• Journal of Korean Library and Information Science Society
• /
• v.27
• /
• pp.27-59
• /
• 1997

The primary purpose of this study is to compare a specific characteristic of Ulhacha -printed books with Imitating Ulhacha-printed books to distinguish from each others. Ulhacha was made in the first year of King Secho (1455) used before Hideyoshi's Invasion of Korea in 1592, there are many kinds books printed with it. For this reason, Ulhacha used to printed books for long period, the letters were worn down and must be filled up with su n.0, pplementary letters during the reign of King Chungchong and Myungchong. And at the early times of King Suncho, Many letters were su n.0, pplement and printed many kinds of books very neatly. Ulhacha-printed books were classified four sorts of books according to its characteristic to examine closely. From the latter half of the 16th century, the beginning of King Suncho, what is called Imitating Ulhacha-printed book, many copies of book were printed off imitated with Ulhacha. Imitating Ulhacha-printed books also classified four kinds of books according to its characteristic. Being glance at imitated letters, they were similar to Ulhacha and confused one thing with another. To distinguish Ulhacha-printed books from imitated letter ones, it is important to discriminate each others. Generally speaking, imitating Ulhacha letters were resemblant Ulhacha closely, it is not easy to distinguish Ulhascha from imitated letter. But they have a tendency to exhibit more thin style than Ulhacha and different from its size. Out of Ulhacha-printed books, the big letters in Hunsa printed in the 7th years of reign of King Secho and Hangulcha in Kumgang panya paramil kyong samgahae printed in the 13th years of the reign of King Sung chong come in to question. Nevertheless the big letters in Hunsa is consider to be that of Ulhacha and Hangucha in Kumgang panya paramil kyong samgahae also to be Ulhacha mixed with Hang lcha, disagreement of opinions has been opted to give rise to problem. In order to verify such a problem, it is more convenient to use OHP film copied those letters than the naked eyes. As a result of collating with OHP film, the problem was proven to be above-mentioned.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.11
• /
• pp.981-986
• /
• 2014

Printed electronics devices are made of several sets of printed patterns. The quality or printability of the printed patterns determines the electrical performance of such devices. Moreover, control of the printability determines the reliability of such devices. Despite its importance, few studies have been reported for the measurement of the printed patterns to evaluate their printability. In this study, a measurement method is proposed for printed patterns, including the definition of the properties to be measured, and the related software is described. The proposed method measures the width, pinholes, and edge waviness and evaluates the printability of the patterns quantitatively. The proposed measurement method could be an efficient tool to evaluate and enhance the printability of printed patterns in printed electronics.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.287-294
• /
• 2013

The roll-to-roll (R2R) printed electronics system is one of the most promising technologies for the printed electronics industry because of several advantages in terms of productivity and cost. In the R2R printed electronics system, the characteristics of the printed patterns are an important issue that determines the functional quality of the printed matter. This study analyzed how several main factors may affect the characteristics of printed patterns, especially the thickness and surface roughness. The statistical model for estimation of the printed pattern was developed as a function of the main factors using the design of experiment (DOE) methodology. Based on the statistical analysis results, the R2R printed electronics system can be designed to control the characteristics of printed patterns.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.8 s.197
• /
• pp.74-80
• /
• 2007

The distortion of printed pattern is frequently observed in gravure offset printing process, which can be a serious problem in printing process for printed electronics. The mechanism of pattern distortion is studied and the factors which affect the amount and shape of distortion are found using FEM. The amount and shape of distortion is influenced by material properties of the roller, thickness of roller, applied load, and so on. As the printing pressure increases and Possion ratio increases, the degree of the image distortion increases. And the increase of the thickness of rubber roller brings a large distortion of image, too. In some cases, the distortion of printed pattern can reach a few hundred micromillimeters. The comparison of the experiment result and the simulation result shows good agreement in their quantitative tendency.

• Journal of Korean Library and Information Science Society
• /
• v.41 no.3
• /
• pp.205-224
• /
• 2010

The purpose of this study aims to present the base for the rational management of printed music as an important primary source of music materials. In this study, therefore, the selection and acquisition, organization, user services for the management of printed music are investigated. Then the present situation for management of printed music of university libraries in Daejeon and Chungnam are surveyed. Finally, the special issues to be considered in the management of printed music are presented.

• Journal of Periodontal and Implant Science
• /
• v.52 no.4
• /
• pp.338-350
• /
• 2022

Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.3
• /
• pp.129-143
• /
• 2006

This study is to review the printed cotton textile industry of Europe in 17th-l8th century, and specially investigate the development of the Toile do Jouy, printed French fabrics around the 18th century. Generally, the Toile de Jouy has two different meanings. The first meaning is the popular printed cotton textiles producted by wood block printing, copper plate printing and roller printing techniques at Jouy on Joas factory in France, around 18th century. The second meaning is the monochromatic upholstery fabrics printed by copper plate. Actually, this monochromatic printed textiles were the most popular printed cotton fabrics with large scale scenic designs with people, trees, birds, buildings, mythical heroes, protagonists of novel and country scenes of shepherds, sheep and other animals manufactured by Jouy on Joas factory. Main issue of this paper is to propose features of pattern, color and classify types of patterns expressed on the Toile de Jouy fabrics according to printing techniques such as wood block printing, copper plate printing and copper roller printing. And this study is also to analyze on origins of the variety of names called the printed cotton textiles in those days. The results of this study can help to understand the knowledge of printed cotton textiles in Europe and be effectively applied to develop printed fabric design in the textile industry.

• Journal of Korean Library and Information Science Society
• /
• v.40 no.1
• /
• pp.275-296
• /
• 2009

The purpose of this study is to investigate bibliographic control of printed music that is especially far-off the bibliographic control activities. In this study, therefore, the production and distribution channels of printed music and their publication situation are investigated. Then the development of bibliographic control of printed music is examined. And also, domestic, foreign, and international bibliographic control activities of printed music are analyzed. Finally, the special issues to be considered in our bibliographic control of printed music are presented.

• The korean journal of orthodontics
• /
• v.52 no.1
• /
• pp.20-28
• /
• 2022

Objective: Although, digital models have recently been used in orthodontic clinics, physical models are still needed for a multitude of reasons. The purpose of this study was to assess whether the printed models can replace the plaster models by evaluating their accuracy in reproducing intermaxillary relationships and by appraising the clinicians' ability to measure the printed models. Methods: Twenty sets of patients' plaster models with well-established occlusal relationships were selected. Models were scanned using an intraoral scanner (Trios 3, 3Shape Dental System) by a single operator. Printed models were made with ZMD-1000B light-curing resin using the stereolithography method 3-dimensional printer. Validity, reliability, and reproducibility were evaluated using measurements obtained by three operators. Results: In evaluation of validity, all items showed no significant differences between measurements taken from plaster and printed models. In evaluation for reliability, significant differences were found in the distance between the gingival zeniths of #23-#33 (DZL_3) for the plaster models and at #17-#43 (DZCM_1) for the printed models. In evaluation for reproducibility, the plaster models showed significant differences between operators at midline, and printed models showed significant differences at 7 measurements including #17-#47 (DZR_7). Conclusions: The validity and reliability of intermaxillary relationships as determined by the printed model were clinically acceptable, but the evaluation of reproducibility revealed significant inter-operator differences. To use printed models as substitutes for plaster models, additional studies on their accuracies in measuring intermaxillary relationship are required.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.6
• /
• pp.1052-1062
• /
• 2021

This study aims to confirm the possibility of Ultra-Violet (UV)-printed 3D printing materials using thermal polyurethane (TPU) with CMYK colors by applying an eco-friendly UV digital printing process. A UV-printed 3D printing TPU material was prepared with cycles of UV printing and CMYK colors. Dyeability of the 3D TPU samples with cycles of UV printing and CMYK were analyzed for thickness, weight, surface roughness, reflectance, colorimetry, and K/S values. The thickness and weight of 3D-printed TPU samples with cycles of UV printing are increased with overprints from 1 to 5. The surface roughness of 3D-printed TPU samples with increasing UV prints were decreased, meaning that the surface of TPU samples becomes gradually smoother. The reflectance spectra of CMYK UV-printed TPU samples showed the surface reflectance within each characteristic wavelength of CMYK. The 3D-printed TPU samples, subjected to UV printing twice or more, showed low surface reflectance. After examining the L^*a^*b^* of the 3D-printed TPU samples by the cycles of UV printing, the study found that the more UV got printed more than 2 times, the closer the color to each CMYK.