• 대한기계학회논문집B
• /
• 제30권11호
• /
• pp.1107-1116
• /
• 2006

The droplet ejection process driven by an evaporating bubble in a thermal inkjet printhead is investigated by numerically solving the conservation equations for mass, momentum and energy. The phase interfaces are tracked by a level set method which is modified to include the effect of phase change at the interface and extended for multiphase flows with irregular solid boundaries. The compressibility effect of a bubble is also included in the analysis to appropriately describe the bubble expansion behaviour associated with the high pressure caused by bubble nucleation. The whole process of bubble growth and collapse as well as droplet ejection during thermal inkjet printing is simulated without employing a simplified semi-empirical bubble growth model. Based on the numerical results, the jet breaking and droplet formation behaviour is observed to depend strongly on the bubble growth and collapse pattern. Also, the effects of liquid viscosity, surface tension and nozzle geometry are quantified from the calculated bubble growth rate and ink droplet ejection distance.

• 대한기계학회논문집B
• /
• 제31권1호
• /
• pp.51-61
• /
• 2007

This paper presents numerical and theoretical studies of acoustic wave interactions in slightly compressible liquids within piezoelectrically driven inkjet print heads. The interconnected flow channels may cause jet crosstalk, resulting in poor printing quality. It should be reduced by modifying the channel structure with the acoustic wave interactions considered. Compressible gas flow driven by the sudden movement of a top wall in the channel is calculated using Flow3D and is validated with the narrow gap theory. Limited compressibility model of the Flow3D is employed to calculate pressure waves of slightly compressible ink flow. It is found that reducing restrictor width can damp out the jet crosstalk by inhibiting the pressure wave propagation. The degree of crosstalk has been quantified using the maximum values of cross-correlations between neighboring channels and a critical channel dimension for acceptable crosstalk has been proposed. This finding is verified by drop visualization experiments using silicon-micromachined piezo inkjet print heads that are fabricated by our group.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1277-1278
• /
• 2008

Pentacene 박막 트랜지스터의 소스/드레인 전극을 폴리머인 Poly(3,4-ethylene dioxythiophene) poly(styrenesulfonate) (PEDOT:PSS)를 사용하여 잉크젯 프린팅 방법으로 제작하였다. 펜타신 박막 트랜지스터는 열 증착법을 사용하여 폴리며 기판위에 100nm의 두께로 증착하였다. 게이트 절연막은 $SiO_2$ 위에 Polymethly Methacrylate (PMMA)를 증착시킨 double layer를 사용하였다. PMMA 위에 증착시킨 pentacene 결정립이 $SiO_2$ 위에 증착한 pentacene 결정립 보다 크게 성장하였고, double layer의 절연막을 씀으로 인해 게이트 누설 전류가 감소함을 보였다. Pentacene 증착 온도에 따른 결정립 크기를 비교하여 가장 적절한 온도를 찾았다. 프린팅 방법을 사용하여 만든 박막 트랜지스터는 전계효과 이동도가 ${\mu}_{FET}=0.023cm^2/Vs$ 이고, 문턱이전 기울기 S.S=0.49V/dec, 문턱전압 $V_{th}=-18V$, $I_{on}/I_{off}$ 전류비 >$10^3$의 전기적 특성을 보였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.35-39
• /
• 2008

In this study, electromechanical properties of carbon nanotube (CNT) thin film on flexible substrates were measured using a micro-tensile machine with functionality of simultaneous measurements of displacement, load and electrical resistance. The CNT thin film of about 100 nm thick was deposited on flexible substrates, polyethylene terephthalate (PET) using spraying and ink-jetting techniques. To investigate the effect of process condition on the electromechanical properties of CNT thin film, sets of CNT samples were fabricated under various heat treatments and microwave process. The microstructures of the CNT thin film before and after tensile test were investigated using Scanning Electron Microscope (SEM), and the failure modes of the CNT thin films were identified to understand their electromechanical behaviors and interaction with the flexible substrates. Based on the experimental results, the use of CNT thin film as flexible electrodes and strain gages is discussed.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.663-667
• /
• 2003

The effects of paste materials on field emission properties in a carbon nanotube(CNT) cathode were investigated for high-efficient field emission displays. The major components in CNT paste for screen printing were a metallic Ag-paste, a dielectric glass-frit and CNT ink. The emission current from the cathode by an electron tunneling effect increased with an increase in the dielectric material fraction in the CNT paste, which is related to an increase of field enhancement factor in Fowler-Nordheim equation. The surface treatment used, after soft baking of the screen-printed CNT films, greatly affected the decrease in the turn-on field in CNT cathode and the uniformity of emission sites over the entire CNT film area.

• 대한물리의학회지
• /
• 제12권2호
• /
• pp.21-31
• /
• 2017

PURPOSE: The purpose of this study was to identify whether backward walking exercise was more effective than conventional physical therapy for balance and gait in hemiplegic stroke patients. METHODS: Eighteen patients with chronic stroke were randomly assigned to the experimental (n=9) or control (n=9) group. The experimental and control group performed backward walking exercise and conventional physical therapy, respectively, for 8 weeks. Stability Index (SI) and Weight Distribution Index (WDI) during standing were assessed using the Tetrax Balance System. The Timed Up and Go (TUG) test and Korean version of the Berg Balance Scale (K-BBS) were used to evaluate balance and fall risk. Walking speed, stride length, and step length on the affected side were measured using the 10-Meter Walk and ink foot printing tests. Wilcoxon signed-rank and Mann-Whitney U tests were used for within- and between- group comparisons, respectively. RESULTS: The experimental group showed significantly higher changes in SI (p<.01), WDI (p<.01), TUG (p<.001), and BBS score (p<.001) following intervention compared with the control group. The experimental group also showed significantly greater improvements in walking speed (p<.01), stride length (p<.001), and step length on the affected side (p<.001) after intervention compared with the control group. CONCLUSION: Backward walking exercise is an effective intervention to improve balance and gait in hemiplegic stroke patients.

• 디자인학연구
• /
• 제11권1호
• /
• pp.229-236
• /
• 1998

컴퓨터가 컬러 색 체계를 갖게됨에 따라 컴퓨터 그래픽스는 중요한 기술적 진보를 이루게 되었다. 그러나 컴퓨터에서 구현되는 색 체계는 컴퓨터 모니터 상에서 빛으로 존재하기 때문에 인쇄 잉크나 물감에 의한 기존의 색 체계와는 전혀 다른 구조로 되어 있다. 따라서 기존의 디자인 프로세스나 사진에서의 색 재현이나 호환성에 여러 문제가 제기되고 있다. 컴퓨터에 의해 디자인 프로세스가 통합되어 조절, 관리되는 현재의 디자인 시스템에서는 정확한 색의 재현과 관리는 매우 중요하다고 할 수 있다. 본 연구는 기존의 색 체계의 역할과 그 기능을 고찰하고, 컴퓨터 그래픽스에 있어 컴퓨터 색 체계의 특성을 전통적인 색 체계와 비교, 분석하여 컴퓨터의 기술적인 표현이 가져다주는 조형적 특성을 고찰함으로써 컴퓨터를 이용한 재현과 디자인 프로세스의 새로운 가능성을 탐구하는데 그 목적이 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.427-427
• /
• 2013

잉크젯 프린팅 방법은 전도성 고분자 물질을 잉크 재료로 사용하여 전자 소자의 전극 패턴을 형성할 수 있으며 비접촉, drop-on-demand 공정으로 현재 많은 관심을 받고 있는 연구 분야이다. Ag는 $1.59{\mu}m{\cdot}cm$의 저항을 나타내는 가장 낮은 저항을 가지고 있는 물질 중의 하나이며, Ag 전도성 잉크는 고전도 패턴의 형성을 위해 현재 많이 사용되고 있는 물질이다. 본 연구에서는 a-IGZO 박막을 채널층으로 사용하여 Ag S/D 전극을 잉크젯 프린팅 방법으로 형성하여 산화물 트랜지스터를 제작하였다. a-IGZO 채널층은 $SiO_2$가 증착된 Si 기판위에 스퍼터링 방식으로 80 nm의 두께로 형성하였다. Ag S/D 전극은 10 pl의 카트리지가 장착된 Fujifilm Dimatix DMP 2800 장비를 사용하여 형성하였으며, 프린팅 후 $130^{\circ}C$로 20분간 열처리를 하였다. Fig. 1은 잉크젯 프린팅된 Ag S/D을 가진 a-IGZO의 트랜지스터 특성을 보여준다. 채널 W/L가 90/$50{\mu}m$ 구간에서 드레인 전압이 50 V 일때, 전계효과이동도 $0.27cm^2$/Vs, 문턱전압 6.03 V, 문턱전압 아래의 기울기 값은 2.06 V/dec를 얻었다. 이와 같은 특성은 잉크젯 프린팅 방법으로 Ag S/D 전극을 형성함으로써 산화물 TFT에서 잉크젯 프린팅 방식의 다양한 응용 가능성을 확인할 수 있었다.

• 한국인쇄학회지
• /
• 제23권2호
• /
• pp.1-14
• /
• 2005

Generally, printing inks are composed of pigment, vehicle and additive. Among others, the vehicle transfers the pigment to substrate and then binds it on the surface. So, rheological properties of the vehicle are an important factor which has influence on printability. Thus, in this study, rheology of the vehicle was investigated by using rotational rheometer according to molecular weight of resin. Also, emlusion rheology of water in oil type and its microstructure were examined with increasing the shear rate. Consequently, the following results were obtained: (1) By viscometric flow test, zero shear viscosity and shear thinning index of vehicle increased with increasing the molecular weight of resin. (2) By relaxation and creep test, relaxation time and retardation time of vehicle increased with increasing the molecular weight of resin. (3) By frequency sweep test, crossover point of vehicle increased with increasing the molecular weight of resin. (4) G' and G" of emlusions increased with increasing the molecular weight by amplitude sweep test. (5) The shape of water drop in emlusions was changed to the capillary tube.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.36.2-36.2
• /
• 2009

In this work, the high power CW Nd:YAG laser has been used for thermal treatment of inkjet printed Ag films-involving eliminating organic additives (dispersant, binder, and organic solvent) of Ag ink and annealing Ag nanoparticles. By optimizing laser parameters, such as laser power and defocusing value, the laser energy can totally be converted to heat energy, which is used to thermal treatment of inkjet printed Ag films. This results in controlling the microstructures and the resistivity of films. We investigated the thermal diffusion mechanisms during laser annealing and the resulting microstructures. The impact of high power laser annealing on microstructures and electrical characteristic of inkjet printed Ag films is compared to those of the films annealed by a conventional furnace annealing. Focused ion beam (FIB) channeling image shows that the laser annealed Ag films have large columnar grains and dense structure (void free), while furnace annealed films have tiny grains and exhibit void formation. Due to these microstructural characteristics of laser annealed films, it has better electrical property (low resistivity) compared to furnace annealed samples.