• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.6
• /
• pp.497-504
• /
• 2014

The digital signage display is actively researched as the next generation of large FPD. To commercialize those digital signage display, the manufacturing cost must be downed with printing method instead of conventional photolithography. Here, we demonstrate a reverse offset printed TFT electrodes for the digital signage display. For the fabricated source/drain and gate electrode, we used Ag ink, silicone blanket, Clich$\acute{e}$ and reverse offset printer. We printed uniform TFT electrode patterns with narrow line width(10 ${\mu}m$ range) and thin thickness(nm range). In the end the printing source/drain and gate electrode are successfully achieved by optimization of experimental conditions such as Clich$\acute{e}$ surface treatment, ink coating process, delay time, off/set process and curing temperature. Also, we checked that the printing align accuracy was within 5 ${\mu}m$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.63.1-63.1
• /
• 2012

In recent years, the functional inks for printed electronics that can be combined with a variety of printing techniques have attracted increasingly significant interest for use in low cost, large area, high performance integrated electronics and microelectronics. In particular, the development of solution-processable conductor, semiconductor and insulator materials is of great importance as such materials have decisive impacts on the electrical performance of various electronic devices, and, therefore, need to meet various requirements including solution processability, high electrical performance, and environmental stability. Semiconductor inks such as IGO, CIGS are synthesized by chemical solution method and microwave reaction method for TFT and solar cell application. Fine circuit pattern with high conductivity, which is valuable for flexible electrode for PCB and TSP devices, can be printed with highly concentrated and stabilized conductor inks such as silver and copper. Solution processed insulator such as polyimide derivatives can be use to all printed TFT device. Our research results of functional inks for printed electronics provide a recent trends and issues on this area.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.66.1-66.1
• /
• 2012

Although all printed cost-less radio frequency identification (RFID) tags have been considered as a core tool for bringing up a ubiquitous society, the difficulties in integrating thin film transistors (TFTs), diodes and capacitors on plastic foils using a single in-line printing method nullify their roles for the realization of the ubiquitous society1,2. To prove the concept of all printed cost-less RFID tag, the practical degree of the integration of those devices on the plastic foils should be successfully printed to demonstrate multi bit RFID tag. The tag contains key device units such as 13.56 MHz modulating TFT, digital logic gates and 13.56 MHz rectifier to generate and transfer multi bit digital codes via a wireless communication (13.56 MHz). However, those key devices have never been integrated on the plastic foils using printing method yet because the electrical fluctuation of fully printed TFTs and diodes on plastic foils could not be controlled to show the function of desired devices. In this work, fully gravure printing process in printing 13.56 MHz operated 32 bit RFID tags on plastic foils has been demonstrated for the first time to prove all printed RFID tags on plastic foils can wirelessly generate and transfer 32 bit digital codes using the radio frequency of 13.56 MHz. This result proved that the electrical fluctuations of printed TFTs and diodes on plastic foils should be controlled in the range of maximum 20% to properly operate 32 bit RFID tags.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1216-1219
• /
• 2007

We have been developing printed organic TFTs for flexible displays. In this study, we have pay attention to the operation stability improvement of the organic TFTs, and studied several factors especially depending on the dielectric layers. From the detailed analysis of the effects of dielectric layers, we have proposed a new printed dielectric layer which is mainly consisting of metal oxide and gives high operation stability

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.1.1-1.1
• /
• 2011

Printed electronics based on the direct writing of solution processable functional materials have been of paramount interest and importance. In this talk, the synthesis of printable inorganic functional materials (conductors and semiconductors) for thin-film transistors (TFTs) and photovoltaic devices, device fabrication based on a printing technique, and specific characteristics of devices are presented. For printable conductor materials, Ag ink is designed to achieve the long-term dispersion stability and good adhesion property on a glass substrate, and Cu ink is sophisticatedly formulated to endow the oxidation stability in air and even aqueous solvent system. The both inks were successfully printed onto either polymer or glass substrate, exhibiting the superior conductivity comparable to that of bulk one. In addition, the organic thin-film transistor based on the printed metal source/drain electrode exhibits the electrical performance comparable to that of a transistor based on a vacuum deposited Au electrode. For printable amorphous oxide semiconductors (AOSs), I introduce the noble ways to resolve the critical problems, a high processing temperature above $400^{\circ}C$ and low mobility of AOSs annealed at a low temperature below $400^{\circ}C$. The dependency of TFT performances on the chemical structure of AOSs is compared and contrasted to clarify which factor should be considered to realize the low temperature annealed, high performance AOSs. For photovoltaic application, CI(G)S nanoparticle ink for solution processable high performance solar cells is presented. By overcoming the critical drawbacks of conventional solution processed CI(G)S absorber layers, the device quality dense CI(G)S layer is obtained, affording 7.3% efficiency CI(G)S photovoltaic device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1631-1633
• /
• 2008

We demonstrate 4-in QVGA active-matrix electrophoretic display based on ink-jet printed organic transistors on glass substrates. Our TFT array had a bottom-gate, bottom-contact device architecture. The organic semiconductor and gate dielectric were solution processed. The field-effect mobility of the printed devices, calculated in the saturation region, was $0.1{\sim}0.3cm^2/Vs$ at Vg=-20 V.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.271-274
• /
• 2011

Screen-printed source and drain electrodes were used for a spin-coated and inkjet-processed zinc-tin oxide (ZTO) TFTs for the first time. Source and drain were silver nanoparticles. Channel length was patterned using screen printing technology. Different silver nanoinks and process parameters were tested to find optimal source and drain contacts Relatively good electrical properties of a screen-printed inkjet-processed oxide TFT were obtained as follows; a mobility of 1.20 $cm^2$/Vs, an on-off current ratio of $10^6$, a Vth of 5.4 V and a subthreshold swing of 1.5 V/dec.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.697-699
• /
• 2005

The need for low cost flexible TFT display backplanes has focused attention on new processing techniques and materials. We have developed backplane technology based entirely on jet-printing, using a combination of additive and subtractive processing, and have applied this technique to both amorphous silicon and polymer TFT arrays.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.875-877
• /
• 2007

Zinc tin oxide (ZTO) sol-gel solution was synthesized for ink-jet printable semiconducting ink. Bottom-contact type TFT was produced by printing the ZTO layer between the source and drain electrodes. The transistor involving the ink-jet printed ZTO had the $mobility\;{\sim}\;0.01\;cm^2V^{-1}s^{-1}$. We demonstrated the direct-writing of semiconducting oxide for solution processed TFT fabrication.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1463-1465
• /
• 2008

We report all-ink-jet printed inorganic/organic hybrid TFTs on plastic substrates. We have investigated the optimal printing conditions to make uniform patterned layers of gate electrode, dielectrics, source/drain electrodes, and semiconductor as a coplanar type TFT in a successive manner. All ink-jet printed devices have good mechanical flexibility and current modulation characteristic even when bent.