• 한국재료학회지
• /
• 제27권11호
• /
• pp.583-589
• /
• 2017

Ceramic ink-jet printing has become a widespread technology in ceramic tile and ceramicware industries, due to its capability of manufacturing products on demand with various designs. Generally, thermally stable ceramic inks of digital primary colors(cyan, magenta, yellow, black) are required for ink-jet printing of full color image on ceramic tile. Here, we synthesized an aqueous glass-ceramic ink, which is free of Volatile organic compound(VOC) evolution, and investigated its inkjet printability. $CoAl_2O_4$ inorganic pigment and glass frit were dispersed in aqueous solution, and rheological behavior was optimized. The formulated glass-ceramic ink was suitably jetted as single sphere-shaped droplets without satellite drops. After ink-jet printing and firing processes, the printed glass-ceramic ink pattern on glazed ceramic tile was stably maintained without ink spreading phenomena and showed an improved scratch resistance.

• 한국재료학회지
• /
• 제29권10호
• /
• pp.639-646
• /
• 2019

Ink-jet printing is a manufacturing process technology that directly prints a digitalized design pattern onto a substrate using a fine ink jetting system. In this study, environmentally friendly yellow aqueous ceramic ink is synthesized by mixture of distilled water, yellow ceramic pigment and additives for ink-jet printing. The graft polymer, which combines electrostatic repulsion and steric hindrance mechanism, is used as a surfactant for dispersion stability of aqueous ceramic ink. Synthesized ceramic ink with graft polymer surfactant shows better dispersion stability than did ceramic ink with PAA surfactant; synthesized ink also shows desirable ink-jet printability with the formation of a single ink droplet during printability test. Finally, ceramic ink printed on glass substrate and ceramic ink with graft polymer surfactant shows a high contact angle without surface treatment on glass substrate. Consequently, it is confirmed that the ceramic ink with graft polymer surfactant can achieve high printing resolution without additional surface treatment process.

• 한국인쇄학회지
• /
• 제29권2호
• /
• pp.33-44
• /
• 2011

The inorganic powder EL lamp was made by screen printing technique with a phosphor ink and a dielectric ink. The thickness of a phosphor ink layer and a dielectric ink layer is $35{\mu}m$ and $54{\mu}m$ respectively. A increasing ratio of the luminance of inorganic powder EL lamp to be a 1P1PD-phosphor ink layer in which increased voltage at constant frequency is higher 12% than when increased frequency at constant voltage. It is higher 57% than when increased frequency at constant voltage that the rate of increase of the luminance of inorganic powder EL lamp to be a 2PD-phosphor ink layer in which increased voltage at constant frequency. Finally, when increased voltage at constant frequency, a increasing ratio of the luminance of inorganic powder EL lamp to be a 2PD-phosphor ink layer is higher about 40% than that to be a 1P1PD-phosphor ink layer.

• 한국전기전자재료학회논문지
• /
• 제28권9호
• /
• pp.593-597
• /
• 2015

Ni ink for electrohydrodynamic (EHD) continuous jet printing has been developed by using Ni nanoparticles mixed with conhesiveness provider. EHD continuous jet printing was used in order to realize $20{\mu}m$ pattern width. Ink stability was investigated by using Turbi-scan which monitors agglomeration and precipitation of nanoparticles in the ink for three days. The Turbi-scan results showed that the formulated Ni ink had been stable for 3 days without any indication of precipitation across the entire ink. Antireflection coating (ARC) layer in crystalline solar cell wafers was removed by laser ablation technique leading to the formation of 84 grooves where the Ni ink was printed by EHD continuous jet printing. The printability and microstructure of EHD-jet-printed Ni lines were investigated by using optical and electron microscopes. 84 Ni lines with the width less than $20{\mu}m$ were successfully printed by one-time printing without any misalignment and fill the laser-ablated ARC grooves.

• 한국인쇄학회지
• /
• 제31권1호
• /
• pp.15-37
• /
• 2013

Split digital printing into interior and outdoors on present advertisement. When is printing machine for interior mainly, use ink of water-based type. Equipment of this type embodies high resolution, but ink special quality light stability is weak. Also, when is printing machine for outdoors, printing machines of solvent or UV type are used because of water resistance and light stability. This printing machines hard to embody ink special quality high resolution mainly. And because outside is far visibility range, is uncommon in case high resolution requires embodiment. Therefore, high resolution of inside is water-based type considering this item and outside printing machine of low resolution solvent type mainly announce. Also, divide into eco-friendly latex ink type that is announced to water-based, solvent, UV according to ink type and the latest market using in occasion of digital printing machine used as advertisement industry. Color management that is been consistent of original image has a lot of difficulties by using substrate that is also various to digital printing machine for such various advertisement. But, consumers is rising realization about color or desire about quality improvement of color gradually in interior outside advertisement market. So, require solution method. Therefore, in this paper, eco-friendly ink use applied device calibration through linearization in done latex digital printing machine to basis. And studied right color management plan of digital printing for interior outside advertisement through three steps such as G7 calibration application and ICC profile application.

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.345-351
• /
• 2019

디지털 잉크젯 프린팅 기술은 고해상도, 빠른 인쇄 속도, 높은 잉크 효율과 같은 장점과 함께 다양한 소재 적용이 용이하여 반도체, 디스플레이, 세라믹 타일 등의 산업 분야에서 주목을 받고 있다. 최근에는 전통적인 잉크 소재에서 벗어나 우수한 내열성, 내광성, 내화학성 등을 보이는 기능성 소재도 잉크젯 프린팅 공정에 적용하려는 시도가 활발히 진행되고 있다. 특히 2차원 인쇄뿐만 아니라 3차원 적층인쇄에 관한 연구도 시작되고 있으며 이를 위해서는 토출되는 잉크의 유변학적 물성과 프린트되는 기판과의 상호작용를 제어하는 것이 필수적이다. 본 연구에서는 나노 실리카 입자가 포함된 광경화성 세라믹 잉크를 합성하고 잉크의 물성과 프린팅 기판의 표면특성을 제어하였다. 나노 실리카 입자가 포함된 광경화성 세라믹 잉크의 퍼짐현상을 억제하고 기판과의 접촉각 특성을 개선함으로써 결과적으로 프린팅 해상도 및 적층성을 향상시켰으며 잉크젯 프린팅을 이용한 광경화 나노 실리카 잉크의 3D 프린팅에 대한 가능성을 확인하였다.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.55-60
• /
• 2010

Ink transfer process from the printing roll to the moving web was investigated using a CFD technique for the application in R2R printed electronics. In line with the requirement that the web handling speed needs to be increased further for the cost competitiveness, the effects of web moving velocity with relatively complex roll patterns were analyzed. To make the present analysis more realistic, the numerical geometry and the ink properties were selected to match those of the real printing production system. Our numerical results showed that both web handling speed and complex printing-roll patterns influenced the shape of the transferred ink. As the web moving speed approaches towards 30mpm, a significant distortion of the shape of the transferred ink occurred. In the range of pattern width smaller than 100 microns, a phase distortion was also found to occur in all the printing-roll patterns considered in the present work but the ratio of the phase distortion to the line width gets smaller as the width becomes smaller. Thus, the web handling speed and the shape of printing-roll pattern will be important elements for the better printing quality under 100 micron line width range.

• 한국인쇄학회지
• /
• 제29권1호
• /
• pp.75-83
• /
• 2011

As screen printing is changed by automation recently, could print more exactly. However, must suffer great many trial and error to have still gotten perfect result. By the way, at this step, fair time and money should be invested. Therefore, if search for optimum condition in early time visualizing screen printing process using simulator program before progress printing, is judged that may be correct and gets printing result efficiently. In this paper, searched optimum printing speed and ink viscosity using FLOW-3D program. Also, the result could confirm truth that is agreeing almost with experiment contents. Through this, is thought that may expect extension of screen printing wide application that vivify advantage of screen print if use simulation program.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1806-1809
• /
• 2008

Study that form micro pattern by direct ink jet printing method is getting attention recently. Direct ink jet printing spout fine droplet including nano metal particle by force or air pressure. There is reason which ink jet printing method is profitable especially in a various micro-patterning technology. It can embody patterns directly without complex process such as mask manufacture or screen-printing for existent lithography. In this study, research of a technology that ejects fine droplet form of Pico liter and forms metal micro pattern was carried with inkjet head of piezoelectricity drive system. Droplet established pattern while ejecting consecutively and move on the surface at the fixed speed. Patterns formed in ink are mixed with organic solvent and polymer that act as binder. So added thermal hardening process after evaporate organic solvent at isothermal after printing. I executed high frequency special quality estimation of CPW transmission line to confirm electrical property of manufactured circuit board. We tried a large area printing to confirm application possibility of an ink jet technology.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.875-877
• /
• 2007

Zinc tin oxide (ZTO) sol-gel solution was synthesized for ink-jet printable semiconducting ink. Bottom-contact type TFT was produced by printing the ZTO layer between the source and drain electrodes. The transistor involving the ink-jet printed ZTO had the $mobility\;{\sim}\;0.01\;cm^2V^{-1}s^{-1}$. We demonstrated the direct-writing of semiconducting oxide for solution processed TFT fabrication.