• The Korean Journal of Pain
• /
• v.33 no.1
• /
• pp.60-65
• /
• 2020

Background: Anatomic changes in the acromion have been considered a main cause of shoulder impingement syndrome (SIS). To evaluate the relationship between SIS and the acromion process, we devised a new morphological parameter called the acromion process cross-sectional area (APA). We hypothesized that the APA could be an important morphologic diagnostic parameter in SIS. Methods: We collected APA data from 95 patients with SIS and 126 control subjects who underwent shoulder magnetic resonance imaging (MRI). Then we measured the maximal cross-sectional area of the bone margin of the acromion process on MRI scans. Results: The mean of APAs were 136.50 ± 21.75 ㎟ in the male control group and 202.91 ± 31.78 ㎟ in the male SIS group; SIS patients had significantly greater APAs (P < 0.001). The average of APAs were 105.38 ± 19.07 ㎟ in the female control group and 147.62 ± 22.90 ㎟ in the female SIS group, and the SIS patients had significantly greater APAs (P < 0.001). The optimal APA cut-off in the male group was 165.14 ㎟ with 90.2% sensitivity, 91.4% specificity, and an area under the curve (AUC) of 0.968. In the female group, the optimal cut-off was 122.50 ㎟ with 85.2% sensitivity, 84.9% specificity, and an AUC of 0.928. Conclusions: The newly devised APA is a sensitive parameter for assessing SIS; greater APA is associated with a higher possibility of SIS. We think that this result will be helpful for the diagnosis of SIS.

• Nuclear Engineering and Technology
• /
• v.46 no.1
• /
• pp.117-124
• /
• 2014

The effect of various process variables on the powder properties of recycled $U_3O_8$ from MnO-$Al_2O_3$ doped large grain $UO_2$ pellets and the effect of those recycled $U_3O_8$ powders on the sintered density and grain size of MnO-$Al_2O_3$ doped large grain $UO_2$ pellets have been investigated. The evolution of morphology, size, and BET surface area of the recycled $U_3O_8$ powders according to the respective variation of the thermo-mechanical treatment variables of oxidation temperature, powder milling, and sequential cyclic heat treatment of oxidation and then reduction was examined. The correlation between the BET surface area of recycled $U_3O_8$ powder and the sintered pellet properties of MnO-$Al_2O_3$ doped pellets showed that the pellet density and grain size of doped pellets were increased and then saturated by increasing the BET surface area of the recycled $U_3O_8$ powder. The density and grain size of the pellets were maximized when the BET surface area of the recycled $U_3O_8$ powder was in the vicinity of $3m^2/g$. Among the process variables applied in this study, the cyclic heat treatment followed by low temperature oxidation was a potential process combination to obtain the sinter-active $U_3O_8$ powder.

• Progress in Superconductivity and Cryogenics
• /
• v.23 no.4
• /
• pp.14-18
• /
• 2021

The Mg-Powder-Compaction (MPC) process is proposed to fabricate the MgB₂ superconducting wires. Mg powder wall, similar to the Mg metal tube, inside the Nb outer sheath has been made and the stochiometric B powder was inserted into the wall. Even though the very high MgB₂ core density of 2.53 g/cm³ is obtained, the superconducting area fraction of MgB₂ is not high enough for the applications. In this work, an advanced MPC process was adopted by adding Mg powder into B powder. The Mg powder wall in the initial wire was fabricated by controlling the wall thickness while maintaining a constant density, and the mixture of B and Mg powder was filled into the Mg powder wall with the same filling density. It is found that the reduction in the area of the Mg powder wall proceeds similar to the wire, and the Mg powder wall is well maintained at the final wire diameter, which is advantage for the fabrication of long wires. With the advanced MPC process, as the added Mg is increased the densities of MgB₂ core is decreased and the porous structure is formed, it is found that the area fraction of superconducting MgB₂ increase up to the 37.7 % with the improved high critical current density (J_c) and the engineering critical current density (J_e).

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.41-47
• /
• 2012

To adapt to a rapidly changing business environment, introduction of new management techniques and innovative activities are crucial. In the case of small and medium companies, the compensation for scarce management resources and sustainable development can be obtained from advantage of management consulting. In this study, we propose the enterprise process evaluation model for small and medium business consulting, which can deploy the process improvement activities with considering the process maturity level within an organization. The process evaluation area of proposed Small and Medium Business, Staged Maturity Model (SMB-SMM) consists of four following parts: supply management, demand management, business management, and research and development (R&D) management. For each area, we set goals and also define the practices to achieve their goals respectively. By applying the SMB-SMM model to the small and medium sized companies, the process maturity level can be defined. And then to overcome the gap between the goals and evaluation results, the customized management consulting activities can be drawn from the predefined consulting approaches from the SMB-SMM.

• Journal of Korean Society for Atmospheric Environment
• /
• v.6 no.1
• /
• pp.43-50
• /
• 1990

In the estimation of grid type area source emissions, the factors by which emissions are distributed spatially must be considered comprehensively. The estimation process can be approached systematically by connecting the emission activity of air pollutants with land use pattern and the various impacts can be taken into account in the process by using such area information as land use, population, distribution of households, types of housing units, fuel consumption and so on. The estimation procedure was computerized in order to calculate area source emissions by grid information system. This computerization helped to augment effectiveness and efficiency not only by managing enormous data but also by performing diverse functions.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.38-42
• /
• 2001

A complete quantitative understanding of DT has been difficult because the process represents such a broad field of research. The experimental measurement of tool force is a single area of DT which still covers a wide range of possibilities. There are numerous parameters of the process which affect cutting forces. There are also many turnable materials of current interest. To obtain information toward a better understanding of the process, a few cutting parameters and materials were selected for detail study. It was decided that free-oxygen copper and 6061-T6 alloy aluminum would be the primary test materials. There are materials which other workers have also used because of there wide use in reflective applications. The experimental phase of the research project began by designing tests to isolate certain cutting parameters. The parameters chosen to study were those that affected the cross-sectional area of the uncut chip. The specific parameters which cause this area to vary are the depth of cut and infeed per revolution, or feedrates. Other parameter such a tool nose radius and surface roughness were investigated as they became relevant to the research.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.957-960
• /
• 1997

A complete quantitative understanding of DT has been difficult because the process represents such s broad field of research. The experimental measurement of tool force is a single area of DT which still covers a wide range of possibilities. Here are numerous parameters of the process which affect cutting forces. There are also many turnable materials of current interest. To obtain information toward a better understanding of the process, a few cutting parameters and materials were selected for detail study. It was decided that free-oxygen copper and 6061-T6 alloy aluminum would be the primary test materials. There are materials which other workers have also used because of there wide use in reflective applications. The experimental phase of the research project began by designing tests to isolate certain cutting parameters. The parameters chosen to study were those that affected the cross-sectional area of the uncut chip. The specific parameters which cause this area to vary are the depth of cut and infeed per revolution, or feedrates. Other parameter such a tool nose radius and surface roughness were investigated as they became relevant to the research.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.3
• /
• pp.1-9
• /
• 2011

The purpose of this research is to analyze the formational process of traditional house in old village that is the base of development on rural area. The method of this research is to use the family genealogy of the clan society village in the analysis of building times, and constructed with investigation by the residents. The results of this research are described as follows. 1. At the first period of settlement in the middle time of 18C, the small relative family was located at nearby of each other. They were divided three group. The first entered man is B-group. 2. At the period of 19C, the family was enlarged by the descendants. But at that time, the house was constructed by small type. And some tiled roof houses were built by A-group part at under area of the village. And the construction of village boundary was nearly completed. 3. At the early period of 20C, the great houses were constructed by C-group part at the upper area of the village. 4. At the late period of 20C, there were not changed largely. But small change was occurred by the divided of site. Except two house, every houses were changed to tiled roof house. The residents have continued the strong preservation mind of environment for 300 years. The family genealogy was very useful to analyze the formational process of traditional house in the clan society village.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1507-1515
• /
• 2015

The aim of this study was to suggest an enhancement of pedestrian safety through a service design process regarding urban design in new-town area. For this study, the concept, process and touchpoint, and survey design area, of the service design are reviewed as a theoretical study. According to this study, traffic signals, pedestrian environment, pedestrian overpass, and access traffic road were surveyed as touchpoints and a problem search, concept design, design building, institutional implement were analyzed as a service design process. As a result of these studies, the planning method for pedestrian safety based on service design process in terms of the external space design in a new-town area are suggested.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04a
• /
• pp.552-558
• /
• 1995

Stereolithography is a process used to rapidly produce polymer components directly from a computer-representation of the part. There are several considerations to be made for the efficient use of te process. Especially, the build-up orientation of part critically affect to the part accuracy, total build time and the volume of support structures. Te purpose of this study is to determine the optimal build-up part orientation for the SLA process with improving part accuracy, minimizing total build time, and the volume of supprot structures. The first factor is related to the area of surfaces which have staircase protrusions after solidification, the second factor is related to the total number of layers, and the third factor is related to the area of the surfaces which need to be supported with support structures. An algorithm is developed to calculate the staircase area with quantifying the process planning errors that the volume of materials is supposed to be removed or added to the part, and the optimal layer thickness for the SLA system whichcan hadle the variable layer thickness in different orientations achieved by rotating the given part to the specified finite directions. So the optimal part orientation is determined based on the user's selections of primary criterion and the optimal thickness of layers is calculated at any part orientations.