• Transactions of Materials Processing
• /
• v.14 no.2 s.74
• /
• pp.147-152
• /
• 2005

The objective of this study is to develop an optimal drawing die for the clad wire drawing process. Cu-clad wire, which has the advantages of the high strength of a steel core and the electro-conductivity, corrosion resistance of a copper layer, is widely being used in the field of the telecommunications, electric-electronic and military technology industries. It is important to obtain uniformly coated rate when producing clad wires. Drawing process of clad wire will be influenced on damage and coated rate of core and sleeve for process variables such as semi-die angle and reduction in area. Therefore, in this study, the finite-element result obtained in this study was analyzed to the effect of the various forming parameters, which included the semi-die angle and reduction in area. The coated rate will be predicted with observation of copper coated rate variation according to total reduction in area and the optimal pass schedule will be set up through proper reduction in area and semi-die angle variation.

• Journal of Korean Foot and Ankle Society
• /
• v.11 no.2
• /
• pp.123-129
• /
• 2007

Purpose: The aim of this study was to analyze radiological change of Kager's triangle in patients with retrocalcaneal disorders. Materials and Methods: Areas of Kager's triangle and calcaneus were calculated with Heron's Formula. Average of area ratio (area of Kager's triangle / area of calcaneus) was calculated for comparison and analysis, according to disease activity and aging process. One-tailed Z-test was done with the average of area ratio. Results: Average of area ratio (area of Kager's trianlge / area of calcaneous) tends to decrease according to aging process and disease existence. Conclusion: Because area of Kager's triangle in patients with retrocalcaneal disorders tends to change according to disease activity and aging process, we should consider clinical correlation between the anatomical structure of Kager's triangle and retrocalcaneal symptoms.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.1-7
• /
• 2015

This research is to develop a possible process to apply k-means clustering to an efficient vehicle routing process under time varying vehicle moving speeds. Time varying vehicle moving speeds are easy to find in metropolitan area. There is a big difference between the moving time requirements of two specific delivery points. Less delivery times are necessary if a delivery vehicle moves after or before rush hours. Various vehicle moving speeds make the efficient vehicle route search process extremely difficult to find even for near optimum routes due to the changes of required time between delivery points. Delivery area division is designed to simplify this complicated VRPs due to time various vehicle speeds. Certain divided area can be grouped into few adjacent divisions to assume that no vehicle speed change in each division. The vehicle speeds moving between two delivery points within this adjacent division can be assumed to be same. This indicates that it is possible to search optimum routes based upon the distance between two points as regular traveling salesman problems. This makes the complicated search process simple to attack since few local optimum routes can be found and then connects them to make a complete route. A possible method to divide area using k-means clustering is suggested and detailed examples are given with explanations in this paper. It is clear that the results obtained using the suggested process are more reasonable than other methods. The suggested area division process can be used to generate better area division promising improved vehicle route generations.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.1
• /
• pp.1-10
• /
• 2002

The purpose of this article is to examine land use change in the fringe area of a metropolitan city through multi-temporal data analysis. Change detection has been regarded as one of the most important applications for utilization of remotely sensed imageries. Conventionally, two images were used for change detection, and Arithmetic calculators were generally used on the process. Meanwhile, multi-temporal change detection for a large number of images has been carried out. In this paper, a digital land-use map and three Landsat TM data were utilized for the multi-temporal change detection Each urban area map was extracted as a base map on the process of multi-temporal change detection. Each urban area map was converted to bit image by using boolean logic. Various urban change types could be obtained by stacking the urban area maps derived from the multi-temporal data using Geographic Information System(GIS). Urban change type map was created by using the process of piling up the bit images. Then the urban change type map was compared with each land cover map for the change detection. Dalseo-gu of Daegu city and Hwawon-eup of Dalsung-gun, the fringe area of Daegu Metropolitan city, were selected for the test area of this multi-temporal change detection method. The districts are adjacent to each other. Dalseo-gu has been developed for 30 yeais and so a large area of paddy land has been changed into a built-up area. Hwawon-eup, near by Dalseo-gu, has been influenced by the urbanization of Dalseo-gu. From 1972 to 1999, 3,507.9ha of agricultural area has been changed into other land uses, while 72.7ha of forest area has been altered. This agricultural area was designated as a 'Semi-agricultural area'by the National landuse Management Law. And it was easy for the preserved area to be changed into a built-up area once it would be included as urban area. Finally, the method of treatment and management of the preserved area needs to be changed to prevent the destruction of paddy land by urban sprawl on the urban fringe.

• Journal of the Korean Institute of Rural Architecture
• /
• v.8 no.2
• /
• pp.72-79
• /
• 2006

This study is to find out formation and development process of urban area in modern ages(1870-1949) focused Yanji city in the east-northern area in china. After the discharge of confinement in the late 19 century, the settlements were formed around east area, that is, the present Yanji urban area. The japanese consular office had been moved in east area since the beginning of the early 20 century, and so, the existing residents moved to west area. And the military and administrative facilities were located on the urban outskirts. After the September 18th Incident on 1932, Yanji had been constructed with the strategic center area under the urban planning. The administrative facilities of those days had been altered to he functional branches and educational facilities, and become the basis of development of Yanji city.

• Korean Institute of Interior Design Journal
• /
• v.23 no.2
• /
• pp.90-98
• /
• 2014

This study has analyzed the meaning of observation time in the course of acquiring the information of subjects who observed the space of hall in subway stations to figure out the process of spatial information excluded and the features of intensive searching. The followings are the results from the analysis of searching process with the interpretation of the process for information acquirement through the interpretation of observation area and time. First, based on the general definition of observation time, the reason for analyzing the features of acquiring spatial information according to the subjects' observation time has been established. The feature of decreased analysis data reflected that of observation time in the process of perceiving and recognizing spatial information, which showed that the observation was focused on the enter of the space during the time spent in the process of observing the space and the spent time with considerable exclusion of bottom end (in particular, right bottom end). Second, while the subjects were observing the space of hall in subway stations, they focused on the top of the left center and the signs on the right exit the most, which was followed by the focus on the both side horizontally and the clock on the top. Third, the analysis of consecutive observation frequency enabled the comparison of the changes to the observation concentration by area. The difference of time by area produced the data with which the change to the contents of spatial searching in the process of searching space could be known. Fourth, as the observation frequency in the area of I changed [three times -> six times -> 9 times], the observation time included in the area increased, which showed the process for the change from perception to recognition of information with the concentration of attention through visual information. It makes it possible to understand that more time was spent on the information to be acquired with the exclusion of the unnecessary information around.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1146-1150
• /
• 2009

Cadmium telluride (CdTe) is one of the most attractive photovoltaic materials due to its low cost, high efficiency and stable performance in physical, optical and electronic properties. Few researches on the influences of uniform surface on the photovoltaic characteristics in large-area CdTe solar cell were not reported. As the preceding study of the effects of thickness-uniformity on the photovoltaic characteristics for the large-area CdTe thin film solar cell, chemical mechanical polishing (CMP) process was investigated for an enhancement of thickness-uniformity. Removal rate of CdTe thin film was 3160 nm/min of the maximum value at the 200 $gf/cm^2$ of down force (pressure) and 60 rpm of table speed (velocity). The removal rate of CdTe thin film was more affected by the down force than the table speed which is the two main factors directly influencing on the removal rate in CMP process. RMS roughness and peak-to-valley roughness of CdTe thin film after CMP process were improved to 96.68% and 85.55%, respectively. The optimum process condition was estimated by 100 $gf/cm^2$ of down force and 60 rpm of table speed with the consideration of good removal uniformity about 5.0% as well as excellent surface roughness for the large-area CdTe solar cell.

• Journal of architectural history
• /
• v.22 no.1
• /
• pp.15-27
• /
• 2013

The purpose of this study is to analyze the changing process in the Ddeulzip of Jinsung Lee clan family. The subject of this study is clan family of Jinsung Lee in Andong Cultural Area. The period of Chosun Dynasty is divided into largely three parts. The establishment process for Jinsung Lee's family is analyzed during early (15~16C) and mid(17~18C) periods, and changing process is analyzed during mid(19~20C) and late periods. The characteristics of early Chosun Ddeulzip is that it made a foundation to construct a Ddeulzip form. Those of mid Chosun period is in their strong will to preserve their ancestral house which is well manifested through the restoration of Taegye's ancestral house. During the late Chosun period, many of the different styles of Ddeulzip were constructed due to the stable environment of both political and economical status. The residential house of Jinsung Lee family that were centered in Yean area include diverse forms for both high and middle class social status. Jinsung Lee family's Ddeulzip is thus considered to bring about the firm foundation as a clan family representing the Andong cultural area through the development of Ddeulzip.

• Journal of the Korean Society of Earth Science Education
• /
• v.2 no.1
• /
• pp.55-61
• /
• 2009

This study was designed to explore problem solving process to earth science area by elementary science gifted children, which compared and analyzed the questionnaires and problem solving to earth science area by gifted Science education center, Seoul National University Of Education, The analyzed results showed difference by gender that in the science study level at the time of entrance to the gifted Science education center, male students was the highest in the middle school as 37.5%, and female students in the elementary 6th grade as 61.5%. And male students were investigated to do more precedent study than female students. Secondly, in the problem solving process of earth science related problems, males made most use of problem solving process area(30.3%), and females symbolizing (27.5%) area. Thirdly, comparison of reasoning technology in problem solving process by gender indicated that both sexes made the most use of analytical reasoning (male 62.0%, female 53.6%) to solve problems.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.1
• /
• pp.122-129
• /
• 2008

Two-photon stereolithography is recognized as a promising process for the fabrication of three-dimensional (3D) microstructures with 100 nm resolution. Generally, beam-scanning system has been used in the conventional process of two-photon stereolithography, which is limited to the fabrication of micro-prototypes in small area of several tens micrometers. For the applications to 3D high-functional micro-devices, the fabrication area of the process is required to be enlarged. In this paper, large-area two-photon stereolithography (L-TPS) employing stage scanning system has been developed. Continuous scanning method is suggested to improve the fabrication speed and parameter study is conducted. An objective lens of high numerical aperture (N.A.) and high strength material were employed in this system. Through this work, 3D microstructures of $600*600*100\;{\mu}m$ were fabricated.