Browse > Article
http://dx.doi.org/10.5764/TCF.2018.30.3.168

The Evaluation of the Preparation and Characterization of Inks based on Surface-modified Specialty Carbon Black(SCB)  

Park, Dong Jun (Green Chemistry Process Research Division, Interface Chemical Materials and Process Research Centre, Research Institute of Chemical Technology)
Kim, Song Hui (Green Chemistry Process Research Division, Interface Chemical Materials and Process Research Centre, Research Institute of Chemical Technology)
Park, Soo Youl (Green Chemistry Process Research Division, Interface Chemical Materials and Process Research Centre, Research Institute of Chemical Technology)
Publication Information
Textile Coloration and Finishing / v.30, no.3, 2018 , pp. 168-179 More about this Journal
Abstract
The modified surface of specialty carbon black(SCB) is one of the main technical factors for producing a uniform color and stable dispersion. In this work, the carboxylation or sulfonation process of SCB was used to improve the dispersive properties of hydrophilic solvents such as 1,6-hexanediol and propylene glycol monomethyl ether acetate(PGMEA). The results showed that the color strength of SCB DC2500G changed little with a range of 0.128~0.941(${\Delta}E$) compared to other SCB DC2500G material. In contrast, in the case of SCB EG410, there was a uniform color value with a range of 0.144~0.252(${\Delta}E$). Also, in our experiments, a modified SCB was confirmed by printing ink material as a melt coating paper. It may be possible that the SCB EG410 material can be advantageous as a gravure ink product. Finally, the modified SCB obtained from this research will have a large impact on the industry as a potential material for toners, paint, rubber, fillers, and other carbon black additives.
Keywords
specialty carbon black; surface modification; degree of blackness; dispersibility of the ink; alkyd resin; carboxylation and sulfonation;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 M. Y. Lee, K. E. Bae, S. H. Kim, S. C. Lim, and S. Y. Nam, Effect of Dispersant Contents on the Dispersity of Conductive Carbon-black and Properties of Screen-printed Source-drain Electrodes for OTFTs, Polymer (Korea), 33(5), 397(2009).
2 S. W. Song, E. H. Min, D. W. Lee,J. S. Kim, and W. T. Oh, Structural and Thermal Characteristics of Graphites Treated in Acidic Solutions, Korean J. Mater. Res., 27(2), 113(2017).   DOI
3 G. W. Lee, J. S. Kim, J. H. Yoon, J. S. Bae, B. C. Shin, I. S. Kim, and W. T. Oh, Structural Characterization of Carboxylated Multi-walled Carbon Nanotubes, Advanced Materials, 8(12), 1012(1996).   DOI
4 G. Y. Park, J. S. Kim, and Y. J. Jeong, Comparison of Characteristics of Multi-walledCarbon Nanotubes Functionalized using Various Methods, Textile Science and Engineering, 45(6), 359(2008).
5 H. K. Han, J. W. Lee, D. W. Park, and S. E. Shim, Surface Modification of Carbon Black by Oleic Acid for Miniemulsion Polymerization of Styrene, Macromol. Res., 18(5), 435(2010).   DOI
6 H. S. Jang, J. H. Hong, J. W. Lee, and S. E. Shim, Microencapsulation of Surface-modified Carbon Black by Miniemulsion Polymerization, Korean Chem. Eng. Res., 46(4), 669(2008).
7 C. U. Pittman, G. R. He, B. Wu, and S. D. Gardner, Chemical Modification of Carbon Fiber Surfaces by Nitric Acid Oxidation Followed by Reaction with Tetraethylenepentamine, Carbon, 35(3), 317(1997).   DOI
8 K. Kamegawa, K. Nishikuba, M. Kodama, Y. Adachi, and H. Yoshida, Oxidative Degradation of Carbon Blacks with Nitric Acid II, Formulation of Water-soluble Polynuclear Aromatic Compounds, Carbon, 40, 1447(2002).   DOI
9 F. Trotta, E. Drioli, G. Moraglio, and E. B. Poma, Sulfonation of Polyetheretherketone by Chlorosulfuric Acid, J. of Applied Polymer Science, 70(3), 477(1998).   DOI
10 K. S. Nam, S. M. Yoon, S. H. Lee, D. S. Kim, and C. H. Kim, Effect of Properties of Conductive Ink on Printability of Electrode Patterning by Gravure Printing Method, J. Korean Society Precision Engineering, 30(6), 573(2013).   DOI
11 Y.B. Ha, S. S. Oh, and W.J. Lee, The Study of the Printability on the Phenol Free Heat-set Web Inks(III), J. of Korea TAPPI, 44(4), 77(2012).
12 C. E. Hong,J. H. Lee, P. Kalappa, and S. G. Advani, Effects of Oxidative Conditions on Properties of Multi-walled Carbon Nanotubesin Polymer Nanocomposites, Compos. Sci. Technol., 67, 1027(2007).   DOI
13 R. Guan, H. Zou, D. Lu,C. Gong, and Y. Liu, Polyethersulfone Sulfonated by Chlorosulfonic Acid and its Membrane Characteristics, European Polymer J., 41, 1554 (2005).   DOI
14 C. K. Kim, G. J. Lee, and C. K. Rhee, Deaggregation and Ultradispersion of Detonation Nanodiamonds in Polar Solvent using Physicochemical Treatments, J. of Korean Powder Metallurgy Institute, 20(6), 469(2013).
15 M. L. Sham and J. K. Kim, Surface Functionalities of Multi-wall Carbon Nanotubes after UV/ozone and TETA Treatments, Carbon, 44, 768(2006).   DOI
16 G. W. Lee, J. S. Kim, J. H. Yoon, J. S. Bae, B. C. Shin, I. S. Kim, W. Oh, and M. Ree, Structural Characterization of Carboxylated Multi-walled Carbon Nanotubes, Thin Solid Films, 516, 5781(2008).   DOI
17 C.C. Lin,C.B.Chang, and Y. Z.Wang, Preparation and Properties ofCross-linked Sulfonated Poly(imide-siloxane) for Polymer Electrolyte Fuel Cell Application, J. of Power Sources, 223(1), 277(2013).   DOI
18 C. K. Chung, M. H. Lee, and E. K. Choe, Characterization Cotton Fabric Scouring by FT-IR ATR Spectroscopy, Carbonhydrate Polymers, 58(4), 417(2004).   DOI
19 A. G. Osorio, I. C. L. Silveira, V. L. Bueno, and C. P. Bergmann, $H_2SO_4/HNO_3/HCl$-Functionalization and its Effect on Dispersion of Carbon Nanotubes in Aqueous Media, Applied Surface Science, 255(5), 2485(2008).   DOI
20 H. Zhang, W. P. Low, and H. K. Lee, Evaluation of Sulfonated Graphene Sheets as Sorbent for Micro-solid-phase Extraction Combined with Gas Chromatography-mass Spectrometry, J. of Chromatography A, 1233(13), 16(2012).   DOI
21 K. J. Lee, B. S. Seo, J. S. Yang, B. Y. Seong, and D. H. Park, Thermal Properties of Semi-conductive Composites for DC Power Cable, J. of the Korean Institute of Electrical and Electronic Materials Engineers, 26(1), 49(2013).   DOI
22 S. H. Kang and S. W. Hong, Recent Progress in Flexible/Wearable Electronics, J. of Welding and Joining, 32(3), 34(2014).   DOI
23 J. Y. Park and J. S. Park, The Present Status and Future Aspects ofthe Marketfor Printed Electronics, J. of Korea Institute of Information and Communication Engineering, 17(2), 263(2013).   DOI
24 E. H. Lee and D. S. Kim, Effects of Surface-modification of Carbon Black on the Characteristics of Polymerized Toner, Korean Chem. Eng. Res., 51(5), 628(2013).   DOI
25 K. Y. Kim, H. Y. Rhyoo, S. J. Cho, K. E. Yoon, and S. I. Yang, Oxidation and Surface Functional Group Analyses under Ozone Treatment of Carbon Black, Elastomer and Composites, 40(3), 188(2005).
26 Ministry of Knowledge Economy, "Report C", Ministry of Knowledge Economy, Sejong, 2012.
27 J. M. Lee, S. R. Ryu, and D. J. Lee, Electrical and Mechanical Properties of Carbon Particle Reinforced Rubberfor Electro-active Polymer Electrode, Trans. Korean Soc. Mech. Eng. A, 37(12), 1465(2013).   DOI
28 J. M. Lee, S. R. Ryu, D.J. Lee, and Z.J. Lin, An Experimental Study for Electro-active Polymer Electrode and Actuator, Composites Research, 26(5), 289(2013).   DOI
29 M. S. Park, Suspension Polymerization with Hydrophobic Silica as a Stabilizer II, Preparation of Polystyrene Composite Particles Containing Carbon Black, Polymer(Korea), 30(6), 505(2006).
30 J. C. Yang, M. J. Jablonsky, and J. W. Mays, NMR and FT-IR Studies of Sulfonated Styrene-based Homopolymers and Copolymers, Polymer, 43(19), 5125(2002).   DOI
31 S. J. Park, J. S. Hwang, W. K. Choi, H. K. Lee, and K. M. Huh, Enhanced Hydrophilicity of Polyethersulfone Membrane by Various Surface Modification Methods, Polymer(Korea), 38(2), 205(2014).
32 G. Zhang, S. Sun, D. Yang,J. P. Dodelet, and E. Sacher, The Surface Analytical Characterization of Carbon Fibers Functionalized by $H_2SO_4/HNO_3$ Treatment, Carbon, 46(2), 196(2008).   DOI
33 M. M. Nasef and H. Saidi, Surface Studies of Radiation Grafted Sulfonic Acid Membranes: XPS and SEM Analysis, Applied Surface Science, 252(8), 3073(2006).   DOI
34 G. Jung, C. W. Nah, M. K. Seo, J. H. Byun, J. H. Lee, and S.J. Park, Influence of Acid and Base Surface Treatment of Multi-walled Carbon Nanotubes on Mechanical Interfacial Properties of Carbon Fibers-reinforced Composites, Polymer(Korea), 36(5), 612(2012).
35 A. Jung, R. Graupner, L. Ley, and A. Hirsch, Quantitative Determination of Oxidative Defects on Single Walled Carbon Nanotubes, Physica Status Solidi(b), 243(13), 3217(2006).   DOI
36 S. J. Park, J. S. Shin, and J. Kawasaki, Ammonia Removal of Activated Carbons Treated by Anodic Oxidation, J. of the Korean Industrial and Engineering Chemistry, 14(4), 418(2003).
37 G. W. Lee, J. S. Kim, J. H. Yoon, J. S. Bae, B. C. Shin, I. S. Kim, W. Oh, and M. Ree, Structural Characterization of Carboxylated Multi-walled Carbon Nanotubes, Thin Solid Films, 516, 5781(2008).   DOI
38 Y.B. Ha, S. S. Oh, andW.J. Lee, The Study of the Printability on the Phenol Free Heat-set Web Inks(II), J. of Korea TAPPI, 44(3), 41(2012).
39 Y. B. Ha, Y. K. Lee, C. K. Kim, S. S. Oh, and J. H. Lim, The Study of Printed Mottle on Properties of Coated Paper and Ink Dispersion(I), J. of Korea TAPPI, 38(4), 47(2006).