• IEIE Transactions on Smart Processing and Computing
• /
• v.1 no.1
• /
• pp.17-26
• /
• 2012

This paper presents an image processing-based validation method for unrecognizable numbers in severely distorted license plate images which have been degraded by various factors including low-resolution, low light-level, geometric distortion, and periodic noise. Existing vehicle license plate recognition (LPR) methods assume that most of the image degradation factors have been removed before performing the recognition of printed numbers and letters. If this is not the case, conventional LPR becomes impossible. The proposed method adopts a novel approach where a set of reference number images are intentionally degraded using the same factors estimated from the input image. After a series of image processing steps, including geometric transformation, super-resolution, and filtering, a comparison using cross-correlation between the intentionally degraded reference and the input images can provide a successful identification of the visually unrecognizable numbers. The proposed method makes it possible to validate numbers in a license plate image taken under low light-level conditions. In the experiment, using an extended set of test images that are unrecognizable to human vision, the proposed method provides a successful recognition rate of over 95%, whereas most existing LPR methods fail due to the severe distortion.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.3
• /
• pp.90-95
• /
• 2015

This study presents a method to test quite small-sized and light-weighted micro-drill bits which are used to make holes in printed circuit boards(PCB). After getting images of micro-drill bits through the high resolution microscope, we developed image processing algorithms to detect fiducial points, and then measured diverse factors of the drill-bit based on these points. We also developed the window-based inspection system to automatically discriminate normal and abnormal status. For the relative comparison of its performance, the system was compared with an existing inspection system using test images. Experimental results showed that the proposed system slightly improved performance, and also classified correctly some misjudged errors which were occurred in the existing system.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.1 s.113
• /
• pp.27-33
• /
• 2006

Newsprint is quantitatively the most important printing paper. The demands for its printability are continuously increasing. It is well known that the relationship between the physically tested paper properties and newspaper printability is unsatisfactory. In order to improve the printing quality of Korean newsprint, the printability coefficients such as maximum ink requirement(Ymax), print through were investigated. Kinds of newspapers and black printing ink were tested by IGT printability tester. Experiment condition of IGT printability tester was 14 steps between $0.2{\sim}2.8g/m^2$ of ink requirement, printing pressure was 200 N and printing velocity was 1 m/sec. The properties of newspaper samples (basis weight, bulk density, roughness, smoothness, porosity, i. e.) were examined in accordance with KS and TAPPI standard testing methods. The result of this study are respected for usefulness printing quality management of Korean newsprint.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.805-814
• /
• 1998

An efficient image processing algorithm is proposed to recognize both the height and width modulated barcodes which are rotated and printed at an arbitrary position. The main feature of this algorithm is to utilize the gradient information of a rotated barcode with a Sobel operator. The barcode area is extracted using the gradient information, and the barcode is decoded from the binary image of the extracted area. Theis algorithm is successfully applied to the 4 state and width modulated barcodes. It takes 0.86 secoden to process a letter, and the recognition rate reaches above 98% under various testing conditions. Since both the width and height modulated barcodes are processed with the proposed algorithm, it can be applied to postal service automation.

• Journal of the Korean Society of Costume
• /
• v.65 no.5
• /
• pp.88-102
• /
• 2015

The purpose of this study is to investigate the examples of using illustration as a strategic factor of composing brand cultures and as a factor for brand identity design. Through analyzing the external characteristics and the internal characteristics of illustration, this study will give suggestions on ways to apply the examples to real design. Illustration in external characteristics is investigated as a case of applying it directly to fashion design and to fashion marketing. Most of the fashion items were printed or weaved and most of the bags, shoes, and accessories were printed on the cover, attached as a patch, and expressed three-dimensionally. Illustration in internal characteristics is investigated as fixing and expansion of brand image, improving artistic and emotional value of brand, vitalization of masstige items, and cultural support and expression of social responsibility. The three themes used to develop the illustrations of "Hello ZIBI", which was used in this study, were "Graphic", "Forest" and "Flower", and these were based on modified brand symbol. Casual brands grafted fashion item designs onto T-shirts, bags, hats, and scarves. Marketing items were designed as shopping bags that could reflect brand image, as well as other items, such as key holders, mug cups, and tumblers, with designs that targeted specific age groups.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.2.1-2.7
• /
• 2018

With the development of computer-aided design/computer-aided manufacturing (CAD/CAM) technology, it has been possible to reconstruct the cranio-maxillofacial defect with more accurate preoperative planning, precise patient-specific implants (PSIs), and shorter operation times. The manufacturing processes include subtractive manufacturing and additive manufacturing and should be selected in consideration of the material type, available technology, post-processing, accuracy, lead time, properties, and surface quality. Materials such as titanium, polyethylene, polyetheretherketone (PEEK), hydroxyapatite (HA), poly-DL-lactic acid (PDLLA), polylactide-co-glycolide acid (PLGA), and calcium phosphate are used. Design methods for the reconstruction of cranio-maxillofacial defects include the use of a pre-operative model printed with pre-operative data, printing a cutting guide or template after virtual surgery, a model after virtual surgery printed with reconstructed data using a mirror image, and manufacturing PSIs by directly obtaining PSI data after reconstruction using a mirror image. By selecting the appropriate design method, manufacturing process, and implant material according to the case, it is possible to obtain a more accurate surgical procedure, reduced operation time, the prevention of various complications that can occur using the traditional method, and predictive results compared to the traditional method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.166-169
• /
• 2017

Currently, studies using Deep Learning are actively carried out showing good results in many fields. A template matching method is mainly used to recognize parts mounted on PCB(Printed Circuit Board). However, template matching should have multiple templates depending on the shape, orientation and brightness. And it takes long time to perform matching because it searches for the entire image. And there is also a disadvantage that the recognition rate is considerably low. In this paper, we use the Faster-RCNN method for recognizing PCB components as machine learning for classifying several objects in one image. This method performs better than the template matching method, execution time and recognition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.3
• /
• pp.554-559
• /
• 2009

This paper proposes a new method of weighted template matching fur machine-printed numeral recognition. The proposed weighted template matching, which emphasizes the feature of a pattern using adaptive Hamming distance on local feature areas, improves the recognition rate while template matching processes an input image as one global feature. The experiment compares confusion matrices of the template matching, error back propagation neural network classifier, and the proposed weighted template matching respectively. The result shows that the proposed method improves fairly the recognition rate of the machine-printed numerals.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.6-10
• /
• 2021

Recognition of characters printed or marked on the PCB components from images captured using cameras is an important task in PCB components inspection systems. Previous optical character recognition (OCR) of PCB components typically consists of two stages: character segmentation and classification of each segmented character. However, character segmentation often fails due to corrupted characters, low image contrast, etc. Thus, OCR without character segmentation is desirable and increasingly used via deep neural networks. Typical implementation based on deep neural nets without character segmentation includes convolutional neural network followed by recurrent neural network (RNN). However, one disadvantage of this approach is slow execution due to RNN layers. LPRNet is a segmentation-free character recognition network with excellent accuracy proved in license plate recognition. LPRNet uses a wide convolution instead of RNN, thus enabling fast inference. In this paper, LPRNet was adapted for recognizing characters printed on PCB components with fast execution and high accuracy. Initial training with synthetic images followed by fine-tuning on real text images yielded accurate recognition. This net can be further optimized on Intel CPU using OpenVINO tool kit. The optimized version of the network can be run in real-time faster than even GPU.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.20 no.1
• /
• pp.146-158
• /
• 2002

JPEG is good for full color representation but is poor in quality of image because of the small size and the losing compression ways. GIF is a kind of format style made for image - transmission in Compuserve which is a method of PC communication in U. S. A and now is used in world wide web owing to the efficiency of file compression and transmission. But GIF only is used 256 colors, so the images in web has a poorer quality of colors effect to be compared with those of printed catalogues. Also there can be licence problems when the images is used for commercial uses because the possession is Compuserve. The PNG is a way that the total advantages of JPEG and GIF. PNG image file is a more skillful (bitmap display unit), shows a high quality image like TIFF image about, gives superior compression , a 10% to 30% represents full color, 256 color, gray like JPEG. GIF file which uses LZW compression file is a thing which pays licence, In other hands, PNG is free from licence and more skillful image processing method against image error, and it is possible to conserve the color information. Therefore, this treatise is about how various images which are utilized for commercial printings in web, can be made into PNG files about the compression file. And the representation of image by compared the G]U images with JPEG images as well as compression file and the representation of image the superiority of color representation. In addition, 1 check out how much ranges the PNG files are available for electronic publish printing.