• 제목/요약/키워드: printed antenna

검색결과 209건 처리시간 0.025초

십자형 급전선을 갖는 광대역 마이크로스트립 슬롯 안테나의 특성 분석 (The Analysis of Wideband Microstrip Slot Antenna with Cross-shaped Feedline)

  • 장용웅;한석진;신호섭;김명기;박익모;신철제
    • 대한전자공학회논문지TC
    • /
    • 제37권3호
    • /
    • pp.35-42
    • /
    • 2000
  • 본 논문에서는 십자모양의 마이크로스트립 급전선을 사용하여 슬롯 폭이 넓은 경우 기존의 급전선 구조보다 쉽게 정합을 이룰 수 있는 방법을 제시하였다. 마이크로스트립 안테나의 단점인 좁은 대역폭을 확장시켰으며, FDTD법을 이용하여 십자형 급전구조를 갖는 광대역 마이크로스트립 슬롯 안테나의 특성을 해석하고, 최대 대역폭을 갖는 안테나를 제작 및 실험하였다. FDTD법으로 모델링하여 전계분포를 시간영역에서 계산하였고, 이를 Fourier변환시켜 슬롯 안테나의 반사손실, 전압 정재파비, 입력 임피던스, 복사패턴을 주파수 영역에서 계산하였다. 슬롯의 폭(Ws), 수평 급전선의 길이(l/sub d/)와 수직 급전선의 길이(l/sub u/), 그리고 offset에 따라 대역폭이 변화하였다. 이러한 결과로부터 최적화할 때, 전압 정재파비가 2이하인 대역폭은 1.975 GHz에서 4.725 GHz로 약 1.3 옥타브의 광대역 특성을 얻었다.

  • PDF

A Highly Efficient Rectenna Using Harmonic Rejection Capability

  • Kim, Youg-Hwan;Lim, Sung-Joon
    • Journal of electromagnetic engineering and science
    • /
    • 제11권4호
    • /
    • pp.257-261
    • /
    • 2011
  • A highly efficient 2.4 GHz rectenna is designed using a harmonic rejection bandpass filter. The rectenna is printed on Rogers Duroid 5880 substrate with ${\varepsilon}_r$=2.2 and a thickness of 1.6 mm. The rectenna consists of a microstrip antenna and high order harmonic rejection bandpass filter, microstrip lowpass filter, and Schottky barrier diode (HSMS2820). The use of a $2^{nd}$ and $3^{rd}$ harmonic rejection microstrip bandpass filter in the rectenna results in high conversion efficiency. The proposed rectenna achieves a RF to DC conversion efficiency of 72.17 % when the received RF power is 63.09 mW.

고지향성 구현을 위한 K-밴드 $4{\times}4$ 마이크로스트립 패치 어레이 안테나의 설계 (The Design of $4{\times}4$ Microstrip Patch Array Antenna of K-Band for the High Directivity)

  • 이하영;제프리 브론스타인;김형석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
    • /
    • pp.1613-1614
    • /
    • 2006
  • In this paper, a $4{\times}4$ rectangular patch array antenna operated at 20 GHz is implemented for the satellite communication. Two $2{\times}2$ subarrays are designed and more efficient $2{\times}2$ subarray is used for the design of $4{\times}4$ patch array. The sixteen patch antennas and microstrip feeding line are printed on the single-layered substrate. The spacing between the array elements is chosen to be $0.736{\lambda}$. HPBW (Half-Power Beam Width) is 17.6 degrees in the E-plane and 18.7 degrees in the H-plane with a gain of 17.2SdBi in the simulation results.

  • PDF

인쇄형 결합급전 무선랜 안테나 (A printed coupled-feed WLAN antenna)

  • 채규수;임중수
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2004년도 춘계학술대회
    • /
    • pp.203-205
    • /
    • 2004
  • 본 논문에서는 휴대용 무선기기에 응용 될 수 있는 이중대역 무선랜 안테나가 소개되었다. 소개된 디자인은 두개의 방사부를 가지는 1/4파장 안테나를 모델로 개발되었다. 수치해석 결과에 따라 견본안테나가 제작되었고 최적의 특성을 얻기 위해 몇 번의 수정을 거친 후에 본 논문에서 제안된 안테나가 제작되었다. 본 논문에서 제안된 안테나는 2.4/5GH 주파수 대역에서 동작하고 주로 노트북PC에 장착되어 사용 될 수 있다. 제시된 모든 결과들은 실제 실험용 노트북PC에 장착된 상태에서 얻어진 것이다.

  • PDF

원형편파를 갖는 원형 링 마이크로스트립 슬롯 안테나 (Printed Annular Ring Slot Antenna for Circular Polarization)

  • 이태훈;김명석;김영두;이홍민
    • 한국전자파학회논문지
    • /
    • 제14권1호
    • /
    • pp.75-80
    • /
    • 2003
  • 본 논문에서는 기존 원형 링 마이크로스트립 슬롯 안테나의 방사소자 일부를 제거하고, 길이가 서로 다른 십자슬롯을 부설하여 원형편파를 구현하고, 안테나 크기를 소형화시킨 새로운 구조의 안테나를 제안하였다. 급전구조는 입력단 설계가 간단하고 정합이 쉬운 전자파 결합방식을 사용하였고, Ansoft HFSS V8.0으로 최적화한 후 제작 및 측정하였다. 제안된 안테나는 GPS(1.5 GHz)대역에서 1.9 %의 축비 대역폭(AR$\leq$3 dB)을 나타내었고, LHCP$.$RHCP 각각의 구조에서 7.74 %의 임피던스 대역폭(VSWR$\leq$2)을 나타내었다. 이는 기존의 원형링 마이크로스트립 슬롯 안테나의 임피던스 대역폭 및 축비 특성을 보다 더 개선한 것이다.

Compact Circularly Polarized Composite Cavity-Backed Crossed Dipole for GPS Applications

  • Ta, Son Xuat;Han, Jae Jin;Park, Ikmo
    • Journal of electromagnetic engineering and science
    • /
    • 제13권1호
    • /
    • pp.44-50
    • /
    • 2013
  • In this paper, we present a circularly polarized (CP) composite cavity-backed crossed dipole antenna for global positioning system (GPS) applications. We produce the CP radiation by crossing two dipoles through a $90^{\circ}$ phase delay line of a vacant-quarter printed ring, which also has a broadband impedance matching characteristic. Two techniques, insertion of meander lines in the dipole arm and arrowhead-shaped trace at its end, are employed to reduce the sizes of the primary radiation element. The compact radiator is backed by a cavity reflector to achieve a wide CP radiation beamwidth. The proposed antenna exhibits a measured bandwidth of 1.450~1.656 GHz for a voltage standing wave ratio (VSWR) < 2 and 1.555~1.605 GHz for AR < 3-dB. At 1.575 GHz, the antenna has a gain of 7 dBic, a frontto-back ratio of 27 dB, AR of 1.18 dB, and 3-dB AR beamwidths of $130^{\circ}$ and $132^{\circ}$ in the x-z and y-z planes, respectively.

3차원 트랜지션을 이용한 광대역 마이크로스트립 패치 안테나의 설계 (A Design of the Wideband Microstrip Patch Antenna Using Three-dimensional Transition)

  • 정창권;강치운;윤서용;이봉석;김우수;이문수
    • 한국정보통신학회논문지
    • /
    • 제3권2호
    • /
    • pp.305-311
    • /
    • 1999
  • 본 논문에서는 유전율 1.06, 두께 $\lambda$/4인 발포체 기판상의 얇은 필름에 인쇄한 새로운 형태의 단일층 마이크로스트립 패치 안테나를 설계했다. 안테나의 대역폭이 광대역 임피던스정합을 얻기 위하여 3차원 트랜지션을 사용한다. 안테나의 방사패턴 및 반사손실, 전압정재파비는 "IE3D" 시뮬레이션 패키지를 사용하여 계산하여 측정결과와 비교했다. 측정 결과 전압정재파비 $\le$ 2:1 인 대역폭이 중심주파수 6.8 GHz에서 약 65%로 광대역 안테나임을 입증하였다. 그리고 반사손실 및 전압정재파비는 계산치와 실험치가 거의 일치하였다. 거의 일치하였다.

  • PDF

인덕티브 브릿지를 가진 WLAN 이중 대역 이중 사각 패치 안테나 (Double Square Patch Antenna with Inductive Bridges for WLAN Dual-Band)

  • 양찬우;정창원
    • 한국산학기술학회논문지
    • /
    • 제10권10호
    • /
    • pp.2615-2618
    • /
    • 2009
  • 본 논문에서는 WLAN 11 a/b/g 대역(2.4 GHz/5.5 GHz)용 4개의 브릿지(bridge)를 가진 이중 사각 패치(double rectangular patch) 안테나를 소개 하였다. 5.5 GHz 주파수 대역용 평면형 사각 패치는 이중 대역동작을 위해 2.4 GHz에서 동작하는 외부 사각 패치와 4개의 인덕티브 브릿지(inductive bridge)를 통해 연결되어 있다. 제안된 안테나는 4개의 인덕티브 브릿지의 넓이를 가변 하여 사용 주파수 대역을 튜닝 할 수 있으며, 안테나의 최대 이득은 5.5 GHz 주파수 대역에서 3.7 dBi 이고 2.4 GHz 주파수 대역에서는 5 dBi이다.

고이득 구현을 위한 K-밴드 $4{\times}4$ 마이크로스트립 패치 어레이 안테나의 설계 (The Design of $4{\times}4$ Microstrip Patch Array Antenna of K-Band for the High Gain)

  • 이하영;제프리 브론스타인;김형석
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2006년도 하계학술대회
    • /
    • pp.193-196
    • /
    • 2006
  • In this paper, two $4{\times}4$ rectangular patch array antennas operated at 20 GHz are implemented for the satellite communication. Two $2{\times}2$ sub-arrays are designed and used for the design of $4{\times}4$ patch array. The sixteen patch antennas and microstrip feeding line are printed on the single-layered substrate. The spacing between the array elements is chosen to be $0.736{\lambda}$. The HPBW(Half Power Beam Width) of the $4{\times}4$ microstrip patch array is 17.01 degrees in the E-plane and 17.71 degrees in the H-plane with a gain of 11.6dB in the experimental results. The HPBW of the recessed $4{\times}4$ microstrip patch array is 18.66 degrees in E-plane and 17.12 degrees in the H-plane with a gain of 12.55dB in the experimental results.

  • PDF