• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.10 no.1
• /
• pp.50-63
• /
• 1999

Introduction：Test anxiety is a pervasive problem among high school students in Korea. While anxiety in test situations may actually facilitate the performance of some students, more often it is disruptive and leads to performance decrements. Over the past years, many child psychiatrists have become concerned with understanding the nature of test anxiety, but it is not clearly understood yet. In order to understand the nature of test anxiety, the relationship between test anxiety and depression, state anxiety, trait anxiety, temperament and family environment were examined. Methods：The Test Anxiety Inventory, Chidlren's Depression Inventory, State-Trait Anxiety Inventory, Temperamnet and Family Environment Scale Scale were administered to 576 high school students in Seoul. The relationships between test anxiety and other measures were tested using Pearson correlation coefficients and to test the causal relationship among the variables, regression analysis was performed. Results：The correlation coefficients between test anxiety and depression, state anxiety, trait anxiety, temperament and family environment scale were 0.42(p<0.01), 0.34(p<0.05), 0.38(p<0.05), 0.36(p<0.05) and -0.23(p<0.01), respectively. Regression analysis showed that only state and trait anxiety had direct causal relationship with test anxiety. Depression, temperament and family environment were indirecly related with test anxiety. Conclusions：This study indicates that the level of state and trait anxiety are directly related with test anxiety, and other variables such as temperament, family environment and depression are indirectly related with test anxiety. Thus, in order to develop the effective methods for treatment, these psychopathological characteristics should be kept in mind and the most important factors are the levels of state and trait anxiety.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.46-53
• /
• 2010

Purpose: The static image of nuclear medicine study should be acquired without a motion, however, it is difficult to acquire static image without movement for the serious patients, advanced aged patients. These movements cause decreases in reliability for quantitative and qualitative analysis, therefore re-examination was inevitable in the some cases. Consequently, in order to improve the problem of motion artifacts, the authors substituted the dynamic acquisition technique for the static acquisition, using motion correction. Materials and Methods: A capillary tube and IEC body phantom were used. First, the static image was acquired for 60 seconds while the dynamic images were acquired with a protocol, 2 sec/frame${\times}$30 frames, under the same parameter and the frames were summed up into one image afterwards. Also, minimal motion and excessive motion were applied during the another dynamic acquisition and the coordinate correction was applied towards X and Y axis on the frames where the motion artifact occurred. But the severe blurred images were deleted. Finally, the resolution and counts were compared between the static image and the summed dynamic images which before and after applying motion correction, and the signal of frequency was analysed after frequency spatial domain was transformed into 2D FFT. Supplementary examination, the blind test was performed by the nuclear medicine department staff. Results: First, the resolution in the static image and summed dynamic image without motion were 8.32 mm, 8.37 mm on X-axis and 8.30 mm, 8.42 mm on Y-axis, respectively. The counts were 484 kcounts, 485 kcounts each, so there was nearly no difference. Secondly, the resolution in the image with minimal motion applying motion correction was 8.66 mm on X-axis, 8.85 mm on Y-axis and had 469 kcounts while the image without motion correction was 21.81 mm, 24.02 mm and 469 kcounts in order. So, this shows the image with minimal motion applying motion correction has similar resolution with the static image. Lastly, the resolution in the images with excessive motion applying motion correction were 9.09 mm on X-axis, 8.83 mm on Y-axis and had 469 kcounts while the image without motion correction was 47.35 mm, 40.46 mm and 255 kcounts in order. Although there was difference in counts because of deletion of blurred frames, we could get similar resolution. And when the image was transformed into frequency, the high frequency was decreased by the movement. However, the frequency was improved again after motion correction. In the blind test, there was no difference between the image applying motion correction and the static image without motion. Conclusion: There was no significant difference between the static image and the summed dynamic image. This technique can be applied to patients who may have difficulty remaining still during the imaging process, so that the quality of image can be improved as well as the reliance for analysis of quantity. Moreover, the re-examination rate will be considerably decreased. However, there is a limit of motion correction, more time will be required to successfully image the patients applying motion correction. Also, the decrease of total counts due to deletion of the severe blurred images should be calculated and the proper number of frames should be acquired.

• Korean Journal of Veterinary Research
• /
• v.50 no.3
• /
• pp.213-220
• /
• 2010

Salmonella (S.) Enterica infection ranks among the most common food borne bacterial infections worldwide. Although there are six subspecies of S. Enterica, the vast majority of human and animal infections are caused by strains belonging to subspecies 1 serovar Typhimurium and Enteritidis. Recent reports on antibiotic resistance of Salmonella spp. are rising steadily. The increasing problem of antibiotic resistance has rekindled interest in bacteriophage to therapy. Therefore, we investigated the efficacy of bacteriophage in S. enterica serovar Enteritidis infected mice and pigs by measuring of body condition, body weight, bacterial colonization and weight of organs based on the in vitro analysis. In vitro experiment, phage cultured with S. Enteritidis showed clear lysis pattern, the plaque forming unit (PFU) of our phage culture was $1.5{\times}10^{11}PFU/mL$, and phage showed its maximum activity at 4 h post inoculation. In mouse experiment, there was no significant difference among experimental groups in the general body conditions and body weight of mice. However, there was difference in weight of liver and spleen depending on the experimental group (p < 0.05). The weight of liver and spleen were reduced by the phage treatment. Also bacterial colonization in spleen and liver were significantly reduced by the phage treatment. In pig experiment, the general body conditions and body temperature exhibited not much difference among the pigs except few pigs in group 3 which showed poor body conditions. From the feces in each group, we could isolate the S. Enteritidis only from group 3. Bacterial enrichment culture was necessary for isolating the bacteria from 5 dpi and 10 dpi, however direct isolation was possible from 15 dpi feces. In phage treated group, postmortem lesion was better than non-phage treated group. Recently, antibiotic resistance concerns on the food-borne bacterial pathogens have been increasing because of the wide spread of the antibiotics resistance genes. This concern is widely transmitted to the human related public health. As one of the alternative treatments on the bacterial pathogens, attempt using phages have been made to control the bacterial diseases. The positive possibility of the trail using phage was observed to control the S. enterica serovar Enteritidis in this study even though the further analysis has been remained.

• Korean Security Journal
• /
• no.31
• /
• pp.73-100
• /
• 2012

Republic of Korea for the last 2012 nuclear security summit in Seoul in three days from March 26, has held great success. This industry watchers at home and abroad through professional meetings and private organizations to promote global nuclear security was intended to draw, for the preparation of this event the most important one of the things that should be addressed at the meeting was over the top guard. The national guard of heads of state and nationally significant as the important issues should be dealt with. So who is responsible for national security summit national guard for a successful guard against participants should have a higher understanding, these stories ever to be dealt with important security subjects is the psychological state of cognition. This study is currently a source of honor to escort the psychological state of subjects, and whether the search as I looked at cognition. Qualitative research methods to conduct research in-depth interview technique was used for one of the transcribed data analysis program, a non-quantitative data were analyzed using NVivo 8. As a result of this study, analysis of the problem compared with the usual methods 39 (72.2%), fine-grained observation and 15 (27.7%), through the media how cognition 41 (73.2%), marginal help of 15 (26.7%) were. The usual comparison with how honored Issue sources to detect security of those words and actions and facial expressions, etc. Security of subjects over the state of mind cognition that he, detailed observation of the national guard to security subjects the psychological state of cognition which are pre-Thorough Information subjects that can have all the information about security and the state can be obtained by saying that. Media coverage through a cognitive approach national guard of the media coverage to understand the security subjects of the political situation to understand the prerequisite that were marginal for help through the cognitive approach of security subjects surrounding the execution of security workers, Secretary in charge of protocol and security, and be propagated through the selection techniques to be utilized was that.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.1
• /
• pp.1-11
• /
• 2008

Statement of problem: Over the past decade, increased demand for esthetically pleasing restorations has led to the development of all-ceramic systems. Recent reports suggest that the all-ceramic crowns have excellent physical properties, wear resistance, and color stability. In addition, numerous ceramics have excellent biocompatibility, a natural appearance, and improved physical bonding with resin composite luting agents. However, the brittle nature of ceramics has been a major factor in their restriction for universal usage. Functional occlusal loading can generate stress in the luting agent, and the stress distribution may be affected by the marginal geometry at the finish line. Tooth preparation for fixed prosthodontics requires a decision regarding the marginal configuration. The design dictates the shape and bulk of the all ceramic crowns and influences the fit at the margin. Purpose: The purpose of this study was to evaluate the stress distribution within marginal configurations of all- ceramic crowns (90-degree shoulder, 110-degree shoulder, 135-degree shoulder). Material and methods: The force is applied from a direction of 45 degrees to the vertical tooth axis. Three-dimensional finite element analysis was selected to determine stress levels and distributions. Results and conclusion: The result of stress level for the shoulder marginal configuration was more effective on stress distribution at 135-degree shoulder margin. But the stresses concentrated around at 135-degree shoulder margin. The stress decreased apically at the surface between cements and alumina core, and increased apically at the surface between alumina core and veneering porcelain.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.375-390
• /
• 2009

Statement of problem: Implant supported overdenture is accepted widely as a way to restore edentulous ridge providing better retention and support of dentures. Various types of attachment for overdenture have been developed. Purpose: The purpose of this study was to investigate the influence of attachment type in implant overdentures on the biomechanical stress distribution in the surrounding bone, prosthesis and interface between implant and bone. Material and methods: Finite element analysis method was used. Average CT image of mandibular body(Digital $Korea^{(R)}$, KISTI, Korea) was used to produce a mandibular model. Overdentures were placed instead of mandibular teeth and 2mm of mucosa was inserted between the overdenture and mandible. Two implants($USII^{(R)}$, Osstem, Korea) were placed at both cuspid area and 4 types of overdenture were fabricated ; ball and socket, Locator, magnet and bar type. Load was applied on the from second premolar to second molar tooth area. 6 times of finite element analyses were performed according to the direction of the force $90^{\circ}$, $45^{\circ}$, $0^{\circ}$ and unilateral or bilateral force applied. The stress at interface between implants and bone, and prosthesis and the bone around implants ware compared using von Mises stress. The results were explained with color coded graphs based on the equivalent stress to distinguish the force distribution pattern and the site of maximum stress concentration. Results: Unilateral loading showed that connection area between implant fixture and bar generated maximum stress in bar type overdentures. Bar type produced 100 Mpa which means the most among 4 types of attachments. Bilateral loading, however, showed that bar type was more stable than other implants(magnet, ball and socket). 26 Mpa of bar type was about a half of other types on overdenture under $90^{\circ}$ bilateral loading. Conclusions: In any directions of stress, bar type was proved to be the most vulnerable type in both implants and overdentures. Interface stress did not show any significant difference in stress distribution pattern.

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.156-175
• /
• 2013

The purpose of this study was to verify that the impacts of experience of donation for education to improve the teaching efficacy of pre-technology teacher. The Invention experience of donation for education was performed with Invent-touring sponsored by Chunnam National University Invention Education Center for Teachers and was included by development of creative problem solving program, program execution and evaluation. Research participants were Technology education Majors and minors 20 students. The active locations were D children community center, K alternative school, D Elementary School and D middle school. For the study, various literature researches were reviewed intensively about donation for education and teaching efficacy. The instrument for the study was the modified STEBI(Science Teaching Efficacy Beliefs Instrument) for technology education by 3 experts. This study was designed by single group pre and post test design (One-Group Pretest-Posttest Design) and was conducted by the pre-test and post-test. Check the reliability of the tool was conducted with Cronbach ${\alpha}$ coefficient analysis, pre-test 0.840, post-test 0.746. The analysis of data from the 5% significance level, paired sample t-test was performed using the SPSS 19.0 statistical tool. The results were as follows: 1. Teaching efficacy of pre-technology teachers who participated in the invention experience for educational donation technology has improved. 72. The qualitative study was performed by the interviews with students who participated in. Humanism was positively change and learning opportunity was provided to develop the competence of technology education teacher. Based upon the conclusion of this study, the donation activity for invention education need to use learning strategies for pre-technology teacher to improve teaching efficacy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.215-225
• /
• 2016

This study seeks to find an alternative to the requirement for proving the competitiveness of Korean performing arts before entering into the overseas market by deriving the factors causing entry into the market to be delayed based on an analysis of the current status. Between 2007 to 2014, the overseas revenues from Korean performing arts increased by 16.4% compared to the total amount of financial support, as the number of free performances given overseas and the average guaranteed number of performances overseas are both at a standstill. Also, the size of the audience increased by a mere 3.3 times, which is an even lower growth rate than that for the number of performances, 3.8 times, during the same period. Furthermore, the audience size per unit is suffering from long-term stagnation. The main causes are as follows: 1) applying one-dimensional methods to performing arts exchanges and expanding the overseas market, 2) the existing confused concepts between profit and non-profit contents, 3) the weaknesses of the market expansion strategy, because of programming practices focusing on providers, such as presenters and producers, rather than consumers. As a result, the necessary basic research, including consumer surveys, has not been done yet. In order to understand the implications of this analysis and solve the problem of the delayed overseas expansion of Korean performing arts, the Korean wave industry was examined as a representative example. Consumer surveys for the performing arts, possibly benchmarked to the "Korean Wave Consumer Survey Index (KWCSI)", are expected to be done in the near future. In addition, through the development of a specific consumer index of the performing arts, customized marketing strategies by continent and country need to be established. This empirical study of the overseas expansion of performing arts can be utilized as a bridge between the academic and real worlds. This work may also enable a variety of strategies to be established for the overseas expansion of the performing arts.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.8-16
• /
• 2013

Currently, global warming has advanced by the usage of fossil fuels such as coal and petroleum. and the atmosphere temperature in the world of 100 years(1906~2005) has been risen $0.74^{\circ}C{\pm}0.18^{\circ}C$, IPCC announced that the global warming effect of last decade was nearly doubled compared to the changes($0.07^{\circ}C{\pm}0.02^{\circ}C$/10year) in the past 100 years. Moreover, due to the global warming, heat wave, heavy snow, heavy rain, super typhoon, were caused and are increasing to happen in the world continuously causing damages and destruction of social infrastructures, where concrete structures are suffering deterioration by long-term extreme climate changes. to solve these problems, the new construction technology and codes are necessary. In this study, to solve these problems, experiments on a variety of cases considering the temperature and humidity, the main factors of climate factors, were performed, and the cases are decided by temperature and humidity. The specimens were tested in compressive strength test and split tensile test by the curing age(3,7,28 days) morever, performance based design(PBD) method was applied by using the satisfaction curve developed from the experiment date. PBD is the design method that gathers the current experimental analysis and past experimental analysis and develops the material properties required for the structure, and carries out the design of concrete mix, and it is recently studied actively worldwide. Also, it is the ultimate goal of PBD to design and perform on structures have sufficient performance during usage and to provide the problem solving for various situations, Also, it can achieve maximum effect in terms of functionality and economy.

• Journal of Science Education
• /
• v.38 no.3
• /
• pp.525-542
• /
• 2014

This study was performed to look into the difficulty of students in understanding science stories in 6th grade science textbooks and to analyze those factors. To do this, 6th grader (N=65) were selected from J Elementary School located in Gyeonggi-do Siheung-si as study subjects. 26 science stories in 6th grade science textbooks were classified by field and context (complement of knowledge, science history of scientists, science in life, cutting-edge science technology, environment issues) in which the characteristics were investigated and analyzed. Also, a survey about the difficulty in understanding science stories(26 items) was conducted(65 students) and a semi-structured interview was conducted for students to clarify the meaning of collected data from surveys(4 students). As result of analyzing surveys on science story context in science textbooks and interviews, 4 fields of 'energy,' 'matter,' 'life,' and 'earth' were evenly mentioned. Science in life and complement of science knowledge were mentions most for context and this had relation with the characteristic of science textbooks to provide many opportunities to apply learned knowledge in actual social issues. Reactions of students on science stories were mostly positive that they help studying science, but there was also difficulty in well understanding science stories. Difficulty of understanding context, problems of context suggesting methods, difficulty of science terminology, lack of interest, and etc. were analyzed as factors. Specific causes were mentioned to be description type class, unimportant context, lack of explanation on suggested context, problem of pictures by students.