• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.5
• /
• pp.450-455
• /
• 2007

LCD color filters have been manufactured in a process called photolithography to date, but various printing methods have been studied currently in response to the trend of low-end LCD panels. Direct Printing Process is a suitable fabrication technique to develope pigment components whose dimensions are in nano. The success of this process depends on the systematic preparation of pigment millbase. Conventional millbase dispersions are constituted of the organic pigments, monomer, dispersant and solvents. An experimental study on the rheology of millbase dispersions is presented. Subsequently, this thesis attempts to find out the dispersive characteristics as well as the selection of pigments, monomers and dispersants in the part of millbase among the stages of manufacturing LCD color filters using the direct printing methods. The dispersive characteristics were shown through analytic devices such as PSA, Rheometer, etc.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.4
• /
• pp.1-8
• /
• 2017

This paper concerns the possibility of 3D printing reverse idle gears for tractor transmission. For the purposes of this experiment, idle gears were manufactured using a SLA 3D printer, FDM 3D printer, and through machining. The accuracy of the idle gears produced in these three different ways were evaluated by the properties of their outer diameter, inner diameter, roundness, concentricity, parallelism, span, backlash, and gear grade. The tooth characteristics of the idle gears were evaluated by their profile, lead, and the pitch of the gears. The results of this experiment determined that the surface conditions created by the finishing process had a significant impact on the dimensional accuracy of the gears and the characteristics of their teeth.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.281-282
• /
• 2006

Tension control performance is very important in high-speed printing machine. One of the major factors that effect to tension control performance is the process of roll changing. Even if the turret arm moves during roll changing process and the span length of the unwinding system varies, it is customary to neglect it in motion and tension control and to consider it as a disturbance. In this paper, its effect is modeled nonlinearly and compared with linear model, and an effect of an infeeder dancer is analyzed under the condition with no unwinder dancer. We verify the performance of the proposed method via simulation in the high-speed printing machine.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1486-1489
• /
• 2009

Micro wall is fabricated using iterative screen printing that it is able to fabricate the pattern as low cost, simple process, formation of pattern at large area on the various substrates. In the process of micro wall fabrication using screen printing, the printing result with pressure change in process and improvement of surface roughness using hydrophillic plasma treatment are included. Height of micro wall increase linearly and precision of iteration is very high. Error rate of printed pattern width is very high, but change rate of width is under 10 %. Fabricated micro pattern have minimum width $48.75{\mu}m$ and maximum height $75.45{\mu}m$ with aspect ratio 1.55.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.21 no.2
• /
• pp.1-10
• /
• 2003

The Rheological properties are important factors in printing process. Specially, emulsification phenomenon is a very important factor that decides the quality of printing products in lithography. In this paper, I investigated the flow characteristics depending on calcium carbonate concentration for emulsified inks. By applying the data of this paper, I which to predict quality of printing product in practical printing process.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.3
• /
• pp.79-81
• /
• 2008

A single-wall carbon nanotube (SWNT) transparent conductive film (TCF) was fabricated using a simple inkjet printing method. The TCF could be selectively patterned by controlling the dot size to diameters as small as $34{\mu}m$. In this repeatable and scalable process, we achieved 71% film transmittance and a resistance of 900 ohm/sq sheet with an excellent uniformity, about ${\pm}5%$ deviation overall. Inkjet printing of SWNT is substrate friendly and the TCF is printed on a flexible substrate. This method of fabrication using direct printing permits mass production of TCF in a large area process, reducing processing steps and yielding low-cost TCF fabrications on a designated area using simple printing.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.1
• /
• pp.45-57
• /
• 2006

Offset lithography is the most widely used printing process in domestic printing industry, but there are no industry-wide specifications for press control to assure consistent quality across printing plants. As printing becomes more of a commodity and less of an art, it is necessary to develop a print quality specification standard suitable for Korea offset printing field. This study aims to contribute to improving the quality of domestic offset color prints by comparative study on color reproduction properties of 2 kinds of domestic process color ink composed of C(cyan), M(magenta), Y(yellow) and K(black) and of 3 kinds of domestic coated paper, using colorimetric color measurement method.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.2
• /
• pp.25-33
• /
• 2006

The reality of domestic prints neither possesses an objective standard of standard density nor a spectrophotometric method in regard to process ink. As a result, it creates a difficult communication between a designer and a Prepresser as to estimating the color of reproduction prints. There was an experiment on paper, ink, and printing company to obtain the standard point. The result shows that paper has minimum effect on color reproduction as opposed to ink and different printing companies, which had a great effect. The purpose of this paper is to confirm how different the color reproduction properties of prints are using densitometer and spectrophotometer for three different ink companies. The process color inks of three different companies were used under the same printing environment in this experiment.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.2
• /
• pp.77-92
• /
• 2005

Offset lithography is the most widely used printing process in domestic printing industry, but there are no industry-wide specifications for press control to assure consistent quality across printing plants. As printing becomes more of a commodity and less of an art, it is necessary to develop a print quality specification standard suitable for Korea offset printing field. This study aims to contribute to improving the quality of domestic offset color prints by comparative study on color reproduction properties of 3 kinds of domestic process color ink composed of C(cyan), M(magenta), Y(yellow), and K(black), and of 3 kinds of domestic coated paper, using densitometric color measurement method.

• Journal of Surface Science and Engineering
• /
• v.37 no.1
• /
• pp.22-27
• /
• 2004

Copper electroforming process has been applied to duplicate Koryo Tripitaka (Taejang'kyong), wooden printing block. Thin copper replica printing plates of 1 mm thickness was successfully manufactured from the printing face (54.5${\times}$25.5 cm) of wooden printing plate. Major processes are (1) silicon rubber replication of the master (2) silvering on silicon rubber (3) copper electroforming (4) separation of copper from the silicon mandrel (5) final coloring by brass plating and trimming. This process has various Potential applications in making thin metallic objects such as plaques, statues, bust and hollow metal objects for jewelry.