• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.159-166
• /
• 2006

The aim of synchronization of production and transportation planning in the supply chain is to increase the flexibility and to decrease various costs. The suggested model in this study synchronizes the timing to supply to a downstream manufacturer directly after production and to be consumed in a downstream manufacturer right after receipt. This model deals with the frequent delivery in small amount which is a new trend of the transportation not governed the economy of scale principle. Moreover, various types of transportation governed by the economy of scale principle or not are considered. Then, the two-phase mathematical model is suggested to obtain optimal job sequence and production quantity for each tasks. But, it is difficult to gain optimal solutions if there is a transportation governed by the economy of scale principle in the supply chain, or the size of the problem is increased. Thus, heuristic algorithms based on simulated annealing and genetic algorithm are suggested to find good solutions in the reasonable time.

• Structural Engineering and Mechanics
• /
• v.74 no.4
• /
• pp.533-545
• /
• 2020

An optimal design method for a spoke double-layer cable-net structure (SDLC) is proposed in this study. Simplified calculation models of the SDLC are put forward to reveal the static responses under vertical loads and wind loads. Next, based on an energy principle, the relationship among the initial prestress level, cross-sectional areas of the components, rise height, sag height, overall displacement, and relative deformation is proposed. Moreover, a calculation model of the Foshan Center SDLC is built and optimized. Given the limited loading cases, material properties of the components, and variation ranges of the rise height and sag height, the self-weight and initial prestress level of the entire structure can be obtained. Because the self-weight of the cables decreases with increasing of the rise height and sag height, while the self-weight of the inner strut increases, the total weight of the entire structure successively exhibits a sharp reduction, a gradual decrease, a slow increase, and a sharp increase during the optimization process. For the simplified model, the optimal design corresponds to the combination of rise height and sag height that results in an appropriate prestress level of the entire structure with the minimum total weight.

• Journal of Environmental Science International
• /
• v.13 no.10
• /
• pp.929-938
• /
• 2004

Sludge discharger applied the principle of the air lift pump was investigated experimentally for the different design( diameter of discharge pipe, diameter and height of the inside and outside wall) and operating parameters(air flow rate, water level). And it was conducted that performance comparison about sludge discharger and conventional air lift pump. The result indicated that discharged liquid were increased with the increase of air flow rate and water level and decrease distance between inside and outside wall. The discharge pressure was increased with an increase of air flow rate and a decrease of the diameter of the discharge pipe, for both the sludge discharger and the airlift pump. The discharge pressures of the sludge discharger were 3-6 times higher than those of the air lift pump.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.3016-3020
• /
• 2009

The chemical bond parameters of Y-123, Eu-123, Pr-123 and Gd-123 compounds have calculated using the chemical bond theory of complex crystals. Their hardness have been predicted by the chemical bond definition of hardness. The calculated results indicate that the Ba-O and RE-O types of bond have a lower covalent character and the Cu-O types of bond have greater covalency. The hardness values increase as the unit cell volume of the rare earth superconductor structures decrease.

• Geomechanics and Engineering
• /
• v.10 no.1
• /
• pp.21-35
• /
• 2016

Employing non-associated flow rule and Power-Law failure criterion, the failure mechanisms of tunnel roof in homogeneous and layered soils are studied in present analysis. From the viewpoint of energy, limit analysis upper bound theorem and variation principle are introduced to study the influence of dilatancy on the collapse mechanism of rectangular tunnel considering effects of supporting force and seepage force. Through calculation, the collapsing curve expressions of rectangular tunnel which are excavated in homogeneous soil and layered soils respectively are derived. The accuracy of this work is verified by comparing with the existing research results. The collapsing surface shapes with different dilatancy coefficients are draw out and the influence of dilatancy coefficient on possible collapsing range is analyzed. The results show that, in homogeneous soil, the potential collapsing range decreases with the decrease of the dilatancy coefficient. In layered soils, the total height and the width on the layered position of possible collapsing block increase and the width of the falling block on tunnel roof decrease when only the upper soil's dilatancy coefficient decrease. When only the lower soil's dilatancy coefficient decrease or both layers' dilatancy coefficients decrease, the range of the potential collapsing block reduces.

• Journal of the Korea Society for Simulation
• /
• v.2 no.1
• /
• pp.55-66
• /
• 1993

Although the Pontryagin's maximum principle theory is widely applied in control problems, its contribution to the solution procedure have been restricted just to figure out the rough picture of true solutions, probably due to the complexity of the two-point boundary value problems. This paper discusses a numerical approach to solve the control problems in connection with the two -point boundary value problems. A model of labor management negotiation during a strike has been constructed and solved explicitly by us of DVCPR subroutine introduced in IMSL. The results have been turned out that the management is better increase wage very slowly during the strike period, while , on the labor side, it is more effective to show the high intensity of demonstration against the company at the outset and gradually decrease it.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1993.10a
• /
• pp.3-3
• /
• 1993

Although tile Pontryagin's maxlmum principle theory is widely applied in control problems, its contribution to the solution procedure have been restricted just to figure out the rough picture of true solutions, probably due to the complexity of the two-point boundary value problems.This paper discusses the numerical approach to solve the control problems in connection with the two-point boundary value problems. A model of labor-management negotiatulon during a strike has been constructed and solved explicitly by use of DVCPR subroutine introduced in IMSL. The results have been turned out that the management is better increase wage very slowly during the strike period, while, on the labor side, it is more effective to show the high intensity of demonstration against the company at the outset and gradually decrease it.

• Steel and Composite Structures
• /
• v.42 no.3
• /
• pp.375-388
• /
• 2022

In this work, limit elastic speed analysis of functionally graded porous rotating disks has been reported. The work proposes an effective approach for modeling the mechanical properties of a porous functionally graded rotating disk. Four different types of porosity models namely: uniform, symmetric, inner maximum, and outer maximum distribution are considered. The approach used is the variational principle, and the solution has been achieved using Galerkin's error minimization theory. The study aims to investigate the effect of grading indices, aspect ratio, porosity volume fraction, and porosity types on limit angular speed for uniform and variable disk geometries of constant mass. To validate the current study, finite element analysis has been used, and there is good agreement between the two methods. The study yielded a decrease in limit speed as grading indices and aspect ratio increase. The porosity volume fraction is found to be more significant than the aspect ratio effect. The research demonstrates a range of operable speeds for porous and non-porous disk profiles that can be used in industries as design data. The results show a significant increase in limit speed for an exponential disk when compared to other disk profiles, and thus, the study demonstrates a range of FG-based structures for applications in industries that will not only save material (lightweight structures) but also improve overall performance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.741-746
• /
• 2012

Transmission control protocol(TCP) widely used as a transport protocol in the Internet includes a loss recovery function that detects and recovers packet losses by retransmissions. The loss recovery function consists of the two algorithms; fast retransmit and fast recovery. There have been researches to avoid nonnecessary retransmission timeouts (RTOs), which leads to selective acknowledgement (SACK) option and limited transmit scheme that are standardized by IETF (Internet Engineering Task Force). Recently, a method that covers the case in which a retransmitted packet is lost again has been propsed. The method, however, is not proved in terms of the additive increase multiplicative decrease (AIMD) principle of TCP congestion control. In this paper, therefore, we analyzed the method in terms of the principle by ns-simulations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.11
• /
• pp.4405-4418
• /
• 2015

Different network provides different service. To maximize the profit, heterogeneous networks form a whole, which may either compete or cooperate with each other. In this paper, the healthcare monitor network architecture is introduced to build the competitive and cooperative mechanisms of heterogeneous networks which contain three networks, namely, cellular network, WLAN and WMAN. This paper considers the natural growth rate of the network with competitive and cooperative effects. Then, the stability of the proposed model and its equilibrium points are analyzed by the ordinary differential principle. Finally, simulation results show that the natural growth rate cannot increase the profit of the network, but effective cooperative among heterogeneous networks can increase the profit of each network, and competitive may decrease the profit of each network.