• Journal of Korean Society of Steel Construction
• /
• v.14 no.6
• /
• pp.783-791
• /
• 2002

An improved formulation for multi-objective optimization was proposed. This formulation was applied to steel seismic loads. The multi-objective optimization problem was formulated with minimum structural weight, maximum strstability. The global criterion method was employed to find a rational solution closest to the ideal solution for the optimization problem using standard steel profile, To efficiently solve the optimization problem, the decomposition meth both system-level and element-level was used. In addition, various techniques including efficient reanalysis technique intermediate variables and sensitivity analysis using an automatic differentiation(AD) were incorporated. Moreover the reamong section properties fitted to the section profile used in order to link the system level and the element level. From numerical investigation, it could be stated that the proposed method will lead to the more rational design compared with one.

• Analyses & Alternatives
• /
• v.6 no.1
• /
• pp.163-194
• /
• 2022

A transboundary environmental problem refers to an environmental problem that goes beyond a country's territory and damages neighboring countries. It is a difficult problem because, basically, it is a natural, rather than intentional, effect, and it is extremely hard to make a scientific consensus on the cause-effect relations between upstream and downstream nations. Air pollution, especially PM 2.5 and PM 10, is one of the typical cases of transboundary environmental problems in the Northeast Asia. This paper analyzes the constraints of environmental cooperation between China and South Korea to address transboundary air pollution issue. It argues that lack of trust and ideological hostility, rather than, scientific uncertainty, is the biggest obstacle for effective cooperation, and these hostile discourses and ideas are mostly generated by media in the downstream nation, the South Korea. In order to identify how South Korean media frames this issue, this paper searched newspaper articles in the six representative South Korean newspapers during the period of 2014 and 2020, and analyzed about 2,000 articles selected. It finds that South Korean media has framed the transboundary air pollution as a China bashing and related domestic political cleavage issue, while it neglects to show the cooperation attempts that the two countries have made to date. Also, while the media focuses on China hate frame, it has never reported the Chinese government's domestic policies to reduce air pollution and their results. Media's overuse of hate and blame frames not only has disrupted trust building but also it will delay a possible turning point of environmental cooperation between the two countries in the future.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.155-156
• /
• 2023

In the case of steel door frames commonly found in general buildings, there are various assembly methods such as rivets, bolts, and welding, but the welding method is generally used. However, this welding joint method has many problems, such as distortion due to heat and damage due to external shock. In particular, when used as a fire door, problems may occur in the event of a fire due to distortion caused by heat from welding and the weak welded joint area. In the case of rivet or welded joints, when moved after assembly, joint loosening due to external shock may occur. Problems may arise where the bonding strength becomes weak. In addition, with the recent increase in high-rise buildings and larger buildings, when assembly is completed and brought to the site, a place is needed to store it, and in addition, there is a problem in that it has to be transported several times in small quantities to the installation site, which is another problem of time and cost loss. This is coming to the fore. In order to fundamentally solve this problem, we have researched and developed a non-welding door frame that can be assembled on site. We have researched and developed three assembly methods: screw-type, insert-type, and protrusion-type. Non-welded door frames are small in size and easy to package, making them advantageous for domestic and overseas exports.

• Journal of the Korean earth science society
• /
• v.40 no.3
• /
• pp.283-299
• /
• 2019

The purpose of this study is to identify the conflict frames in the process of designating the national geopark, among local residents, geology experts, and local public officials. For this purpose, the progress of the public hearing on the implementation of the national geopark in Buan and Gochang were recorded with prior consent from the participants and transferred in text form. Subsequently, we developed a reference frames for analyzing conflict frames through literature review, and analyzed the conflict frames by three researchers based on this. These analyzed conflict frames were again analyzed by using semantic network analysis. The results are as follows. In the Buan area, 'Sagree' frame, 'Snot' frame, and 'Sdisagree' frame showed high eigenvector centrality, and 'Gharm' frame and 'Cmeconomy' frame were closely connected to the 'Snot' frame located at the center of the semantic network. In the Gochang area, 'Aresource' frame, 'Cmexample' frame, and 'Gharm' frame showed high eigenvector centrality, and 'Gharm' frame and 'Cmproblemsolution' frame were closely connected to the 'Snot' frame located at the center of the semantic network. Through these results, we could see that there is still the conflict about the certification of national geopark between stakeholders in Buan, and that Gochang's stakeholders are proudly aware of their own resources. The Buan's stakeholders focused on economic gains in resolving conflicts, while Gochang's stakeholders focused on problem solving. This result of this study provides information in conflict from the national geopark in other regions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2A
• /
• pp.81-92
• /
• 2010

In design of steel frames, it is generally believed that elastic system buckling analysis cannot predict real behaviors of structures, while inelastic system buckling analysis can give informative buckling behaviors of individual members considering inelastic material behavior. However, the use of Euler buckling equation with these system buckling analyses have the inherent problem that the methods evaluate unexpectedly large effective lengths of members having relatively small axial forces. This paper proposes a new method of obtaining elastic and inelastic effective lengths of all members in steel frames. Considering a fictitious axial force factor for each story of frames, the proposed method determines the effective lengths using the inelastic stiffness reduction factor and the iterative eigenvalue analysis. In order to verify the validity of the proposed method, the effective lengths of example frames by the proposed method were compared to those of previously established methods. As a result, the proposed method gives reasonable effective lengths of all members in steel frames. The effect of inelastic material behavior on the effective lengths of members was also discussed.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.7
• /
• pp.78-88
• /
• 1997

A three dimensional-two spatical dimensions plus time-image segmentation is widely used in a very low bit rate image sequence coding because it can solve the region correspondence problem. Mathematical morphology is a very efficient tool for the segmentation because it deals well with geometric features such as size, shape, contrast and connectivity. But if the motion in the image sequence is large in time axis, the conventional 3D morphological segmentation algorithm have difficulty in solving region correspondence problem. To alleviate this problem, we propose the hierarchical image sequence segmentation algorithm that uses the region motion information. Since the motion of a region in previous level affects that in current level uses the previous motion information to increase region correspondence. Simulation result shows improved performance for sequence frames with large motion.

• Proceedings of the Korea Database Society Conference
• /
• 1999.06a
• /
• pp.281-287
• /
• 1999

Decision class analysis (DCA) is viewed as a classification problem where a set of input data (situation-specific knowledge) and output data (a topological leveled influence diagram (ID)) is given. Situation-specific knowledge is usually given from a decision maker (DM) with the help of domain expert(s). But it is not easy for the DM to know the situation-specific knowledge of decision problem exactly. This paper presents a methodology fur sensitivity analysis of DCA under incomplete information. The purpose of sensitivity analysis in DCA is to identify the effects of incomplete situation-specific frames whose uncertainty affects the importance of each variable in the resulting model. For such a purpose, our suggested methodology consists of two procedures: generative procedure and adaptive procedure. An interactive procedure is also suggested based the sensitivity analysis to build a well-formed ID. These procedures are formally explained and illustrated with a raw material purchasing problem.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 1999.03a
• /
• pp.281-287
• /
• 1999

Decision class analysis (DCA) is viewed as a classification problem where a set of input data (situation-specific knowledge) and output data(a topological leveled influence diagram (ID)) is given. Situation-specific knowledge is usually given from a decision maker (DM) with the help of domain expert(s). But it is not easy for the DM to know the situation-specific knowledge of decision problem exactly. This paper presents a methodology for sensitivity analysis of DCA under incomplete information. The purpose of sensitivity analysis in DCA is to identify the effects of incomplete situation-specific frames whose uncertainty affects the importance of each variable in the resulting model. For such a purpose, our suggested methodology consists of two procedures: generative procedure and adaptive procedure. An interactive procedure is also suggested based the sensitivity analysis to build a well-formed ID. These procedures are formally explained and illustrated with a raw material purchasing problem.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.803-806
• /
• 2000

The correspondence problem is known to be difficult to solve because false positives and false negatives almost always exist in real image sequences. In this paper, we propose a robust feature tracking algorithm considering incomplete trajectories such as entering and/or vanishing trajectories. We solve the correspondence problem as the optimal graph search problem, by considering false feature points and by properly reflecting motion characteristics. The proposed algorithm finds a local optimal correspondence so that the effect of false feature points can be minimized in the decision process. The time complexity of the proposed graph search algorithm is given by O(mn) in the best case and O(m$^2$n) in the worst case, where m and n are the number of feature points in two consecutive frames. The proposed algorithm can find trajectories correctly and robustly, which has been shown by experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.827-833
• /
• 2011

Directional MAC protocols have drawn great attentions recently in super high speed wireless local/personal area networks due to their higher antenna gain, better spatial reuse, longer transmission range, and lower interference. Despite of these merits, directional MAC protocols suffer from deafness problem. The deafness problem occurs if a node does not answer an RTS frame addressed to it. To overcome this problem, directional MAC protocols have aimed at avoiding the deafness problem using multiple control frames or advance notice techniques or distinguishing deafness from collision. In this paper, we analyze the performance of these schemes in deafness environments with some scenarios. Through performance analysis, we compare the performance of these schemes through evaluating actual network throughput.