• 대한방사선기술학회지:방사선기술과학
• /
• 제45권5호
• /
• pp.423-431
• /
• 2022

The purpose of this study is to present objective information in applying 3D printing technology for PET/CT (Positron Emission Tomography/Computed Tomography) performance evaluation and use it as a basic research that can be applied to various purposes in the future. Phantoms were manufactured with step wedge of ABS(Acrylonitrile Butadiene Styrene) and ACR(Acrylic acid) material. The counts for each ROI(Region of Interest) were analyzed through image acquisition in PET/CT. And the variation rate of counts and CNR(Contrast Noise Ratio) was evaluated. In the counts analysis, the effect of thickness occurred. In addition, in the variation rate analysis, the thickness setting of steps wedge 4 to 5 levels should be considered first. These results minimize quantitative and qualitative changes in the phantom manufactured based on 3D printing, and enable more stable PET/CT performance evaluation. Based on 3D printing in PET/CT, various phantoms are expected to be produced in the future. If the characteristics of each material are considered and applied through the basic research such as this research, the result of the phantom manufactured through 3D printing can be more meaningful and will be used in a wide range.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.467-470
• /
• 2007

Ultrafine Indium tin oxide (ITO) nanoparticle was successfully fabricated by low temperature synthetic method (LTSM). Mean size of ITO nanoparticle is 5 nm, and uniformly dispersed with (222) orientated cubic structure. Using the nanoparticle, ITO thin film with good optical and electrical properties was fabricated by inkjet printing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1071-1074
• /
• 2008

By carefully selecting the structure of dyes, especially the metal complex dyes, and studying the properties of the prototype display. It was found some dyes electrophoresis and display well. The dyes ink with good stability during electrophoresis when the electrode was protected. while the response time is about 300 ms.

• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.92-97
• /
• 2019

In this paper, we investigated the problems and solutions in the production of scaffolds using commercially available FDM 3D printers. We used ADRIGE TRIZ algorithm to systematically analyze the problems and suggest solutions. We printed scaffolds using suggested solutions. We measured the pore size and printing time of the scaffolds. We have confirmed that the printing precision is greater than 99% and the printing time is decreased by half. The suggested solutions proved its validity through experiments and showed satisfactory results.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.125-130
• /
• 2021

Scaffold is used to produce bio sensor. Scaffold is required high dimensional accuracy. 3D printer is used to manufacture scaffold. 3D printer can't detect defect during printing. Defect detection is very important in scaffold printing. Real-time defect detection is very necessary on industry. In this paper, we proposed the method for real-time scaffold defect detection. Real-time defect detection model is produced using CNN(Convolution Neural Network) algorithm. Performance of the proposed model has been verified through evaluation. Real-time defect detection system are manufactured on hardware. Experiments were conducted to detect scaffold defects in real-time. As result of verification, the defect detection system detected scaffold defect well in real-time.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.461-466
• /
• 2007

There has been a great interest in printing technology as a low cost and mass production method for the application of printed electronics such as printed TFT, solar cell, RFID Tag, printed battery, and so on. In this study, apparatuses of gravure-offset printing are developed for fine line-width/gap printing and examining pattern distortion occurred in gravure-offset printing process. The fine line-width/gap pattern shows that it is possible to make around 20 micro-meter line-width/gap printing patterns. Pattern distortion is modeled, and the amount and shape of the distortion are calculated by using commercial FEM code. The roll-to-roll printing system under development consists of unwinder/rewinder, two printing units, one coating unit, drying units, guiding unit, vision system, and other auxiliary devices. For multi-layer printing, the system is designed to be capable of printing two different materials.

• 펄프종이기술
• /
• 제38권4호
• /
• pp.41-46
• /
• 2006

Printed mottle of coated paper is one of the most common but the most difficult problem in offset printing. Printed mottle is caused by an uneven penetration of Ink into the paper, binder migration, etc. For a high quality printing, development of new paper coating technologies to prevent print mottle is required. So for, the study of solving printed mottle is coated paper absorption controlled by base paper sizing and coating layer binder migration control. As a results, printed mottle has improved in coated paper. But printing is worked by interaction of printing ink, coated paper and printing pressure, then we need to understand of interaction printing work and coated paper. This research focused on a way of improving printed mottle by investigating various printing conditions such as ink dispersion, nip condition and amount of ink transfer using IGT printability tester.

• 디지털융복합연구
• /
• 제17권4호
• /
• pp.309-317
• /
• 2019

본 연구는 3D 프린팅 기술에 대한 이론적 고찰과 이를 창의적으로 작품에 접목시킨 도자작품 사례분석을 통하여 3D 프린팅 기술이 도자작품의 조형성과, 예술적 가치에 미치는 영향을 재조명고자 하였다. 이에 작가 7인과 두 디자인팀의 도자작품 사례분석으로 다음과 같은 결론을 도출하였다. 첫째, 3D 프린팅 기술을 작품에 접목시킨 디지털제작은 기존의 수작업 방식과 달리 데이터 응용 및 변경이 가능하여 작가의 개성 있는 창작 예술품이 가능하다. 둘째, 새로운 소재와 방식, 첨단 디지털기술로 기존의 도자개념을 벗어난 보다 입체적이고 다채로운 조형물로 표현의 새로운 패러다임을 만들어 나가고 있었다. 앞으로 3D 프린팅에 대한 계속적인 연구와 활용으로 발전하는 디지털 기술에 부합하는 새로운 방법론을 찾아내고 실현하여, 미적 가치와 아름다움을 가진 도자디자인의 새로운 가치가 재창조되기를 기대해본다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.84.1-84.1
• /
• 2010

Currently, new and renewable energy come into the spotlight, such as solar energy, wind power, fuel cell, hybrid car etc., due to the energy resource is being depleted. Especially, in order to solve like this problem, the study of solar cell manufacturing systems are being extensively researched such as vacuum process. But the major fault of the vacuum process are its expensive production price. On the order hand, Roll-to-roll printing system, the new technology of solar cell manufacturing, has low production price compare with the vacuum process. Also roll-to-roll printing system can decrease the 95% of waste water and 99.9% of harmful gasses than the vacuum process. So we addressed the roll to roll printing system for the flexible solar cell by using printing technology. This roll-to-roll printing system is comprised of various modules, such as web handling module, fine pattern printing module, dry/curing module, uniform coating module and laminating module etc.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.408-414
• /
• 2012

Screen printing is a printing method that uses a woven mesh to support an ink-blocking stencil by transferring ink or other printable materials in order to form an image onto a substrate. Recently, the screen printing method has applied to micro-electronic packaging by using solder paste as a printable material. For the screen printing of solder paste, metal masks containing a number of micro-holes are used as a stencil material. The metal mask undergoes deformation when it is installed in the screen printing machine, which results in the deformation of micro-holes. In the present study, finite element (FE) analysis was performed to predict the amount of deformation of a metal mask. For an efficient calculation of the micro-holes of the metal mask, the sub-domain analysis method was applied to perform FE analyses connecting the global domain (the metal mask) and the local domain (micro-holes). The FE analyses were then performed to evaluate the effects of slot designs on the deformation characteristics, from which more uniform and adjustable deformation of the metal mask can be obtained.