• 전자공학회논문지B
• /
• 제32B권12호
• /
• pp.1545-1551
• /
• 1995

As the modern industrial processes become more complex, it is getting more difficult to model and control the processes. Naturally, an advanced type of DCS(Distributed Control System) with higher level functions is being sought. Advanced DCS is a DCS with advanced functions such as fault diagnosis, GPC(Generalized Predictive Control), NN(Neural Network), and Fuzzy Control. In this thesis, we have studied a fuzzy control algorithm for realizing an advanced DCS. Its algorithm is implemented in a form of function code which is a process control language, being used by the industrial engineers. To verify the realized function code of the fuzzy control, the function code is applied to a continuous casting process of the Pohang Iron & Steel Works in Kwangyang. The rules of the fuzzy control were collected via interviews of the field operators and their operation documents. Finally under a real-time operating system environment, usability of the function code of the fuzzy control is shown via simulation for the continuous casting process.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.516-522
• /
• 2009

The dimmable magnetic ballast which applies the variable inductor needs a switching process for the dimming process, and it consists of mechanical relays because of costs and reliabilities. However, it is hard to operate with correct timing in mechanical relay, so relays reduce their own life time in inductive applications. Moreover this creates a destructive problem at the switching process. The life time reduction of relays means the life time reduction of the ballast. Thus, in this paper, we described the problem at the witching process in the dimmable magnetic ballast with a variable inductor, which consists of relays and the soft AC switching method in order to solve the problems. As result, we achieved the improvement of the life time and reliability of the ballast.

• 한국공작기계학회논문집
• /
• 제10권4호
• /
• pp.76-83
• /
• 2001

In this study, the static and dynamic characteristics of turning process was modelled and the analytic realization of regen-erative chatter mechanism was discussed. In this regard, we have discussed on the comparative assessment of recursive times series modeling algorithms that can represent the machining process and detect the abnormal machining behaviors in precision turning operation. In this study, simulation and experimental work were performed to show the malfunction behaviors. For this purpose, new Recursive Extended Instrument Variable Method(REIVM) was adopted for the on-line system identification and monitoring of a machining process. Also, we can apply REIVE algorithms in real process for the detection of chatter frequency and dynamic property and analyze the stability lobe of the system by changing a parameter of cutting dynamics in regenerative chatter mechanics, if it is stable or unstable, Also, The stability lobe of chatter was analysed.

• 시스템엔지니어링학술지
• /
• 제13권2호
• /
• pp.1-8
• /
• 2017

The Core in Weapon system R&D is to realize the user required capabilities in limited schedule and cost. Therefore, the design of weapon system focuses to functional design for realization of requirement capabilities. However, the weapon system should not only basically bring the confidence to friendly forces bring fear to enemy forces to maximize the operational effectiveness of weapon systems and we consider the exterior design as the important factor to compete with foreign systems in international defense market besides capabilities and cost. For that reason, we made study case about the visual design decision process applied to the LVT(light tactical vehicle) project which was recent successful deployment among the many R&D projects of auto industry. Based on this case, this study suggests the necessity of the exterior design decision process the maneuver weapon system is developed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.971-974
• /
• 2001

In this study, the static and dynamic characteristics of endmilling process was modelled and the analytic realization of chatter mechanism was discussed. In this regard, We have discussed on the comparative assessment of recursive time series modeling algorithms that can represent the machining process and detect the abnormal machining behaviors in precision endmilling operation. In this study, simulation and experimental work were performed to show the malfunctional behaviors. For this purpose, new recursive(RLSM) were adopted for the on-line system identification and monitoring of a machining process, we can apply these new algorithms in real process for detection of abnormal chatter. Also, the stability lobe of chatter was analysed by varying parameter of cutting dynamices in regenerative chatter mechanics.

• 한국기계가공학회지
• /
• 제4권4호
• /
• pp.34-38
• /
• 2005

This is a widespread requirement for low cost lightweight thermal imaging sensors for both military and civilian applications. Today, a large number of uncooled infrared detector developments are under progress due to the availability of silicon technology that enables realization of low cost IR sensor. System prices are continuing to drop, and swelling production volume will soon drive process substantially lower. The feasibility of micromechanical optical and infrared (IR) detection using microcantilevers is demonstrated. Microcantilevers provide a simple Structurefor developing single- and multi-element sensors for visible and infrared radiation that are smaller, more sensitive and lower in cost than quantum or thermal detectors. Microcantilevers coated with a heat absorbing layer undergo bending due to the differential stress originating from the bimetallic effect. This paper reports a micromachined silicon uncooled thermal imager intended for applications in automated process control. This paper presents the design, fabrication, and the behavior of cantilever for thermomechanical sensing.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권3호
• /
• pp.56-59
• /
• 2006

UV laser micromachining is generally used to create microstructures for micro-products through a sequence of lithography-based photo-patterning steps. However, the micromachining process is not suitable for rapid realization of complex 3D micro-products because it depends on worker experience. In addition, the cost and time required to make many masks are excessive. In this paper, a more effective and rapid micro-manufacturing process, which was developed based on laser micromachining, is proposed for fabricating micro-products directly using UV laser ablation and phase-change filling. The filling process is useful for holding the micro-products during the ablation step. The proposed rapid micro-manufacturing process was demonstrated experimentally by fabricating 3D micro-products from functional UV-sensitive polymers using 3D CAD data.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.26-29
• /
• 2003

UV laser micromachining are generally used to create microstructures for micro product through a sequence of lithography-based photopatterning steps. However, the micromachining process is not suitable for the rapid realization of complex microscale 3D product because it depends on worker experiences, excessive cost and time to make many masks. In this paper, the more effective micro rapid manufacturing process, which is developed upon the base of laser micromachining. is proposed to fabricate micro products directly using UV laser ablation and phase change filling. The filling process is useful to hold the micro product during the next ablation step. The proposed micro rapid manufacturing process is also proven experimentally that enables to fabricate the 3D microscale products of UV sensitive polymer from 3D CAD data to functional micro parts.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.196-201
• /
• 2005

UV laser micromachining are generally used to create microstructures for micro product through a sequence of lithography-based photopatterning steps. However, the micromachining process is not suitable for the rapid realization of complex 3D micro product because it depends on worker experiences, excessive cost and time to make many masks. In this paper, the more effective micro rapid manufacturing process, which is developed upon the base of laser micromachining, is proposed to fabricate micro products directly using UV laser ablation and phase change filling. The filling process is useful to hold the micro product during the next ablation step. The proposed micro rapid manufacturing process is also proven experimentally that enables to fabricate the 3D micro products of UV sensitive polymer from 3D CAD data to functional micro parts.

• 수산해양교육연구
• /
• 제25권2호
• /
• pp.510-525
• /
• 2013

The purpose of this study is to investigate adult learners' experience by studying Humanities & General Education and get to know types and characteristics by classifying their learning experiences. This study uses grounded theory method which is suitable to investigate subjective experiences. In this study, data is collected from 13 adult learners by using Focus Group Interview(FGI) who participate in learning experience of Humanities & General Education of D university in Busan region. The data is categorized by open coding, axial coding and selective coding based on data analysis method of grounded theory and analysis processes. This study provides several outcomes as follows: 113 concepts, 38 subcategories and 16 upper categories are derived through the process of abbreviation and categorization of learning experience of Humanities & General Education. In a process of learning experience, this study shows interrelationship in a frame of paradigm and derives results of a process of abbreviation and categorization casual condition, contextual condition, phenomenon and interaction(help/obstruction factor). Tree types of learning experiences and characteristics are drawn as follows: 1) "Self-realization" is the type who participate in Humanities & General Education with desire of learning and they want to find identity and plan detailed future. 2) "The pursuit of happiness" has less desire on learning than "self-realization" and they are types who participate in Humanities & General Education because of someone else's help and suggestion. 3) "Local community" is the type who participate in Humanities & General Education because they feel necessity of social role and they expect local development based on their interest in local community. Several conclusions and suggestions are provided for further studies.