A Study on Cutting Force Characteristics in Diamond Turning Process

다이아몬드 터닝 가공공정에서의 미세절삭력 특성 연구

  • 정상화 (조선대 기계공학과) ;
  • 김상석 (조선대 대학원 기계공학과) ;
  • 차경래 (조선대 대학원 기계공학과) ;
  • 김건희 (한국기초과학지원연구원) ;
  • 김근홍 (한국기초과학지원연구원)
  • Published : 1997.10.01

Abstract

A complete quantitative understanding of DT has been difficult because the process represents such s broad field of research. The experimental measurement of tool force is a single area of DT which still covers a wide range of possibilities. Here are numerous parameters of the process which affect cutting forces. There are also many turnable materials of current interest. To obtain information toward a better understanding of the process, a few cutting parameters and materials were selected for detail study. It was decided that free-oxygen copper and 6061-T6 alloy aluminum would be the primary test materials. There are materials which other workers have also used because of there wide use in reflective applications. The experimental phase of the research project began by designing tests to isolate certain cutting parameters. The parameters chosen to study were those that affected the cross-sectional area of the uncut chip. The specific parameters which cause this area to vary are the depth of cut and infeed per revolution, or feedrates. Other parameter such a tool nose radius and surface roughness were investigated as they became relevant to the research.

Keywords