• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1473-1476
• /
• 2019

PCB (Printed Circuit Board)를 설계할 때 정확한 재료 정보는 매우 중요하다. 전투함의 통합 마스트 (Integrated Mast)에서는 스텔스 기능을 위해 열 저감이 필수적이며 이를 위해서는 내부의 제어 장치에서 발생하는 열을 최대한 줄여야 한다. 제어 장치는 대부분 PCB로 이루어져 있으나 PCB의 유전상수 (Dk, Dielectric Constant)가 정확하게 알려져 있지 않아 임피던스 부정합이 발생하며 이는 열 발생을 매우 증가시킨다. 본 논문에서는 Dk의 측정 방법에 대해 살펴보고 동작 주파수에 따른 Dk 값의 변화가 임피던스 부정합에 미치는 영향을 살펴본다.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.874-877
• /
• 2018

인쇄 회로 기판(PCB: printed circuit board)에는 다수의 표면 실장 부품(SMD: surface mount device)이 장착되어 상호 연결되며, 이들을 연결하는 배선의 전송 특성이 나빠지면 시스템의 성능이 감소하게 된다. PCB와 SMD를 연결하는 패드는 PCB 전송 특성에 큰 영향을 미치기 때문에 패드의 위치도 최적화되어야 한다. 본 논문에서는 패드 정렬이 PCB 전송 특성에 미치는 영향을 시뮬레이션 하였다. 주파수가 비교적 낮은 경우에는 패드 정렬이 PCB 전송 특성에 큰 영향을 미치지 않지만 주파수가 높아지거나 패드 크기가 커질수록 패드 정렬에 따른 영향이 커진다. 따라서 목표 주파수와 패드 크기에 따라 세심하게 패드 정렬을 선택할 필요가 있다. 특히 12~18 GHz의 Ku-밴드 주파수 대역에서는 기존의 중앙 정렬 패드보다 제안하는 측면 정렬 패드가 전체적으로 유리하다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.674-675
• /
• 2016

본 논문에서는 전기 및 전자 쓰레기의 대책으로 Printed Circuit Board (PCB) 부착형 Radio-Frequency Identification (RFID) 태그 칩을 이용한 사물인터넷 디바이스 생산 공정에 대한 모델을 제안한다. 전기 및 전자제품은 PCB 부품실장 공정과 검사가 필요하다. 또한 현재 제조사들이 사용하는 바코드 시스템은 Surface Mount Technology (SMT)공정이 완료되기 전까지 PCB 이력 관리가 불가능하다. 논문에서 제안한 PCB 부착형 RFID 태그 칩을 이용한 사물인터넷 디바이스 생산 공정 모델은 바코드 방식과 같은 출력-부착 단계가 필요하지 않다. 태그 칩은 각 단계의 공정 데이터가 기록될 수 있고, 데이터베이스 시스템 (DBMS) 접속 횟수를 현격히 줄일 수 있다.

• 센서학회지
• /
• 제18권5호
• /
• pp.359-364
• /
• 2009

This paper presents flexible electrocardiography(ECG) sensors using micro electro mechanical systems(MEMS) and flexible printed circuit(FPC) technology. By using FPC technology, ECG sensors which consisted of an outer hook-shaped electrode and an inner circular-shaped electrode were fabricated on the polyimide substrate. Thereafter, the bipolar ECG sensor was miniaturized using MEMS technology. The ECG measurement capability was examined by attaching the sensor to the human chest and wrist. Performance of the proposed sensors was then compared with ECG measured by commercial Ag/AgCl electrodes. It was verified that ECG could be measured using proposed sensors at only single body.

• 한국전기전자재료학회논문지
• /
• 제27권10호
• /
• pp.673-677
• /
• 2014

In this paper, thermal analysis of HDU (Heat Dissipation Unit) for infrared CCTV is performed by using SolidWorks Simulation (Thermal analysis) package, in order to change the part materials and HDU shape is optimized. Furthermore, HDU disperses the aggregated heat around the LED inside the housing. The junction temperature of infrared LED checked by HDU check was $65.83^{\circ}C$, $42.02^{\circ}C$, respectively. In addition, the Thermoelement by changing the shape of the HDU was possibly designed and equipped with. Comparison with simulation and prototype measurement results, without HDU model was $65.83^{\circ}C$, $61.99^{\circ}C$, respectively. In addition to with HDU model was $42.02^{\circ}C$, $39.01^{\circ}C$, respectively. Only HDU mounted into infrared CCTV is usable in the ordinary house or outdoors. Also HDU with thermal element, fan mounted into infrared CCTV is usable in a blast furnace workplace or high temperature workplace.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.187-190
• /
• 1998

In this paper a probe for the' measurement of dielectric properties of dielectric sheet materials is designed and implemented as a coaxial air line type. Using the broadband impedance method with this measurement probe the dielectric constant and loss tangent of the glass-epoxy and teflon are determined in the frequency range of 0.1 - l.O[GHz] with the temperature variation from $25[^{\circ}C]$ up to $65[^{\circ}C]$. A measured relative dielectric constant of the glass-epoxy is 4.42 and a loss tangents is 0.019 relatively, and the relative dielectric constants of teflon is 2.17 and a loss tangents is 0.002 relatively

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.450-452
• /
• 2001

In this paper, we proposed the automatic postal drop-off system based on the microprocessor board or PC. The weight of the small postal package is transmitted from the electronic scale and user-entered addresses and delivery rate are processed by the controller to calculate the fee. For 24 hour out-door operation and maintenance, non-cash payment methods such as credit card payment is used. The post stamp and receipt are printed by the thermal printer. For the electronic processing of the parcel, serial code is also printed on the stamp and receipts in bar code format. The parcel information obtained by the automatic postal drop-off system is transferred to remote central system by dial-up modem shared by the on site office. The proposed system and its control software are built for prototype model operation and the result met the design requirements. For real time processing, data reception through three serial ports is handled by interrupt routine. The proposed system is expected to be applied for commercial logistics system and pc automation system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.265-269
• /
• 1996

In this paper, electric field interference was analyzed in the Printed Circuit Board to restrain the elcctromagnetic wave using Boundary Element Method and Finite Element Method. First, charge density distribution was simulated using Boundary Element Method and the characteristic impedance was caculated to restrain the reflex wave, and mutual capacitance was caculated in the multi-strip line PCB. Finally, electric field was simulated in the variable patterns using Finite Element Method. As a result, the optimal structure and characteristics of strip line was obtained and the imformations about the optimal design pattern could be obtained with the analysing the feild distribution.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.135-138
• /
• 1998

This paper presents the results of measured permittivity of PCB sheet material in the frequency range of 0.1[GHz] - 2[GHz] and temperature range of $25[^{\circ}C]$ - $85[^{\circ}C]$. Microstrip lines with different physical length are implemented to measure the attenuation and phase shift of the signals though these lines. The loss factor of these materials could be obtained with the dielectric constant and the attenuation of the microstrip lines.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.61-66
• /
• 2012

Linear motors has been developed for factory automation, transportation applications, among other applications. As the trend toward compact sizes in micro electronic products progresses, the required motor drives in these applications need to be downsized with increased power densities. It appears that the winding of miniature linear motors is the most awkward part to be scaled down from conventional motor designs when miniaturizing. This paper presents an alternative design for slotless linear motors. A novel flexible printed circuit winding has been applied to obtain a simplified but qualified result. Having explained the prototyping and inspection, a discussion is given to examine the achievement of this study.