple technique for retrieving soil moisture, was applied to the backscattering coefficient values of pre-processed Sentinel-1 synthetic aperture radar (SAR) satellite imagery product based on Google Earth Engine (GEE), one of those platforms, to estimate the surface soil moisture for six observatories within the Yongdam Dam watershed in South Korea for the period of 2015 to 2023, as well as the watershed average. Subsequently, a correlation analysis was conducted between the estimated values and actual measurements, along with an examination of the applicability of GEE. The results revealed that the surface soil moisture estimated for small areas within the soil moisture observatories of the watershed exhibited low correlations ranging from 0.1 to 0.3 for both VH and VV polarizations, likely due to the inherent measurement accuracy of the SAR satellite imagery and variations in data characteristics. However, the surface soil moisture average, which was derived by extracting the average SAR backscattering coefficient values for the entire watershed area and applying moving averages to mitigate data uncertainties and variability, exhibited significantly improved results at the level of 0.5. The results obtained from estimating soil moisture using GEE demonstrate its utility despite limitations in directly conducting desired analyses due to preprocessed SAR data. However, the efficient processing of extensive satellite imagery data allows for the estimation and evaluation of soil moisture over broad ranges, such as long-term watershed averages. This highlights the effectiveness of GEE in handling vast satellite imagery datasets to assess soil moisture. Based on this, it is anticipated that GEE can be effectively utilized to assess long-term variations of soil moisture average in major dam watersheds, in conjunction with soil moisture observation data from various locations across the country in the future.