• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.4
• /
• pp.24-32
• /
• 2019

According to the Ministry of Land, Infrastructure, and Transport, the total area of unexecuted urban planning facilities in Korea is about $1,257km^2$, of which 47% is the unexecuted urban green space and forests. In the case of Seoul, the total area of unexecuted urban planning facilities is about $66km^2$, which is 5.24% of the total unexecuted area in the entire country. In Seoul, approximately 88% of the total unexecuted area is urban green space and forests, which is higher than the national rate. About 92% of the unexecuted urban planning facilities are long-term unexecuted urban planning facilities that are more than 10 years old. This study assessed the economic value of potential ecosystem services, focusing on the regulation service, supporting service, and cultural service, for urban green space and forests of unexecuted urban planning facilities in Seoul by using meta-regression analysis. As a result, the value of the regulation service provided by the urban green space and forests in Seoul was about 16.39 billion KRW, the value of the supporting service was about 5.8 billion KRW, and the cultural service value was about 7.78 billion KRW. The total value of ecosystem services is about 33.93 billion KRW. The values of regulation service and cultural service were the highest, and that was attributed to the characteristics of the downtown area. The significance of this study is to evaluate the value of ecosystem services for unexecuted urban planning facilities in Seoul. The results of this study can be used not only in the process of urban planning or policymaking but also land compensation methods applying the concept of an ecosystem service payment system.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.670-691
• /
• 2018

This study presents the research results of the BMT(Benchmark Model Test) simulations of the DECOVALEX-2019 project Task B. Task B named 'Fault slip modelling' is aiming at developing a numerical method to predict fault reactivation and the coupled hydro-mechanical behavior of fault. BMT scenario simulations of Task B were conducted to improve each numerical model of participating group by demonstrating the feasibility of reproducing the fault behavior induced by water injection. The BMT simulations consist of seven different conditions depending on injection pressure, fault properties and the hydro-mechanical coupling relations. TOUGH-FLAC simulator was used to reproduce the coupled hydro-mechanical process of fault slip. A coupling module to update the changes in hydrological properties and geometric features of the numerical mesh in the present study. We made modifications to the numerical model developed in Task B Step 1 to consider the changes in compressibility, Permeability and geometric features with hydraulic aperture of fault due to mechanical deformation. The effects of the storativity and transmissivity of the fault on the hydro-mechanical behavior such as the pressure distribution, injection rate, displacement and stress of the fault were examined, and the results of the previous step 1 simulation were updated using the modified numerical model. The simulation results indicate that the developed model can provide a reasonable prediction of the hydro-mechanical behavior related to fault reactivation. The numerical model will be enhanced by continuing interaction and collaboration with other research teams of DECOVALEX-2019 Task B and validated using the field experiment data in a further study.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.1
• /
• pp.36-42
• /
• 2019

A macroporous Sn thick film as a high capacity negative electrode for a lithium ion secondary battery was prepared by using a chemical etching method using nitric acid for a Sn film having a thickness of $52{\mu}m$. The porous Sn thick film greatly reduced the over-voltage for the alloying reaction with lithium by the increased reaction area. At the same time. The porous structure of active Sn film plays a part in the buffer and reduces the damage by the volume change during cycles. Since the porous Sn thick film electrode does not require the use of the binder and the conductive carbon black, it has substantially larger energy density. As the concentration of nitric acid in etching solution increased, the degree of the etching increased. The etching of the Sn film effectively proceeded with nitric acid of 3 M concentration or more. The porous Sn film could not be recovered because the most of Sn was eluted within 60 seconds by the rapid etching rate in the 5 M nitric acid. In the case of etching with 4 M nitric acid for 60 seconds, the appropriate porous Sn film was formed with 48.9% of weight loss and 40.3% of thickness change during chemical acid etching process. As the degree of etching of Sn film increased, the electrochemical activity and the reversible capacity for the lithium storage of the Sn film electrode were increased. The highest reversible specific capacity of 650 mAh/g was achieved at the etching condition with 4 M nitric acid. The porous Sn film electrode showed better cycle performance than the conventional electrode using a Sn powder.

• Journal of the Korean earth science society
• /
• v.40 no.3
• /
• pp.227-239
• /
• 2019

Heavy snowfall events frequently occur in the Gangwon province, and the snowfall amount significantly varies in space due to the complex terrain and topographical modulation of precipitation. Understanding the spatial characteristics of heavy snowfall and its prediction is particularly challenging during snowfall events in the easterly winds. The easterly wind produces a significantly different atmospheric condition. Hence, it brings different precipitation characteristics. In this study, we have investigated the microphysical characteristics of snowfall in the windward and leeward sides of the Taebaek mountain range in the easterly condition. The two snowfall events are selected in the easterly, and the snow particles size distributions (SSD) are observed in the four sites (two windward and two leeward sites) by the PARSIVEL distrometers. We compared the characteristic parameters of SSDs that come from leeward sites to that of windward sites. The results show that SSDs of windward sites have a relatively wide distribution with many small snow particles compared to those of leeward sites. This characteristic is clearly shown by the larger characteristic number concentration and characteristic diameter in the windward sites. Snowfall rate and ice water content of windward also are larger than those of leeward sites. The results indicate that a new generation of snowfall particles is dominant in the windward sites which is likely due to the orographic lifting. In addition, the windward sites show heavy aggregation particles by nearby zero ground temperature that is likely driven by the wet and warm condition near the ocean.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.3
• /
• pp.766-778
• /
• 2019

In this study, Poria cocos bark were extracted by supercritical process, and anti-inflammatory, whitening, and antioxidant effects were measured in comparison with ethanol extract. Also, An effective percutaneous permeation method using a selected formulation of the extract and a drug delivery peptide was proposed. Pachymic acid, known as the anti-cancer and anti-inflammatory compound of the ventricle, is an indicator component and the HPLC analysis shows that the supercritical extract of the pericardium is more than twice that of the Poria cocos bark extract. In order to confirm antioxidative effect of Bombyx mori, DPPH scavenging ability and ABTS scavenging ability test showed that the ethanol extract of Poria cocos Back had lower concentration than the supercritical extract of Poria cocos back. However, RAW 264.7 Measurements of Nitric oxide (NO) production in cells showed lower NO production at the same concentration than the Poria cocos back ethanol extract. In addition, after 72 hours of processing of $20{\mu}g/mL$ of the Poria cocos back extract in B16 melanoma cells, both the intracellular and extracellular melanin extract were effective and the supercritical extract was lower melanin content. No toxicity was observed at the concentration of $800{\mu}g/mL$ in RAW 264.7 cells used in NO production experiments. However, in B16 melanoma cells, even at $50{\mu}g/mL$, both Poria cocos back ethanol extract and supercritical extract showed a survival rate of less than 60%. The liposome formulation and drug delivery peptides were shown to be useful for percutaneous permeation of Supercritical Extract of Poria cocos back using a liposome formulation and a drug delivery peptide. it is expected that there will be great potential for development as a variety of cosmetic materials for Poria cocos back.

• Korean Journal of Environment and Ecology
• /
• v.33 no.4
• /
• pp.422-439
• /
• 2019

The rear edge population is considered to have low genetic diversity and high risk of extinction according to a highly isolated distribution. However, the rear edge population is observed to have persisted for an extended period despite the low genetic diversity. As such, it is necessary to understand the ecological process involved in the persistence of the population. Viola mirabilis L. in Korea is considered the rear edge population from the perspective of the worldwide distribution. We surveyed the distribution range of V. mirabilis, which shows the isolated distribution in the central area of Korea, to find out the factors of its persistence. Next, we investigated and accessed the vegetational pattern of habitats, soil environment, phenology, self-compatibility, population structure, and extinction risk factors observed in the distribution area. V. mirabilis was distributed in the understory of the deciduous forest, planted forest of the deciduous conifer and deciduous broad-leaved trees, shrubland, and grassland in the limestone area. We also observed the re-establishment of seedlings in the population, and most of them showed a stable population structure. For chasmogamous flowers, the visit by pollinators has a significantly positive relationship with the production of fruits. However, we found that the production of the cleistogamous flowers was more numerous in all studied populations and that only the cleistogamous flowers were produced despite a more substantial plant size in some populations. The plant size was more related to the production of the cleistogamous flowers than that of the chasmogamous flowers. Accordingly, the cleistogamous flowers significantly contributed to seedling recruitment in the population. We found that the production of the chasmogamous flowers and the cleistogamous flowers did not have a correlation with the factors of the soil analysis except for phosphoric acid. V. mirabilis showed the self-incompatibility characteristics most likely due to the production capability of the cleistogamous flowers. Potential extinction risk factors observed in the distribution area was included the development of limestone mine, the expansion of agricultural fields, and the construction of houses. Although V. mirabilis showed an isolated distribution in the limestone area in the Korean peninsula, it showed a diverse distribution in a wide habitat environment ranging from the grassland to the understory of the trees with relatively low canopy closure rate. Moreover, we concluded that the persistence of the population was possible if we can maintain the current state of multiple populations and stable population structure.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.31-48
• /
• 2019

The artificial ground freezing (AGF) method is a groundwater cutoff and/or ground reinforcement method suitable for constructing underground structures in soft ground and urban areas. The AGF method conducts a freezing process by employing a refrigerant circulating through a set of embedded freezing pipes to form frozen walls serving as excavation supports and/or cutoff walls. However, thermal expansion of the pore water during freezing may cause excessive deformation of the ground. On the other hand, as the frozen soil is thawed after completion of the construction, mechanical characteristics of the thawed soil are changed due to the plastic deformation of the ground and the rearrangement of soil fabric. This paper performed a field experiment to evaluate the freezing rate of marine clay in the application of the AGF method. The field experiment was carried out by circulating liquid nitrogen, which is a cryogenic refrigerant, through one freezing pipe installed at a depth of 3.2 m in the ground. Also, a piezo-cone penetration test (CPTu) and a lateral load test (LLT) were performed on the marine clay before and after application of the AGF method to evaluate a change in strength and stiffness of it, which was induced by freezing-thawing. The experimental results indicate that about 11.9 tons of liquid nitrogen were consumed for 3.5 days to form a cylindrical frozen body with a volume of about $2.12m^3$. In addition, the strength and stiffness of the ground were reduced by 48.5% and 22.7%, respectively, after a freezing-thawing cycle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.16-19
• /
• 2019

A thinner film has superior electrical properties and a better amorphous structure. Amorphous structures can be effective in improving conductivity through a depletion effect. Research is needed on the Schottky contact, where potential barriers are formed, as a way to identify these characteristics. $SiO_2/SnO_2$ thin films were prepared to examine the amorphous structure and Schottky contact, $SiO_2$ thin films were prepared using Ar = 20 sccm. $SnO_2$ thin films were deposited using mixed gas with a flow rate of argon and oxygen at 20 sccm, and $SnO_2$ thin films were added by magnetron sputtering and treated at $100^{\circ}C$ and $150^{\circ}C$. To identify the conditions under which the amorphous structure was constructed, the XRD patterns were investigated and C-V and I-V measurements were taken to make Al electrodes and perform electrical analysis. The depletion layer was formed by the recombination of electrons and holes through the heat treatment process. $SiO_2/SnO_2$ thin films confirmed that the pores were well formed when heat treated at $100^{\circ}C$ and an electric current was applied over the micro area. An amorphous $SiO_2/SnO_2$ thin film with heat treatment at $100^{\circ}C$ showed no reflection at $33^{\circ}\;2{\theta}$ in the XRD pattern, and a reflection at $44^{\circ}2\;{\theta}$. The macroscopic view (-30 V

• Resources Recycling
• /
• v.30 no.3
• /
• pp.47-54
• /
• 2021

Palladium present in colloidal-type plated spent catalyst solution that is used in electroless plating process has not been recovered but discharged as wastewater so far. Recyclig of paladium in colloidal-type plated spent catalyst solution is achieved with this study. This study presents the estimation of resource consumption and GHG emissions during the recycling and disposal of palladium in the plated spent catalyst solution using life cycle assessment. The reduction of resources and GHG are also estimated. Based on the palladium amount of 1 kg during disposal, the GHG emission amount was estimated to be 9.67E+03 kgCO₂eq., and the amount of resource consumption was 3.94E+01 kgSb-eq. However, GHG emission was 1.96E+03 kgCO₂eq., and the amount of resource consumption was 1.54E+01 kgSb-eq. during recycling. Considering the major substances affecting GHG emissions and amount of resource consumption, CO₂ was found to significantly affect GHG emissions, accounting for 91.42% in disposal and 98.37% in recycling. The major substance affecting the amount of resource consumption was hard coal, which accounted for 40.63% in disposal and 60.73% in recycling. Upon recycling 1 kg palladium, 8,967.17 kgCO₂eq. of greenhouse gas emission was reduced, while the resource consumption was reduced to 10.10 kg Sb-eq. In addition, the direct palladium resource reduction rate due to palladium recycling was 50%.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.1
• /
• pp.1-19
• /
• 2021

The purpose of this research is to improve the investment success rate for startups in the water industry for the development of the entrepreneurial environment of the Korean water industry. In this research, we identified investment determinants through prior research and stratified them, and then surveyed the investor group at the beginning of the start-up using the FGI method, and determined the order of the investment determinants of investors. At the same time, we classified 41 start-ups related to the water industry into two groups: the group that received investment and the group that did not in the early stages of the start-up. Then we investigated the understanding of the investor's investment determinants, ranked them, and compared them by using the AHP technique. Through this, this research proposes five implications. First, it is important for start-ups in the early stages to receive seed investment to revitalize investment for startups in the water industry. For this, startups need to understand investors and prepare to attract investment with the perspective of angel investors rather than the perspective of VC investors. Second, Start-ups in the water sector should consider that the characteristics of the founder are important in order to receive seed investment, and also need to define their business at the industry and market level, and provide relevant rationale to meet the expectations of investors who value industry expertise and experience, and to increase the possibility of seed investment, which is important in the early stages of a startup. Third, institutions, such as K-water(Korea Water Resources Corporation), that support water industry startups need to conduct open innovation business opportunities discovery programs linked to startups so that startups currently participating in the startup support program could have business opportunities from the business infrastructure of platform-forming companies in the water industry. In particular, such institutions should help founders develop their industrial expertise and careers by supporting this type of start-up preparation process through the participation of in-house venture founders. Fourth, when K-water uses the government start-up support fund to discover and foster founders, it should increase initial contact with seed investors, conduct more thorough verification of business plans, and develop programs that use government start-up support funds to prepare a business suitable for seed angel investors. Fifth, K-water should support seed by connecting funds for initial investment among funds operated by itself. It is also necessary to develop a program that links the company receiving the seed investment with VC investment, not angel investment in cooperation with the VC fund operation entity participating as an LP so that companies that have attracted seed investment could attract follow-up VC investment.