• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
• /
• pp.159-166
• /
• 2006

The aim of synchronization of production and transportation planning in the supply chain is to increase the flexibility and to decrease various costs. The suggested model in this study synchronizes the timing to supply to a downstream manufacturer directly after production and to be consumed in a downstream manufacturer right after receipt. This model deals with the frequent delivery in small amount which is a new trend of the transportation not governed the economy of scale principle. Moreover, various types of transportation governed by the economy of scale principle or not are considered. Then, the two-phase mathematical model is suggested to obtain optimal job sequence and production quantity for each tasks. But, it is difficult to gain optimal solutions if there is a transportation governed by the economy of scale principle in the supply chain, or the size of the problem is increased. Thus, heuristic algorithms based on simulated annealing and genetic algorithm are suggested to find good solutions in the reasonable time.

• Structural Engineering and Mechanics
• /
• 제74권4호
• /
• pp.533-545
• /
• 2020

An optimal design method for a spoke double-layer cable-net structure (SDLC) is proposed in this study. Simplified calculation models of the SDLC are put forward to reveal the static responses under vertical loads and wind loads. Next, based on an energy principle, the relationship among the initial prestress level, cross-sectional areas of the components, rise height, sag height, overall displacement, and relative deformation is proposed. Moreover, a calculation model of the Foshan Center SDLC is built and optimized. Given the limited loading cases, material properties of the components, and variation ranges of the rise height and sag height, the self-weight and initial prestress level of the entire structure can be obtained. Because the self-weight of the cables decreases with increasing of the rise height and sag height, while the self-weight of the inner strut increases, the total weight of the entire structure successively exhibits a sharp reduction, a gradual decrease, a slow increase, and a sharp increase during the optimization process. For the simplified model, the optimal design corresponds to the combination of rise height and sag height that results in an appropriate prestress level of the entire structure with the minimum total weight.

• 한국환경과학회지
• /
• 제13권10호
• /
• pp.929-938
• /
• 2004

Sludge discharger applied the principle of the air lift pump was investigated experimentally for the different design( diameter of discharge pipe, diameter and height of the inside and outside wall) and operating parameters(air flow rate, water level). And it was conducted that performance comparison about sludge discharger and conventional air lift pump. The result indicated that discharged liquid were increased with the increase of air flow rate and water level and decrease distance between inside and outside wall. The discharge pressure was increased with an increase of air flow rate and a decrease of the diameter of the discharge pipe, for both the sludge discharger and the airlift pump. The discharge pressures of the sludge discharger were 3-6 times higher than those of the air lift pump.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.3016-3020
• /
• 2009

The chemical bond parameters of Y-123, Eu-123, Pr-123 and Gd-123 compounds have calculated using the chemical bond theory of complex crystals. Their hardness have been predicted by the chemical bond definition of hardness. The calculated results indicate that the Ba-O and RE-O types of bond have a lower covalent character and the Cu-O types of bond have greater covalency. The hardness values increase as the unit cell volume of the rare earth superconductor structures decrease.

• Geomechanics and Engineering
• /
• 제10권1호
• /
• pp.21-35
• /
• 2016

Employing non-associated flow rule and Power-Law failure criterion, the failure mechanisms of tunnel roof in homogeneous and layered soils are studied in present analysis. From the viewpoint of energy, limit analysis upper bound theorem and variation principle are introduced to study the influence of dilatancy on the collapse mechanism of rectangular tunnel considering effects of supporting force and seepage force. Through calculation, the collapsing curve expressions of rectangular tunnel which are excavated in homogeneous soil and layered soils respectively are derived. The accuracy of this work is verified by comparing with the existing research results. The collapsing surface shapes with different dilatancy coefficients are draw out and the influence of dilatancy coefficient on possible collapsing range is analyzed. The results show that, in homogeneous soil, the potential collapsing range decreases with the decrease of the dilatancy coefficient. In layered soils, the total height and the width on the layered position of possible collapsing block increase and the width of the falling block on tunnel roof decrease when only the upper soil's dilatancy coefficient decrease. When only the lower soil's dilatancy coefficient decrease or both layers' dilatancy coefficients decrease, the range of the potential collapsing block reduces.

• 한국시뮬레이션학회논문지
• /
• 제2권1호
• /
• pp.55-66
• /
• 1993

Although the Pontryagin's maximum principle theory is widely applied in control problems, its contribution to the solution procedure have been restricted just to figure out the rough picture of true solutions, probably due to the complexity of the two-point boundary value problems. This paper discusses a numerical approach to solve the control problems in connection with the two -point boundary value problems. A model of labor management negotiation during a strike has been constructed and solved explicitly by us of DVCPR subroutine introduced in IMSL. The results have been turned out that the management is better increase wage very slowly during the strike period, while , on the labor side, it is more effective to show the high intensity of demonstration against the company at the outset and gradually decrease it.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1993년도 제3회 정기총회 및 추계학술발표회
• /
• pp.3-3
• /
• 1993

Although tile Pontryagin's maxlmum principle theory is widely applied in control problems, its contribution to the solution procedure have been restricted just to figure out the rough picture of true solutions, probably due to the complexity of the two-point boundary value problems.This paper discusses the numerical approach to solve the control problems in connection with the two-point boundary value problems. A model of labor-management negotiatulon during a strike has been constructed and solved explicitly by use of DVCPR subroutine introduced in IMSL. The results have been turned out that the management is better increase wage very slowly during the strike period, while, on the labor side, it is more effective to show the high intensity of demonstration against the company at the outset and gradually decrease it.

• Steel and Composite Structures
• /
• 제42권3호
• /
• pp.375-388
• /
• 2022

In this work, limit elastic speed analysis of functionally graded porous rotating disks has been reported. The work proposes an effective approach for modeling the mechanical properties of a porous functionally graded rotating disk. Four different types of porosity models namely: uniform, symmetric, inner maximum, and outer maximum distribution are considered. The approach used is the variational principle, and the solution has been achieved using Galerkin's error minimization theory. The study aims to investigate the effect of grading indices, aspect ratio, porosity volume fraction, and porosity types on limit angular speed for uniform and variable disk geometries of constant mass. To validate the current study, finite element analysis has been used, and there is good agreement between the two methods. The study yielded a decrease in limit speed as grading indices and aspect ratio increase. The porosity volume fraction is found to be more significant than the aspect ratio effect. The research demonstrates a range of operable speeds for porous and non-porous disk profiles that can be used in industries as design data. The results show a significant increase in limit speed for an exponential disk when compared to other disk profiles, and thus, the study demonstrates a range of FG-based structures for applications in industries that will not only save material (lightweight structures) but also improve overall performance.

• 한국전자통신학회논문지
• /
• 제7권4호
• /
• pp.741-746
• /
• 2012

인터넷에서 널리 사용되고 있는 수송 계층 프로토콜인 TCP(transmission control protocol)의 혼잡제어(congestion control) 기능은 손실된 패킷을 감지하고 복구하기 위한 손실 복구(loss recovery) 과정을 포함한다. 손실 복구 과정은 fast retransmit와 fast recovery 두 개의 알고리듬으로 이루어지는데 불필요한 재전송 타임아웃을 방지하기 위한 많은 연구가 이루어져 왔다. 그 결과로 최근에는 선택 승인(selective acknowledgement) 옵션과 제한 전송(limited transmit) 기법이 제안되어 IETF (Internet Engineering Task Force)의 표준 문서로 채택되었다. 최근에는 재전송된 패킷이 다시 손실되는 경우 발생하는 타임아웃을 방지하기 위한 재전송 손실 복구(lost retransmission detection)를 위한 방법이 제시되었다. 그러나 아직 재전송 손실 복구 기능의 TCP 혼잡 윈도우의 가장 기본적인 동작 원칙인 AIMD (additive increase multiplicative decrease) 측면에서의 분석이 되어 있지 않은 상태이다. 따라서 본 논문에서는 이를 고려한 재전송 손실 복구 알고리듬의 동작을 시뮬레이션을 통해 평가한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권11호
• /
• pp.4405-4418
• /
• 2015

Different network provides different service. To maximize the profit, heterogeneous networks form a whole, which may either compete or cooperate with each other. In this paper, the healthcare monitor network architecture is introduced to build the competitive and cooperative mechanisms of heterogeneous networks which contain three networks, namely, cellular network, WLAN and WMAN. This paper considers the natural growth rate of the network with competitive and cooperative effects. Then, the stability of the proposed model and its equilibrium points are analyzed by the ordinary differential principle. Finally, simulation results show that the natural growth rate cannot increase the profit of the network, but effective cooperative among heterogeneous networks can increase the profit of each network, and competitive may decrease the profit of each network.