• 풍력에너지저널
• /
• 제4권1호
• /
• pp.20-29
• /
• 2013

Load measurement, which is performed based on IEC 61400-13, consists of three stages: the stage of collecting huge amounts of load measurement data through a measurement campaign lasting for several months; the stage of processing the measured data, including data validation and classification; and the stage of analyzing the processed data through time series analysis, load statistics analysis, frequency analysis, load spectrum analysis, and equivalent load analysis. In this research, we pursued the development of an analysis software in MATLAB to save labor and to secure exact and consistent performance evaluation data in processing and analyzing load measurement data. The completed analysis software also includes the functions of processing and analyzing power performance measurement data in accordance with IEC 61400-12. The analysis software was effectively applied to process and analyse the load measurement data from a demonstration research for a 750 kW direct-drive wind turbine generator system (KBP-750D), performed at the Daegwanryeong Wind Turbine Demonstration Complex. This paper describes the details of the analysis software and its processing and analysis stages for load measurement data and presents the analysis results.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.724-730
• /
• 2010

A load cell is a converter that generates voltage signals when a certain force is effected in a given direction. An essential measurement device for electronic scales that indicate weight by numbers. These load cells are being applied in various areas such as daily life, distribution, laboratory and industrial. Recently the study to manufacture load cells in a more simple method while increasing performance is being persisted. In this study based on the comparison of load cells manufactured through single surface processing using strain gauges. Those manufactured through dual surface processing using strain gauges. Ultimately persist a more simple method of load cell manufacturing while increasing its performance. The elements that were compared were linearity, hysteresis, creep and eccentricity which are short tenn performance factors. The conclusion was that single surface processing showed almost identical data as that of dual surface processing, and the load cell error rate(0.005%) also excess regulation. The manufacturing time was shortened while mass-production was possible. Which indicates a development in the weighing industry.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.269-272
• /
• 2006

Load analysis software enables to design wind turbines effectively and exactly. In this paper, Bladed software developed by Garrad Hassan and Partners is used for load analysis. When using Bladed software, many time is requested to input data which is called by pre-processing. So in this paper, pre-processing Is automated by in-house software(BX) With this BX software, we can reduce the total time for pre-processing about 90%.

• 한국산학기술학회논문지
• /
• 제19권8호
• /
• pp.535-544
• /
• 2018

다양한 센서를 내장하고 고품질의 무선 네트워크 통신 기능을 탑재한 이동 장치의 보급이 확대됨에 따라 다양한 서비스 환경에서 이동 장치로부터 생성되는 시공간 데이터 량도 빠르게 증가하고 있다. 이와 같이 실시간 특성을 갖는 대량의 공간 데이터 스트림을 처리하기 위한 기존의 연구에서 하둡 기반의 공간 빅 데이터 시스템은 일괄 처리 방식의 플랫폼으로 공간 데이터 스트림에 대한 실시간 서비스에 적용하기에는 매우 어렵다. 이에 본 논문에서는 맵리듀스 온라인 프레임워크를 확장하여 연속적으로 입력되는 공간 데이터 스트림에 대한 실시간 질의 처리를 지원하고, 질의 처리 과정에서 야기될 수 있는 부하 문제를 효과적으로 분산하는 부하 관리 기법을 제안한다. 제안 기법에서는 공간 분할 영역을 기반으로 입력 데이터의 유입율과 부하율을 이용하여 노드들에 대해 동적으로 부하를 분산하는 기법을 제시하였다. 실험에서는 특정 공간 영역에서의 부하 관리가 요구될 때 해당 영역에서의 공간 데이터 스트림을 공유하는 자원들에게 분배함으로써 효과적인 질의 처리를 지원할 수 있음을 보인다.

• 농업과학연구
• /
• 제42권1호
• /
• pp.53-61
• /
• 2015

Development of highly efficient and energy-saving tractors has been one of the issues in agricultural machinery. For design of such tractors, measurement and analysis of load on major power transmission parts of the tractors are the most important pre-requisite tasks. Objective of this study was to perform pre-processing procedures before effective analysis of load data of agricultural tractors (30, 75, and 82 kW) during major field operations such as plow tillage, rotary tillage, baling, bale wrapping, and to select the suitable pre-processing method for the analysis. A load measurement systems, equipped in the tractors, were consisted of strain-gauge, encoder, hydraulic pressure, and radar speed sensors to measure torque and rotational speed levels of transmission input shaft, PTO shaft, and driving axle shafts, pressure of the hydraulic inlet line, and travel speed, respectively. The entire sensor data were collected at a 200-Hz rate. Plow tillage, rotary tillage, baling, wrapping, and loader operations were selected as major field operations of agricultural tractors. Same or different farm works and driving levels were set differently for each of the load measuring experiment. Before load data analysis, pre-processing procedures such as outlier removal, low-pass filtering, and data division were performed. Data beyond the scope of the measuring range of the sensors and the operating range of the power transmission parts were removed. Considering engine and PTO rotational speeds, frequency components greater than 90, 60, and 60 Hz cut off frequencies were low-pass filtered for plow tillage, rotary tillage, and baler operations, respectively. Measured load data were divided into five parts: driving, working, implement up, implement down, and turning. Results of the study would provide useful information for load characteristics of tractors on major field operations.

• 인지과학
• /
• 제29권1호
• /
• pp.39-59
• /
• 2018

작업기억 부담이 부적 얼굴정서 처리에 미치는 영향을 밝히기 위해, N-back 과제 수행 도중 제시된 부적 얼굴표정에 의해 유발된 ERP성분들을 조사하였다. 한 개씩 순차적으로 제시되는 시각적 사물그림들에 대한 기억을 유지하고 갱신하도록 요구하면서(N-back 과제) 이 사물그림들이 제시되는 사이에 공포표정 또는 중립표정의 얼굴자극을 하나씩 제시하였는데, 작업기억 부담을 0-back 조건(저부담)과 2-back 조건(고부담)으로 조작하였다. N-back과제 수행반응을 분석한 결과, 고부담조건에 비해 저부담조건에서 더 빠르고 정확한 반응이 관찰되었다. 얼굴자극에 의해 유발된 ERP 평균진폭을 분석한 결과, 후두영역에서 측정한 P1 진폭에서는 정서가효과는 유의미하지 않았고 작업기억 부담효과만 유의미하였다(고부담 > 저부담). 후측 후두-측두 영역에서 측정한 N170 진폭에서 얼굴 정서가효과는 전반적으로는 유의미하였지만(부정 > 중립) 세부적으로는 작업기억부담과 반구에 따라 다르게 나타났는데, 정서가효과가 좌반구에서는 저부담조건의 경우에만, 우반구에서는 두 부담조건 모두에서 관찰되었다. 결국, 얼굴표정의 부적 정서가가 N170에 미치는 영향이 좌반구에서는 작업기억 부담에 의해 조절되었지만 우반구에서는 그렇지 않았다. 이러한 결과는, 부적 얼굴 표정의 초기 정서처리가 작업기억의 유지 및 조작 부담이 큰 경우 좌반구에서는 약화되거나 일어나지 않을 수 있는 반면, 우반구에서는 작업기억 부담의 크기에 관계없이 일어남을 보여주는 것으로써, 부적 얼굴정서 처리의 우반구 편재를 시사한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권12호
• /
• pp.5694-5711
• /
• 2017

The technology of cloud computing is growing very quickly, thus it is required to manage the process of resource allocation. In this paper, load balancing algorithm based on honey bee behavior (LBA_HB) is proposed. Its main goal is distribute workload of multiple network links in the way that avoid underutilization and over utilization of the resources. This can be achieved by allocating the incoming task to a virtual machine (VM) which meets two conditions; number of tasks currently processing by this VM is less than number of tasks currently processing by other VMs and the deviation of this VM processing time from average processing time of all VMs is less than a threshold value. The proposed algorithm is compared with different scheduling algorithms; honey bee, ant colony, modified throttled and round robin algorithms. The results of experiments show the efficiency of the proposed algorithm in terms of execution time, response time, makespan, standard deviation of load, and degree of imbalance.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 춘계학술발표대회
• /
• pp.908-910
• /
• 2013

Customers of different electricity consumer types have different daily load shapes in the manner of different characteristics. Therefore, maximally capture load shape variability are desirable in load flow analysis. And most of time, such load shape variability can be found in the particular subspace of load diagrams. Therefore, in this paper, we are using subspace projection method to capture the emerging subspaces of load diagrams which maximize the difference between particular load shapes in different group of customers. As the result, subspace projection method can be used in load profiling and the performance is good as traditional approaches.

• 한국콘텐츠학회논문지
• /
• 제16권7호
• /
• pp.667-680
• /
• 2016

하둡 맵리듀스와 같은 분산 컴퓨팅 플랫폼이 개발됨에 따라, 기존 단일 컴퓨터 상에서 수행되는 질의 처리 기법을 분산 컴퓨팅 환경에서 효율적으로 수행하는 것이 필요하다. 특히, 주어진 두 데이터 집합에서 유사도가 높은 모든 데이터 쌍을 탐색하는 유사 조인 질의를 분산 컴퓨팅 환경에서 수행하려는 연구가 있어 왔다. 그러나 분산 병렬 환경에서의 기존 유사 조인 질의처리 기법은 데이터 전송 비용만을 고려하기 때문에 클러스터 간에 비균등 연산 부하 분산의 문제점이 존재한다. 본 논문에서는 분산 컴퓨팅 환경에서 효율적인 유사 조인 처리를 위한 행렬 기반 부하 분산 알고리즘을 제안한다. 제안하는 알고리즘은 클러스터의 균등 부하 분산을 위해 행렬을 이용하여 예상되는 연산 부하를 측정하고 이에 따라 파티션을 생성한다. 아울러, 클러스터에서 질의 처리에 사용되지 않는 데이터를 필터링함으로서 연산 부하를 감소시킨다. 마지막으로 성능 평가를 통해 제안하는 알고리즘이 기존 기법에 비해 질의 처리 성능 측면에서 우수함을 보인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1216-1221
• /
• 2005

The GPS software receiver based on the SDR(Software Defined Radio) technology provides the ability to easily adopt other signal processing algorithms without changing or modifying the hardware of the GPS receiver. However, it is difficult to implement the GPS software receiver using a commercial processor because of heavy computation load for processing the GPS signals in real time. This paper proposes an efficient GPS signal processing scheme and correlator structure to reduce the computation load for processing the GPS signal in the GPS software receiver, which uses a patterned look-up table method to generate the correlation value between the GPS signals and the replica signals. In this paper, it is explained that the computation load of the proposed scheme is much smaller than that of the previous GPS signal processing scheme. Finally, the processing time of the proposed scheme is compared with that of the previous scheme, and the improvement is shown from the viewpoint of the computation load.