• 한국염색가공학회지
• /
• 제30권3호
• /
• pp.168-179
• /
• 2018

The modified surface of specialty carbon black(SCB) is one of the main technical factors for producing a uniform color and stable dispersion. In this work, the carboxylation or sulfonation process of SCB was used to improve the dispersive properties of hydrophilic solvents such as 1,6-hexanediol and propylene glycol monomethyl ether acetate(PGMEA). The results showed that the color strength of SCB DC2500G changed little with a range of 0.128~0.941(${\Delta}E$) compared to other SCB DC2500G material. In contrast, in the case of SCB EG410, there was a uniform color value with a range of 0.144~0.252(${\Delta}E$). Also, in our experiments, a modified SCB was confirmed by printing ink material as a melt coating paper. It may be possible that the SCB EG410 material can be advantageous as a gravure ink product. Finally, the modified SCB obtained from this research will have a large impact on the industry as a potential material for toners, paint, rubber, fillers, and other carbon black additives.

• 복식
• /
• 제60권10호
• /
• pp.100-117
• /
• 2010

This thesis has three main purposes: first, will show kinds, patterns, types, expression techniques of modern korean women's trimmings by every ten years. Second, it is to trace the effect of each decade on women's Hanbok trimming designs. Third, it will point out factors. that caused the change of modern Korean women's Hanbok trimming design patterns. Henceforth, there comes the result of the research and analysis. Trimming design patterns of modern women's Hanbok can be divided into three categories temporally: The first period of from 1910s to the first half of 1950s saw that design patterns did not changed much from traditional ones. It is because there were many catastrophes such as the invasion of Japanese Empire and Korean War. The compound design had expressed people's wish to earn many sons and babies at the end of Joseon Dynasty. But it turned to wishing luck for individuals affected by individualism and liberalism imported from the west. Realistic designs are the most frequently used and the least lines made up patterns. The second period of from the latter half of 1950s to 1970s saw that women wore their Jeogories and Chimas as suits. Screen printing technique enabled for various design patterns to come out. And the development of textile industry introduced various expression techniques such as making lace, meshing, flocking, burn-out etc cetera. The third period of 1980s saw that Hanbok became a kind of luxurious clothe as people's living standard rose. Hanbok again came into the spotlight, Hanbok designers came forward and their individualities are respected. The characteristic expression technique of grey-dying and geometric design patterns are more frequently used for the simple and modern beauty.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권3호
• /
• pp.223-229
• /
• 2019

In order to reduce the radiation exposure dose of the patient and to obtain accurate diagnosis results, the quality control of the diagnostic radiation generator must be conducted periodically In particular, bone density test equipment could be influenced by many factors, and it is far more important because inaccurate measurement would eventually affect the result value. However, the cross-correction phantom of DXA equipment is poorly penetrated due to lack of awareness of the industry and the high cost. Therefore, this study developed a BMD phantom using a 3D printer and Korean BMD phantom with low cost by cross analyzing Korean BMD value from The Korean National Health and Nutrition Examination Survey and evaluated it. The L1, L2, and L3 BMD values of phantoms produced with the 3D printer were measured to be $0.887{\pm}0.006g/cm^2$, $0.927{\pm}0.006g/cm^2$, and $0.960{\pm}0.005g/cm^2$, at 215 mm height and $0.882{\pm}0.011g/cm^2$, $0.914{\pm}0.005g/cm^2$, $0.933{\pm}0.008g/cm^2$ at 155 mm height displaying statistically significant relevance. The result suggests that a proper quality control and cross calibration of DXA device be possible and expected to be an essential data for various medical phantom manufacture development using 3D printer.

• 한국기계가공학회지
• /
• 제18권3호
• /
• pp.33-40
• /
• 2019

FDM 3D printers have become widespread, and investment in the 3D printer industry is increasing. Therefore, many 3D printers are released and the functions of products are emphasized. However, to lower unit prices, open-type 3D printers are sold in kit form, and their performance is very low. If the 3D printer has many heat sources and is sealed, there is the possibility that the main accessories (the main board, power supply, and motor) will be damaged by trapped heat. At the same time, if the ambient temperature is low due to the properties of the material, the output quality deteriorates. In this study, we analyzed the temperature rise of the main accessories and the quality of the output by the heat bed when a chamber was added to an open-type 3D printer. We also compared the quality of the output due to the air flow with the temperature rise of the main accessories. Moreover, we found the optimal value. As a result of the quality analysis, it was finally confirmed that the case with the chamber at $95^{\circ}C$ was the best for the printing condition. In addition, in the absence of the chamber, the bending of the specimen was found to be large, and in the case of the chamber, the degree of bending was slightly decreased by 0.05 mm.

• 한국분말재료학회지
• /
• 제27권6호
• /
• pp.509-519
• /
• 2020

A well-established characterization method is required in powder bed fusion (PBF) metal additive manufacturing, where metal powder is used. The characterization methods from the traditional powder metallurgy process are still being used. However, it is necessary to develop advanced methods of property evaluation with the advances in additive manufacturing technology. In this article, the characterization methods of powders for metal PBF are reviewed, and the recent research trends are introduced. Standardization status and specifications for metal powder for the PBF process which published by the ISO, ASTM, and MPIF are also covered. The establishment of powder characterization methods are expected to contribute to the metal powder industry and the advancement of additive manufacturing technology through the creation of related databases.

• 한국의류산업학회지
• /
• 제24권3호
• /
• pp.333-345
• /
• 2022

This study developed and evaluated the motion control of 3D printed fingers applied to smart gloves. Four motions were programmed by assembling the module using the Arduino program: cylindrical grasping, spherical grasping, tip-to-tip pinch gripping, and three-jaw pinch gripping. Cap and re-entrant (RE) strip types were designed to model the finger. Two types of modeling were printed using filaments of thermoplastic elastomer (TPE) and thermoplastic polyurethane (TPU). The prepared samples were evaluated using three types of pens for cylidrical grasping, three types of balls for spherical grasping, and two types of cards for tip-to-tip pinch gripping and three-jaw pinch gripping. The motion control of fingers was connected using five servo motors to the number of each control board. Cylindrical and spherical grasping were moved by controlling the fingers at 180° and 150°, respectively. Pinch gripping was controlled using a tip-to-tip pinch motion controlled by the thumb at 30° and index-middle at 0° besides a three-jaw pinch motion controlled by the thumb-index finger-middle at 30°, 0°, and 0°, respectively. As a result of the functional evaluation, the TPE of 3D-printed fingers was more flexible than those of TPU. RE strip type of 3D-printed fingers was more suitable for the motion control of fingers than the 3D-printed finger.

• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.705-709
• /
• 2022

Poly(vinylidene fluoride-trifluoroethylene)(P(VDF-TrFE)) 고체 전해질 층의 어닐링 온도가 고분자 멤리스터의 전기적 특성에 미치는 영향을 분석하였다. 형태적 분석에서 100℃ 어닐링 온도를 갖는 P(VDF-TrFE) (100P(VDF-TrFE)) 박막 대비 200℃ 어닐링 온도를 갖는 P(VDF-TrFE) (200P(VDF-TrFE)) 박막의 표면 거칠기가 약 5배 크고 두께는 약 20% 작은 것으로 나타났다. 100P(VDF-TrFE)를 갖는 멤리스터 (M100) 대비 200P(VDF-TrFE) 멤리스터 (M200)의 set voltage는 약 50% 감소하였고, reset voltage의 크기는 약 30% 증가하였다. 또한, M200이 M100보다 더 나은 메모리 유지 특성을 갖는 것으로 나타났다. 이러한 차이는 M100 대비 M200 내부의 강한 국소 전기장 때문인 것으로 판단된다. 본 연구는 고분자 멤리스터의 어닐링 온도의 중요성을 제시함에 의의가 있다.

• 전기전자학회논문지
• /
• 제27권1호
• /
• pp.25-29
• /
• 2023

폴리실라잔 고체 전해질 층과 은(Ag) 활성 전극의 공정이 멤리스터의 전기적 특성에 미치는 영향을 살펴보았다. 더 높은 온도에서 어닐링된 고체 전해질을 갖는 멤리스터가 더 낮은 온도에서 어닐링된 고체 전해질을 갖는 소자보다 더 높은 set voltage 및 더 나은 메모리 유지 특성을 보였다. 어닐링 온도 증가에 따른 set voltage의 증가 및 메모리 유지 특성의 향상은 각각 고체 전해질 층 내부의 빈 공간의 감소 및 균일도 증가 때문인 것으로 사료된다. 고체 전해질 층을 비교적 높은 온도에서 어닐링 할지라도, 폴리실라잔 용액의 농도가 지나치게 높은 경우에는 멤리스터의 저저항상태가 유지되지 못했다. 마지막으로, 용액공정으로 형성한 Ag 활성 전극을 갖는 멤리스터는 진공공정으로 형성한 Ag 활성 전극을 갖는 소자와 달리 WORM 특성을 갖는 것으로 나타났다. 이러한 WROM 특성은 용액공정 Ag 활성 전극에 존재하는 형태적 결함 때문인 것으로 사료된다.

• 공업화학
• /
• 제35권1호
• /
• pp.61-65
• /
• 2024

대면적 유기 발광 다이오드, 유기 태양 전지, 박막 트렌지스터의 정공 주입층으로써 CuSCN의 효과가 많이 입증되었다. 따라서 본 연구에서는 용액 공정 조건에 따라 CuSCN의 표면과 광학적, 전기적 분석을 하여 최적화된 필름의 조건을 제시하였다. 다양한 CuSCN 용액의 농도를 제작하여 필름 표면 특성을 확인하였고, 필름의 표면이 소자의 전기적 성능에 영향을 미치는지 확인하였다. CuSCN의 용액의 농도가 낮을 때는 CuSCN의 필름이 형성되지 않고 island 형태로 코팅되었고, 용액의 농도가 증가할수록 CuSCN의 필름이 균일하게 형성하였고 이는 소자의 전도도 향상에 기여하였다. 또한 hole only device를 제작하여 CuSCN의 정공 수송 층으로써의 역할을 입증하였다.

• 조형예술학연구
• /
• 제6권
• /
• pp.249-266
• /
• 2004

Nowadays more than 200 countries are living on the earth in international relation. Having their own culture and history, these countries constitute international society, creating their national image with their own identity based on the culture and history. Though each country has cultural goods in which it combines its culture and history to economic area, the global and cultural goods representing a country is not made in short term, but completed by the combination of its long tradition, cultural consciousness of the nation and artistic level. That is to say, the image developed by the country is naturally embodied in the goods and the world recognizes the image and confirms the goods. To embody such Korean and global goods, it is essential to put priority on the research of history and culture of our society. Needless to say, it is very important to find the value of our own differentiated beauty and apply it to each area of design industry. Recognizing the differentiated value of our own cultural originality, this research performs the design of scarf and necktie to exhibit Korean image in modern and fashionable ways for commercialization by developing design of fashion and cultural goods to which Korean image is applied. Through literature and various informations, the theme of design that can best convey Korean image is determined to be the national flag of Korea, Taegeukki and five cardinal colors and the researching method is as follows. First, though the area of developing designs of cultural goods is very wide and various including commerce, industry, products , fashion, handicraft and traditional handicraft, etc., this research sets the scope of developing design, focusing on the fashion accessories utilizing the textile design such as costume, scarf, necktie and so on. Second, the definition and scope of cultural goods and the present situation of domestic cultural goods will be examined. Third, the modelling property and symbolic meaning of the national flag of Korea (Taegeultki) and five cardinal colors, the theme of design will be studied. Fourth, on the basis of above research, scarf and necktie will be designed by modern and fashionable design to which Korean image is applied. Fifth, this is textured in textile printing and gradation for commercialization.