• Land and Housing Review
• /
• v.2 no.2
• /
• pp.163-170
• /
• 2011

Individual Vacuum Pressure Method (IVPM) is a soft ground improvement technique, in which a vacuum pressure can be directly applied to the vertical drain board to promote consolidation and to strengthen the soft ground. This method does not require surcharge loads, different to embankment or pre-loading method. In this study, the ground improvement efficiency of Individual Vacuum Pressure Method was estimated when suction pressure increases step by step(-20, -40, -60, -80kPa) with different periods. During Individual Vacuum Pressure Method process, surface settlement and pore pressure were monitored, and cone resistance as well as water content were also measured after the completion of Individual Vacuum Pressure Method treatment. From the results, optimum duration of each step of vacuum pressure was determined, and the settlement was calculated using FEM numerical analysis.

• Journal of Technologic Dentistry
• /
• v.28 no.1
• /
• pp.177-198
• /
• 2006

This study purposed to offer basic data for safety education of the dental laboratory technology after the investigation of how much the students in the dept. of dental laboratory technology are aware of the danger of each instrument, equipment or laboratory procedure that they use during laboratory and how much they demand safety education for this. The objects for this study were 423 students who were in the dept. of dental laboratory technology. In this regard, four colleges which have the dept. of dental laboratory technology were randomly selected to do a questionnaire survey. SPSS 12.0 was used to analyze the collected data. The results were as follows: As for satisfaction with their major, the respondents answered Satisfied (59.1%), Average (35.5%) and Dissatisfied (5.4%). In terms of the production process of a partial denture, they considered casting, polishing the casting body, polishing denture and burn out were most dangerous in order. As for the production process of a full denture, what they regarded as the most dangerous in order was polishing denture, deflasking and wax wash. Regarding the laboratory procedures of porcelain material, casting, trimming casting body, polishing porcelain material and burn out were the most dangerous procedures that they perceived. With regard to materials for use, alcohol, polishing, metal and wire were the most dangerous ones they thought. As for the handling characteristics of each material, small towns showed a higher demand for safety of the handling characteristics of alcohol. In terms of school year and sex, juniors and girls had higher scores in the demand for safety of the handling characteristics of acid. Regarding the handling characteristics of each equipment and instrument, all of small towns, juniors and girls showed the highest demand for safety of the handling characteristics of alcohol lamps. With regard to scores in the demand for safety of other characteristics, all of small towns, juniors and girls had the highest demand for safety of emergency treatment. Concerning the demand for safety education by the completion of safety education, in terms of each material, highest was the demand for safety of acid from the group which completed safety education. In regard to equipments and instruments, when it came to the demand for safety of the handling characteristics of casting machine, the educated group's demand for safety of acid was higher. Regarding other characteristics, the group which was not educated gained higher scores in the demand for safety of emergency treatment. 11. In all areas(materials, machines and others), small towns, girls and juniors showed higher scores in the demand for safety. Based on the above results, it was found that when students conduct the laboratory of dental technology, they would think that many materials, instruments or equipments for use are very dangerous. However, safety education was not fully given to them. Regarding the scores in the damned for safety education, the highest was 4.16 and the lowest was 3.43, which suggests that the scores were generally very high. In this regard, it is necessary to continue delivering a systematic safety education of materials, equipments or instruments used during the laboratory of dental technology. Therefore, through the analysis of each material, instruments or facility used in every laboratory and each process, safety accident types and accident risk factors should be investigated to develop educational materials for this. Moreover, it is required to open safety education as a single course of study or insert safety contents of all materials and machines into the class of dental laboratory instrument or dental materials for the purpose of a systematic and thorough safety education to prevent a safety accident during laboratory.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.2
• /
• pp.38-53
• /
• 2012

The transition process of the Balhae's capital system(都城制度) is a step-by-step marker of the completion of the state's governing system(支配體制). The most important subject in investigating the formation process of the capital of Balhae is Shanggyeongsheng(上京城). That's because Shanggyeongsheng(上京城) with a threefold-castle structure(三重城) of royal palace(宮城)-internal castle(內城)-external castle(外城) in the side-to-side checkerboard type symmetrical structure has the most paradigmatic castle structure not only in Balhae but also in East Asia. Despite the fact that such structure of Shanggyeongsheng(上京城) has a lot of similarities in the type with Sudangchangansheng(上京城) in Chungwon, scholars were skeptical that it had the same structure with Sudangchangansheng(上京城) at the time when transferring the capital. If we review the result of excavation of Shanggyeongsheng(上京城) and the findings of the senior scholars, it can be understood that Shanggyeongsheng(上京城) has not only the structure of Sudangchangansheng(上京城) but also accepted the principle of construction projected in it. It was confirmed that there is room for reconsideration on the theory of step-by-step construction(段階別築造) which was claimed based on the point that the construction like today's construction was impossible with the level of national power at that time in that the layers whose difference in construction time between the place No. 2, the central point of the royal palace, and the palaces No. 3~5 could be found were not identified, in that the whole Shanggyeongsheng(上京城) was planned by the same standard scale and finally in that there is a good possibility of accepting Samjoje(三朝制). The Shanggyeongsheng(上京城) is the result of the construction conducted by careful planning from the beginning, and with its close relation with the King Mun's(文王) policy of civilian government(文治), it shows that the governing system of the state was completed during the reign of King Mun. Therefore, the construction of the capital and the principle of construction(造營原理) projected in it are based on the premise that the Chungwon culture(中原文化) was being understood to a considerable level, and this means that the view of the world(天下觀) that he wanted to implement expanded throughout the whole Balhae.

• Journal of Nutrition and Health
• /
• v.48 no.6
• /
• pp.542-557
• /
• 2015

Purpose: The aim of this study is to develop an evaluation tool for operation of food safety and nutrition education projects for middle class elderly using the concept of the balanced score card. Methods: After the draft of the evaluation tool for the elderly training projects was completed, it was revised into the questionnaire and the validity of the indicators was tested by the Delphi group. The validity of the indicators was rated using a 5-point scale. The Delphi group consisted of 26 experts in the education sector, 16 government officials, and 24 professionals of the related area in communities. The first round test was conducted from July 9 to July 17, 2012, and 45 persons responded. The second round test was conducted from July 18 to July 25 and 32 persons responded. Results: The indicators, which were answered by more than 75 percent of the experts as 'agree' (4 points), 'strongly agree' (5 point) were included as the final indicators for the evaluation tool: 28 items out of 36 in outcome perspectives, 9 items out of 12 in process perspectives, and 17 out of 20 items in structure perspectives. The score was allocated as 50 points for outcome indicators, 20 points for process indicators, and 30 points for structure indicators. Conclusion: Completion of the evaluation tool is a prerequisite to determine whether the program is effectively implemented. The monitoring tool developed in the study could be applied for identification of the most optimal delivery path for the food safety and nutrition education program, for the spread of the food safety and nutrition education program for middle class elderly.

• Journal of Popular Narrative
• /
• v.27 no.2
• /
• pp.143-177
• /
• 2021

In the history of Korean literature, evaluations on 『Jirisan』 (Lee Byeong-ju) are bisected. Some evaluate it as a novel of authentic records which reproduces the history before and after the emancipation objectively while others say it takes advantage of anti-communistic ideology. This study analyzes that difference is resulted not from the distinction of perspectives but from cracks in the text. This is associated with the process of 『Jirisan』's publication. 『Jirisan』 was published serially in 『Sedae』 from 1972, and then, part of the manuscript was published in 1978 and the whole edition published in a series came to be republished in 1981. After that, in 1981 and 1985, part of the follow-up story was printed on the magazine, and then, with the memoirs of those two years as materials, the sixth and seventh volumes were again published through 'revision'. In other words, the publication of 『Jirisan』 is divided into that of the edition published in a series and that of the edition published in 1985 including the contents of revision. The theme of the work, 『Jirisan』 differs according to the point of its completion you may think of. This researcher pays attention to the difference of perspectives between the contents up to the fifth volume and those of the sixth and seventh volumes. Particularly, his evaluation on 'partisans' seems to have changed. In the edition published in a series, he extended 'partisans' into the independence movement in the Japanese colonial era under the Revitalizing Reforms system and adopted the representation of 'partisans' three-dimensionally whereas in the sixth and seventh volumes, he reproduced 'partisans' as beings that were the 'doctrinaire' and 'vicious' 'Reds' and had to be punished. In brief, with 『Jirisan』, he represented 'partisans' in the background of history before and after the emancipation and segmented the discourse, representation and ideology of the Cold War system, but in the process of revision, he stitched up 'partisans' as beings that were evil and losers. Consequently, with 『Jirisan』, he revealed the process of division and contention that proceeded around anti-communism/capitalism within the abyss of the 1970's to 80's and reproduced 'partisans' as beings that were either 'hostile (the Reds)' or 'unknown (losers)

• Journal of Distribution Research
• /
• v.14 no.2
• /
• pp.67-95
• /
• 2009

The purpose of this study is to empirically examine the transference of trust process, an important factor to consumer's purchase decision-making. Even though several researchers have discussed the trust transference process, there is no research related to this concept. Specifically we have focused on the transference of trust from the retailer to low involvement private label (PL) products. PL products were chosen as transference of trust occurs under ambiguity due to lack of information about the product and their manufacturer. PL products provide relatively less information than national brand (NB) products. In addition, retailers have been rapidly expanding their PL product categories. To identify the theoretical and empirical limitations of prior studies, we discuss several theories explaining the transference of trust: 'Balance theory' and 'availability heuristic' in transference of cognitive trust; 'affective transference' and 'affect as information' in transference of affective trust. An empirical test was performed. A self completion questionnaire was developed and administered to a convenience sample of PL users. 206 usable questionnaire were received. The results show that the transference of trust plays a mediating role linking the retailer to the manufacturer and to the product. Although our model, which included the transference process of trust as a mediating effect, did not improve the competitive model, the coefficients of the respective paths were found to be better. This study confirms the transference of cognitive trust from the retailer to both the manufacturer and the product, but not for affective trust. We offer the explanation that PL products may tend to have affective trust resulting from brand familiarity but not to their PL manufacturers.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.2
• /
• pp.108-121
• /
• 2016

The purpose of this study is to explore the issues and implications for landscape design education in Korean landscape architecture by analyzing the National Exhibition of Korean Landscape Architecture(NEKLA). This study analyzed the suggested topics and selected site as well as the commentary that appeared in the NEKLA's award-winning book published from 2004 to 2014. Results of the study are as follows: First, topics of NEKLA are not only competition guidelines but related to exploring new area and role of Korean landscape architecture. Second, most dealing with site is 'industrial heritage and regeneration space' and 'green infrastructure'. In more recent years, a larger variety of sites were addressed. Third, site locations are concentrated in metropolitan areas, and awards and participation of the non-metropolitan universities was very low. Fourth, seven criteria can be applied in a general landscape design competition such as 'newness of the concept(idea)', 'logicality of the design process', 'selection of site fidelity of analysis(interpretation)', 'presentation and completion of the master plan', 'consistency with the theme', 'linkage of concepts and results' and 'feasibility'. The evaluation criteria are increasing the sophistication of the design language to provide useful suggestions on how to find design education methods. Its implications are as follows: First, training is essential to derive innovative ideas, but it should avoid excessive concept-oriented education. Second, design education may include instruction on how to define the problems related with the site. Third, more emphasis on design logic is essential to transform the innovative concept to actual results. Fourth, 'slick images' unrelated to design should be suppressed. Fifth, practice is needed to solve the topics addressed in the design process of education. Sixth, 'feasibility' and 'creative thinking' are necessary to recognize a reciprocal relationship that is helpful to one another. This study uses direct quote commentary to minimize the subjectivity of the researcher and to trace issues of the contemporary landscape architecture more directly and vividly. This study is a record waiting for another review as meta-criticism. In this regard this study, the landscape architect of the next times will have a mean that historical records to review the current thinking of the landscape theory and design.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.9-17
• /
• 2010

The LCC (Liquid Cadmium Cathode) structure to be developed for inhibiting the formation and growth of the uranium dendrite has been known as a key part in the electrowinning process for the simultaneous recovering of uranium and TRU (TRans Uranium) elements from spent fuels. A zinc-gallium (Zn-Ga) experimental system which is able to be functional in aqueous condition and normal temperature has been set up to observe the formation and growth phenomena of the metal dendrites on liquid cathode. The growth of the zinc dendrites on the gallium cathode and the performance of the existing stirrer type and pounder type cathode structure were observed. Although the mechanical strength of the dendrites appeared to be weak in the electrolyte and easily crashed by the various cathode structures, it was difficult to effectively submerge the dendrite into the bottom of the liquid cathode. Based on the results of the aqueous phase experiments, a lab-scale electrowinning experimental apparatus which are applicable to the development of LCC srtucture for the electrowinning process was established and the performance tests of the different types of LCC structure were conducted to prohibit the uranium dendrite growth on LCC surface. The experimental results of the stirrer type LCC structures have shown that they could not effectively remove the uranium dendrites growing at the inner side of the LCC crucible and the performances of the paddle and harrow type LCC structure were similar. Therefore a mesh type LCC structure was developed to push down the uranium dendrites to the bottom of the LCC crucible growing on the LCC surface and at the inner side of the crucible. From the experimental results for the performance test of the mesh type LCC structure, the uranium was recovered over 5 wt% in cadmium without the growth of uranium dendrites. After completion of the experiments, solid precipitates of the bottom of the LCC crucible were identified as an intermetallic compound (UCd11) by the chemical analysis.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.357-368
• /
• 2008

On July 31, 2008, the Government issued the construction and operation permit for the first low and intermediate level radioactive waste disposal facility in the Republic of Korea. In this paper, the fundamental regulatory framework, regulatory requirements and technical standards of the disposal facility are introduced, and the phased review process adopted for evaluation of the safety of the facility is briefly described. The Atomic Energy Act sets forth a stepwise regulatory framework for the whole life-cycle of the disposal facility such as siting, design, construction, operation, closure and institutional control. More detailed regulatory requirements and technical standards are stipulated in the subsequent regulations of the Atomic Energy Act and a series of Notices issued by the Ministry of Eduction, Science and Technology. The Korea Institute of Nuclear Safety, as entrusted by the Ministry under the Atomic Energy Act, conducted safety review on the disposal facility, and evaluated the compliance with relevant criteria in all technical elements(i.e. siting and structural safety, radiological environmental impact, operational safety, systems and components, quality assurance, and total systematic performance assessment, etc.). The overall safety review process can be phased into inception phase, initial review phase, main review phase and completion phase. The review results were reported to and deliberated by the five Sub-committees of the Special Committee on Nuclear Safety, and then reported to the Ministry. The Ministry issued the construction and operation permit of the disposal facility through the deliberation of the review results by the Nuclear Safety Commission. Hereafter, the safety of the repository will be reassured by a series of subsequent regulatory inspections and reviews under the Atomic Energy Act. In addition, the licensee's continuous implementation of the "Safety Promotion Plan" may also enhance the long-term safety of the repository and contribute to build-up the confidence of the safety case.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.83-94
• /
• 2006

This paper describes ATM cell encipherment method using Rijndael Algorithm adopted as an AES(Advanced Encryption Standard) by NIST in 2001. ISO 9160 describes the requirement of physical layer data processing in encryption/decryption. For the description of ATM cell encipherment method, we implemented ATM data encipherment equipment which satisfies the requirements of ISO 9160, and verified the encipherment/decipherment processing at ATM STM-1 rate(155.52Mbps). The DES algorithm can process data in the block size of 64 bits and its key length is 64 bits, but the Rijndael algorithm can process data in the block size of 128 bits and the key length of 128, 192, or 256 bits selectively. So it is more flexible in high bit rate data processing and stronger in encription strength than DES. For tile real time encryption of high bit rate data stream. Rijndael algorithm was implemented in FPGA in this experiment. The boundary of serial UNI cell was detected by the CRC method, and in the case of user data cell the payload of 48 octets (384 bits) is converted in parallel and transferred to 3 Rijndael encipherment module in the block size of 128 bits individually. After completion of encryption, the header stored in buffer is attached to the enciphered payload and retransmitted in the format of cell. At the receiving end, the boundary of ceil is detected by the CRC method and the payload type is decided. n the payload type is the user data cell, the payload of the cell is transferred to the 3-Rijndael decryption module in the block sire of 128 bits for decryption of data. And in the case of maintenance cell, the payload is extracted without decryption processing.