Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

RECYCLING PROCESS OF U3O8 POWDER IN MnO-Al2O3 DOPED LARGE GRAIN UO2 PELLETS

  • Received : 2013.05.24
  • Accepted : 2013.09.11
  • Published : 2014.02.25
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of various process variables on the powder properties of recycled $U_3O_8$ from MnO-$Al_2O_3$ doped large grain $UO_2$ pellets and the effect of those recycled $U_3O_8$ powders on the sintered density and grain size of MnO-$Al_2O_3$ doped large grain $UO_2$ pellets have been investigated. The evolution of morphology, size, and BET surface area of the recycled $U_3O_8$ powders according to the respective variation of the thermo-mechanical treatment variables of oxidation temperature, powder milling, and sequential cyclic heat treatment of oxidation and then reduction was examined. The correlation between the BET surface area of recycled $U_3O_8$ powder and the sintered pellet properties of MnO-$Al_2O_3$ doped pellets showed that the pellet density and grain size of doped pellets were increased and then saturated by increasing the BET surface area of the recycled $U_3O_8$ powder. The density and grain size of the pellets were maximized when the BET surface area of the recycled $U_3O_8$ powder was in the vicinity of $3m^2/g$. Among the process variables applied in this study, the cyclic heat treatment followed by low temperature oxidation was a potential process combination to obtain the sinter-active $U_3O_8$ powder.

Keywords

References

  1. K.W. Song, Y.H. Jeong, K.S. Kim, J.G. Bang, T.H. Chun, H.K. Kim and K.N. Song, "High Burn-up Fuel Technology in Korea", Nucl. Eng. and Tech. 40 (2008) 21-36. https://doi.org/10.5516/NET.2008.40.1.021
  2. Very High Burn-ups in Light Water Reactors, OECD NEA report NAEA No. 6224, (2006).
  3. Fuel failure in water reactors: Causes and mitigation, IAEATECDOC-1345 (2002).
  4. F. Dherbey, F. Louchet, A. Mocelling, S. Leclercq, "Elevated temperature creep of polycrystalline uranium dioxide : from microscopic mechanisms to macroscopic behavior", Acta Materialia 50 (2002) 1495-1505. https://doi.org/10.1016/S1359-6454(02)00007-1
  5. J. H. Yang, K. S. Kim, I. H. Nam, J. S. Oh, D. J. Kim, Y. W. Rhee, J. H. Kim, "Effect of step wise variation of oxygen potential during the isothermal sintering on the grain growth behavior in $Cr_2O_3$ doped $UO_2$ pellets," J. Nucl. Mater. 429, (2012) 25-33. https://doi.org/10.1016/j.jnucmat.2012.05.034
  6. K. W. Kang, J. H. Yang, J. H. Kim, Y. W. Rhee, D. J. Kim, K. S. Kim, K. W. Song, "Effects of $MnO-Al_2O_3$ on the Grain Growth and High-Temperature Deformation Strain of $UO_2$ Fuel Pellets," J. Nucl. Sci. Technol. 47, (2010) 304-307. https://doi.org/10.1080/18811248.2010.9711958
  7. C. Nonon, J.-C. Menard, S. Lansiart, J. Noirot, S. Martin, G.-M. Decroix, O. Rabouille, C. Delafoy, B. Petiprez, "PCI behavior of chromium oxide-doped fuel," Pellet-Clad interaction in Water Reactor Fuels, OECD NEA report No. 6004, (2004).
  8. L. Bourgeois, Ph. Dehaude, C. Lemaignan, A. Hammou, "Factors governing microstructure development of $Cr_2O_3$- doped $UO_2$ during sintering", J. Nucl. Mater. 297, 313 (2001). https://doi.org/10.1016/S0022-3115(01)00626-2
  9. H. Assmann, H. Bairiot, "Guidebook on Quality Control of Water Reactor Fuel", Tech. Report Series No.221, IAEA (1983).
  10. R. C. Hoyt, L. F. Grantham, R. G. Clark, P. W. Twinchell, "AIROX Dry Reprocessing of Uranium Oxide Fuels", ESGDOE-13276 (1979)
  11. K. W. Song, K. S. Kim, K. W. Kang, Y. H. Jung, "Grain size control of $UO_2$ pellets by adding heat-treated $U_3O_8$particles to $UO_2$ powder", J. Nucl. Mater. 317, (2003) 204. https://doi.org/10.1016/S0022-3115(03)00080-1
  12. K. W. Kang, J. H. Yang, J. H. Kim, Y. W. Rhee, D. J. Kim, K. S. Kim, K. W. Song, "Improvement of $UO_2$ pellet properties by Controlling the Powder Morphology of Recycled $U_3O_8$ powder", J. Nucl. Sci. Technol. 45, (2010) 1150-1154.
  13. J. H. Yang, K. W. Kang, K. S. Kim, Y. W. Rhee, , K. W. Song, "Recycling Process for Sinter-Active $U_3O_8$ powders", J. Nucl. Sci. Technol. 47, (2010) 538-541. https://doi.org/10.1080/18811248.2010.9711976
  14. E. V. Sidorov and V. L. Sofronov, "Investigation of the Kinetics of $U_3O_8$ Reduction by Hydrogen and Ammonia under Non-Isothermal Conditions" Chemistry for Sustainable Development 19, (2011) 315-319
  15. R. J. McEachern, P. Taylor, "A review of the oxidation of uranium dioxide at temperatures below $400^{\circ}C$", J. Nucl. Mater. 254, (1998) 87 https://doi.org/10.1016/S0022-3115(97)00343-7
  16. P. A. Tempest, P. M. Tucker, J. W. tyler, "Oxidation of$UO_2$ fuel pellets in air at 503 and 543K studied using X-ray photoelectron spectroscopy and X-ray diffraction," J. Nucl. Mater. 151, (1988) 269 https://doi.org/10.1016/0022-3115(88)90019-0
  17. R. J. McEachen, "A review of kinetic date on the rate of $U_3O_7$ formation on $UO_2$", J. nucl. Mater. 245, (1997) 238 https://doi.org/10.1016/S0022-3115(96)00733-7
  18. K. K. Bae, B. G. Kim, Y. W. Lee, M. S. Yang, H. S. Park, "Oxidation behavior of unirradiated $UO_2$ pellets", J. Nucl. Mater. 209 (1994) 274 https://doi.org/10.1016/0022-3115(94)90263-1
  19. R. J. McEachen, J. W. Choi, M. Kolar, W. Long, P. Taylor, A. D. Wood, "Determination of the activation energy for the formation of $U_3O_8$ on $UO_2$," J. Nucl. Mater. 249 (1997) 58. https://doi.org/10.1016/S0022-3115(97)00189-X
  20. P. Taylor, "Thermodynamic and kinetic aspects of $UO_2$ fuel oxidation in air at 400 to 2000 K", J. Nucl. Mater. 344 (2005) 206. https://doi.org/10.1016/j.jnucmat.2005.04.043
  21. F. Valdivieso, V. Francon, F. Byasson, M. Pijolat, A. Feugier, V. Peres, "Oxidation behaviour of unirradiated sintered $UO_2$ pellets and powder at different oxygen partial pressures, above $350^{\circ}C$," J. Nucl. Mater. 354 (2006) 85. https://doi.org/10.1016/j.jnucmat.2006.02.096
  22. G. Rousseau, L. Desgranges, F. Charlot, N. Milot, J. Niepce, M. Pijolat, F. Valdivieso, G. Baldinozzi, J. F. Berar, "A detailed study of $UO_2$ to $U_3O_8$ oxidation phases and the associated rate-limiting steps," J. Nucl. Mater. 355 (2006) 10. https://doi.org/10.1016/j.jnucmat.2006.03.015
  23. K. H. Kang, K. C. Song, H. S. Park, J. S. Moon, M. S. Yang, "Fabrication of simulated DUPIC fuel," Maters and Materials International 6 (2000) 583-588
  24. Y.-I. Jung, S.-Y. Choi, S.-J. L. Kang, Effect of oxygen partial pressure on grain boundary structure and grain growth behavior in $BaTiO_3$, Acta Materialia 54 (2006) 2849-2855. https://doi.org/10.1016/j.actamat.2006.02.025
  25. B.-K. Yoon, S.-Y. Choi, T. Yamamoto, Y. Ikuhara, S.-J. L. Kang, Grain boundary mobility and grain growth behavior in polycrystals with faceted wet and dry boundaries, Acta Materialia 57 (2009) 2128-2135. https://doi.org/10.1016/j.actamat.2009.01.005

Cited by

  1. Improvement of UO2 powder properties prepared from recycled aged fuel pellets vol.312, pp.1, 2017, https://doi.org/10.1007/s10967-017-5200-7